Re: Re: (usagi-users 02263) Usagi kernel for MIPS target

Re: Re: (usagi-users 02263) Usagi kernel for MIPS target

[Santosh]

i tried compiling this way

# make ARCH=mips xconfig
i get
ERROR - Attempting to write value for unconfigured variable 
(CONFIG_VTAG_ICACHE)
ERROR - Attempting to write value for unconfigured variable 
(CONFIG_BINFMT_ELF32)
ERROR - Attempting to write value for unconfigured variable 
(CONFIG_SERIAL)
ERROR - Attempting to write value for unconfigured variable 
(CONFIG_RTC)

Don't know what's wrong.
I have configured for MIPS Malta (Experimental) board

then i did # make ARCH=mips dep

finally # make ARCH=mips CROSS_COMPILE=mipsel-linux-

Now i get
binfmt_elf.c: In function 'load_elf_interp':
binfmt_elf.c:278: 'EF_MIPS_ABI2' undeclared
binfmt_elf.c:278: 'EF_MIPS_ABI' undeclared
make[2]:Leaving directory '/home/user/usagi/kernel/linux24/fs'
make:***[_dir_fs]Error 2

Is Usagi stable on MIPS Malta board ??
Pls tell me what's wrong.

-Santosh
------------------------------------------


On Wed, 12 Mar 2003 KUNITAKE Koichi wrote :
>   Hello,
>
>On 12 Mar 2003 07:08:17 -0000
>"Santosh " <ipv6_san@rediffmail.com> wrote:
>
> >Can someone tell me what changes i have to make to compile 
>the
> >sources successfully for MIPS target ???
>
>   I have never compiled USAGI for MIPS target, but I think you
>should edit linux24/Makefile as following.
>
>
>--- Makefile.orig       2003-03-12 16:55:06.000000000 +0900
>+++ Makefile    2003-03-12 16:55:32.000000000 +0900
>@@ -5,7 +5,8 @@
>
>  
>KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
>
>-ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e 
>s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
>+#ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e 
>s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
>+ARCH := mips
>  KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e 
>"s/-//g")
>
>  CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; 
>\
>@@ -19,7 +20,7 @@
>  HOSTCC         = gcc
>  HOSTCFLAGS     = -Wall -Wstrict-prototypes -O2 
>-fomit-frame-pointer
>
>-CROSS_COMPILE  =
>+CROSS_COMPILE  = mips-linux-
>
>  #
>  # Include the make variables (CC, etc...)
>
>
>   Did this fail?
>
>Best regards,
>

__________________________________________________________
Great Travel Deals, Airfares, Hotels on
http://www.journeymart.com/rediff/travel.asp

Re: (usagi-users 02263) Usagi kernel for MIPS target

[Tiemo Krueger - mycable GmbH]

I had some time ago some trouble with xconfig, it seems that some
dependencies between configuration topics are not setup properly for MIPS
try the normal 'config' instead.
I remember that RTC was one of the appearing problems

Tiemo

Santosh wrote:

> i tried compiling this way
>
> # make ARCH=mips xconfig
> i get
> ERROR - Attempting to write value for unconfigured variable 
> (CONFIG_VTAG_ICACHE)
> ERROR - Attempting to write value for unconfigured variable 
> (CONFIG_BINFMT_ELF32)
> ERROR - Attempting to write value for unconfigured variable 
> (CONFIG_SERIAL)
> ERROR - Attempting to write value for unconfigured variable (CONFIG_RTC)
>
> Don't know what's wrong.
> I have configured for MIPS Malta (Experimental) board
>
> then i did # make ARCH=mips dep
>
> finally # make ARCH=mips CROSS_COMPILE=mipsel-linux-
>
> Now i get
> binfmt_elf.c: In function 'load_elf_interp':
> binfmt_elf.c:278: 'EF_MIPS_ABI2' undeclared
> binfmt_elf.c:278: 'EF_MIPS_ABI' undeclared
> make[2]:Leaving directory '/home/user/usagi/kernel/linux24/fs'
> make:***[_dir_fs]Error 2
>
> Is Usagi stable on MIPS Malta board ??
> Pls tell me what's wrong.
>
> -Santosh
> ------------------------------------------
>
>
> On Wed, 12 Mar 2003 KUNITAKE Koichi wrote :
>
>>   Hello,
>>
>> On 12 Mar 2003 07:08:17 -0000
>> "Santosh " <ipv6_san@rediffmail.com> wrote:
>>
>> >Can someone tell me what changes i have to make to compile the
>> >sources successfully for MIPS target ???
>>
>>   I have never compiled USAGI for MIPS target, but I think you
>> should edit linux24/Makefile as following.
>>
>>
>> --- Makefile.orig       2003-03-12 16:55:06.000000000 +0900
>> +++ Makefile    2003-03-12 16:55:32.000000000 +0900
>> @@ -5,7 +5,8 @@
>>
>>  
>> KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
>>
>> -ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ 
>> -e s/arm.*/arm/ -e s/sa110/arm/)
>> +#ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ 
>> -e s/arm.*/arm/ -e s/sa110/arm/)
>> +ARCH := mips
>>  KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e "s/-//g")
>>
>>  CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
>> @@ -19,7 +20,7 @@
>>  HOSTCC         = gcc
>>  HOSTCFLAGS     = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
>>
>> -CROSS_COMPILE  =
>> +CROSS_COMPILE  = mips-linux-
>>
>>  #
>>  # Include the make variables (CC, etc...)
>>
>>
>>   Did this fail?
>>
>> Best regards,
>>
>
> __________________________________________________________
> Great Travel Deals, Airfares, Hotels on
> http://www.journeymart.com/rediff/travel.asp
>
>
>


-- 
-------------------------------------------------------
Tiemo Krueger       Tel:  +49 48 73 90 19 86
mycable GmbH        Fax: +49 48 73 90 19 76
Boeker Stieg 43
D-24613 Aukrug      eMail: tk@mycable.de

Public Kryptographic Key is available on request
-------------------------------------------------------

Re: (usagi-users 02267) Re: Usagi kernel for MIPS target

[KUNITAKE Koichi]

  I think you cant use "xconfig" on Cross-compiling env, please edit
linux24/Makefile and use "make config". After all, please exec following
commands.

$ make config
$ make dep; make clean; make zImage

On 12 Mar 2003 08:49:46 -0000
"Santosh " <ipv6_san@rediffmail.com> wrote:

>i tried compiling this way
>
># make ARCH=mips xconfig
>i get
>ERROR - Attempting to write value for unconfigured variable 
>(CONFIG_VTAG_ICACHE)
>ERROR - Attempting to write value for unconfigured variable 
>(CONFIG_BINFMT_ELF32)
>ERROR - Attempting to write value for unconfigured variable 
>(CONFIG_SERIAL)
>ERROR - Attempting to write value for unconfigured variable 
>(CONFIG_RTC)
>
>Don't know what's wrong.
>I have configured for MIPS Malta (Experimental) board
>
>then i did # make ARCH=mips dep
>
>finally # make ARCH=mips CROSS_COMPILE=mipsel-linux-
>
>Now i get
>binfmt_elf.c: In function 'load_elf_interp':
>binfmt_elf.c:278: 'EF_MIPS_ABI2' undeclared
>binfmt_elf.c:278: 'EF_MIPS_ABI' undeclared
>make[2]:Leaving directory '/home/user/usagi/kernel/linux24/fs'
>make:***[_dir_fs]Error 2
>
>Is Usagi stable on MIPS Malta board ??
>Pls tell me what's wrong.
>
>-Santosh

Re: (usagi-users 02267) Re: Usagi kernel for MIPS target

[Juan Quintela]

>>>>> "kunitake" == KUNITAKE Koichi <kunitake@linux-ipv6.org> writes:

kunitake> I think you cant use "xconfig" on Cross-compiling env, please edit
kunitake> linux24/Makefile and use "make config". After all, please exec following
kunitake> commands.

kunitake> $ make config
kunitake> $ make dep; make clean; make zImage

I bet that a make vmlinux or make vmlinux.ecoff is better than zImage
on mips :p

Go to source.

My mips tree don't have a zImage at all :p

Later, juan.

-- 
In theory, practice and theory are the same, but in practice they 
are different -- Larry McVoy

Usagi kernel for MIPS target

[Santosh]

Hello All,

I'm interested in compiling Usagi kernel for a MIPS 32-bit 
board.
I have a set of MIPS cross-compiler tools, ex: mipsel-linux-gcc, 
etc and gcc version 2.95.3.

Can someone tell me what changes i have to make to compile the 
sources successfully for MIPS target ???

As anyone tested Usagi for MIPS target ?? Hints pls.

Thanks

-Santosh
-----------------------------------------





__________________________________________________________
Great Travel Deals, Airfares, Hotels on
http://www.journeymart.com/rediff/travel.asp

Re: (usagi-users 02263) Usagi kernel for MIPS target

[KUNITAKE Koichi]

  Hello,

On 12 Mar 2003 07:08:17 -0000
"Santosh " <ipv6_san@rediffmail.com> wrote:

>Can someone tell me what changes i have to make to compile the 
>sources successfully for MIPS target ???

  I have never compiled USAGI for MIPS target, but I think you
should edit linux24/Makefile as following.


--- Makefile.orig       2003-03-12 16:55:06.000000000 +0900
+++ Makefile    2003-03-12 16:55:32.000000000 +0900
@@ -5,7 +5,8 @@
 
 KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 
-ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
+#ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
+ARCH := mips
 KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e "s/-//g")
 
 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
@@ -19,7 +20,7 @@
 HOSTCC         = gcc
 HOSTCFLAGS     = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
 
-CROSS_COMPILE  =
+CROSS_COMPILE  = mips-linux-
 
 #
 # Include the make variables (CC, etc...)


  Did this fail?

Best regards,