* Davicom driver support in pmon
@ 2005-01-27 4:05 priya
2005-01-27 23:56 ` Ho Lee
0 siblings, 1 reply; 3+ messages in thread
From: priya @ 2005-01-27 4:05 UTC (permalink / raw)
To: linux-mips@linux-mips.org
Hi,
I have implemented a davicom driver on
the same lines as rtl driver in pmon for
a customized mips platform - but iam not
able to set the mac ID. After the init
routine the driver seem to have has
received a multicaste frame. This i
could verify by putting sufficient
prints. After this nothing happens. I
guess the mac address is also not set
properly. Has any one implemented a
davicom driver in pmon before??
thanks,
priya
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Davicom driver support in pmon
2005-01-27 4:05 Davicom driver support in pmon priya
@ 2005-01-27 23:56 ` Ho Lee
2005-01-27 23:56 ` Ho Lee
0 siblings, 1 reply; 3+ messages in thread
From: Ho Lee @ 2005-01-27 23:56 UTC (permalink / raw)
To: linux-mips
Once I did in other platform. Did you set the valid MAC address
to ID registers starting from I/O base + 0xc0?
-- Ho
----- Original Message -----
From: "priya" <priya@procsys.com>
To: <linux-mips@linux-mips.org>
Sent: Wednesday, January 26, 2005 8:05 PM
Subject: Davicom driver support in pmon
> Hi,
> I have implemented a davicom driver on
> the same lines as rtl driver in pmon for
> a customized mips platform - but iam not
> able to set the mac ID. After the init
> routine the driver seem to have has
> received a multicaste frame. This i
> could verify by putting sufficient
> prints. After this nothing happens. I
> guess the mac address is also not set
> properly. Has any one implemented a
> davicom driver in pmon before??
>
> thanks,
> priya
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Davicom driver support in pmon
2005-01-27 23:56 ` Ho Lee
@ 2005-01-27 23:56 ` Ho Lee
0 siblings, 0 replies; 3+ messages in thread
From: Ho Lee @ 2005-01-27 23:56 UTC (permalink / raw)
To: linux-mips
Once I did in other platform. Did you set the valid MAC address
to ID registers starting from I/O base + 0xc0?
-- Ho
----- Original Message -----
From: "priya" <priya@procsys.com>
To: <linux-mips@linux-mips.org>
Sent: Wednesday, January 26, 2005 8:05 PM
Subject: Davicom driver support in pmon
> Hi,
> I have implemented a davicom driver on
> the same lines as rtl driver in pmon for
> a customized mips platform - but iam not
> able to set the mac ID. After the init
> routine the driver seem to have has
> received a multicaste frame. This i
> could verify by putting sufficient
> prints. After this nothing happens. I
> guess the mac address is also not set
> properly. Has any one implemented a
> davicom driver in pmon before??
>
> thanks,
> priya
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-01-27 23:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-27 4:05 Davicom driver support in pmon priya
2005-01-27 23:56 ` Ho Lee
2005-01-27 23:56 ` Ho Lee
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox