* keep getting "exec: Permission denied" at booting
@ 2005-06-23 20:58 rolf liu
2005-06-23 21:56 ` Kevin D. Kissell
0 siblings, 1 reply; 2+ messages in thread
From: rolf liu @ 2005-06-23 20:58 UTC (permalink / raw)
To: linux-mips
I am running 2.4.31 on ab1550. When the start-up comes at the network
config, ifup tries to bring up the ethernet interface. Then there
comes tons of "exec: Permission denied" message. the box just stop
there.
I am running through the NFS root filesystem got from redhat, possibly
7.1. pretty old. Is there a newer NFS available?
Any suggestion?
thanks
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: keep getting "exec: Permission denied" at booting
2005-06-23 20:58 keep getting "exec: Permission denied" at booting rolf liu
@ 2005-06-23 21:56 ` Kevin D. Kissell
0 siblings, 0 replies; 2+ messages in thread
From: Kevin D. Kissell @ 2005-06-23 21:56 UTC (permalink / raw)
To: rolf liu; +Cc: linux-mips
rolf liu wrote:
> I am running 2.4.31 on ab1550. When the start-up comes at the network
> config, ifup tries to bring up the ethernet interface. Then there
> comes tons of "exec: Permission denied" message. the box just stop
> there.
>
> I am running through the NFS root filesystem got from redhat, possibly
> 7.1. pretty old. Is there a newer NFS available?
>
> Any suggestion?
Check the options you're using to export the NFS root on the server.
For example, I note that I've got the no_root_squash and anongid=0
options set for the MIPS Linux boot area on my Linux PC - but it's
been a couple of years since I've actually used it, and I don't recall
where that came from.
Regards,
Kevin K.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-06-23 21:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-06-23 20:58 keep getting "exec: Permission denied" at booting rolf liu
2005-06-23 21:56 ` Kevin D. Kissell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox