* IOC3 not working on SGI O2K
@ 2005-07-04 12:44 Arianna Arona
2005-07-04 12:58 ` Ralf Baechle
2005-07-04 15:37 ` Ilya A. Volynets-Evenbakh
0 siblings, 2 replies; 3+ messages in thread
From: Arianna Arona @ 2005-07-04 12:44 UTC (permalink / raw)
To: linux-mips
Hi everybody,
I have a SGI O2K, and I'm trying to install linux.
I've downloaded vmlinux.ip27-20040428 from
http://www.total-knowledge.com/progs/mips/kernels/ and it boots and mount a
local root file system.
IOC3 ethernet card doesn't work.
Here are boot logs:
[.....]
[33] 0:1 0; <6> eth%d: link down 0000000004e00791
[.....]
[63] 0:1 0; 725e700004e00791
Found DS1981U NIC registration number 07:e0:04:70:5e, CRC 72.
Ethernet address is 08:00:69:0d:16:00
eth0: link down
eth0: using PHY 0, vendor 0x2000, model 0, rev 3.
eth0: IOC3 SSRAm has 128Kbytes.
IOC3 is on a board with 2 consoles and a SCSI port.
Could be this the problem? Is there any solution?
Thank you very much,
Arianna
--
Arianna Arona
Servizi Informatici
Dipartimento di Scienze dell'Informazione
Via Comelico 39
20135 Milano
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: IOC3 not working on SGI O2K
2005-07-04 12:44 IOC3 not working on SGI O2K Arianna Arona
@ 2005-07-04 12:58 ` Ralf Baechle
2005-07-04 15:37 ` Ilya A. Volynets-Evenbakh
1 sibling, 0 replies; 3+ messages in thread
From: Ralf Baechle @ 2005-07-04 12:58 UTC (permalink / raw)
To: Arianna Arona; +Cc: linux-mips
Arianna,
On Mon, Jul 04, 2005 at 02:44:00PM +0200, Arianna Arona wrote:
> Here are boot logs:
> [.....]
> [33] 0:1 0; <6> eth%d: link down 0000000004e00791
> [.....]
> [63] 0:1 0; 725e700004e00791
> Found DS1981U NIC registration number 07:e0:04:70:5e, CRC 72.
> Ethernet address is 08:00:69:0d:16:00
> eth0: link down
> eth0: using PHY 0, vendor 0x2000, model 0, rev 3.
You need to update the kernel or at least to apply this fix:
http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-cvs-patches&i=e3d7626b64e5384ac570b0d42c3ecf3f%40NO-ID-FOUND.mhonarc.org
Ralf
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: IOC3 not working on SGI O2K
2005-07-04 12:44 IOC3 not working on SGI O2K Arianna Arona
2005-07-04 12:58 ` Ralf Baechle
@ 2005-07-04 15:37 ` Ilya A. Volynets-Evenbakh
1 sibling, 0 replies; 3+ messages in thread
From: Ilya A. Volynets-Evenbakh @ 2005-07-04 15:37 UTC (permalink / raw)
To: Arianna Arona; +Cc: linux-mips
I have uploaded my latest kernel to the website.
Try it.
Ilya.
Arianna Arona wrote:
>Hi everybody,
>
>I have a SGI O2K, and I'm trying to install linux.
>I've downloaded vmlinux.ip27-20040428 from
>http://www.total-knowledge.com/progs/mips/kernels/ and it boots and mount a
>local root file system.
>IOC3 ethernet card doesn't work.
>
>Here are boot logs:
>[.....]
>[33] 0:1 0; <6> eth%d: link down 0000000004e00791
>[.....]
>[63] 0:1 0; 725e700004e00791
>Found DS1981U NIC registration number 07:e0:04:70:5e, CRC 72.
>Ethernet address is 08:00:69:0d:16:00
>eth0: link down
>eth0: using PHY 0, vendor 0x2000, model 0, rev 3.
>eth0: IOC3 SSRAm has 128Kbytes.
>
>
>IOC3 is on a board with 2 consoles and a SCSI port.
>Could be this the problem? Is there any solution?
>
>Thank you very much,
>Arianna
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-07-04 15:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-07-04 12:44 IOC3 not working on SGI O2K Arianna Arona
2005-07-04 12:58 ` Ralf Baechle
2005-07-04 15:37 ` Ilya A. Volynets-Evenbakh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox