[PATCH] Simple patch to power off DBAU1200

[Sergei Shtylylov <sshtylyov@ru.mvista.com>]

[-- Attachment #1: Type: text/plain, Size: 962 bytes --]

Hello.

Matej Kupljen wrote:
> Hi
> 
> Please, find the attached patch which enables
> powering off the DBAU1200 board.

     As a follow up to this one, here's the patch which does the same thing for
DBAu1550 by just reusing Pb1550 code. I added #else because #if renders the
rest of the au1000_halt() code unreachable on DBAu1550/PB1550 anyway.

> BR,
> Matej

WBR, Sergei

> ------------------------------------------------------------------------
> 
> Patch to enable powering off DBAU1200
> 
> Signed-off-by: Matej Kupljen <matej.kupljen@ultra.si>
> 
> --- a/arch/mips/au1000/common/reset.c	2005-10-24 13:36:24.000000000 +0200
> +++ b/arch/mips/au1000/common/reset.c	2005-08-24 14:39:58.000000000 +0200
> @@ -175,6 +175,9 @@
>  #ifdef CONFIG_MIPS_MIRAGE
>  	au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
>  #endif
> +#ifdef CONFIG_MIPS_DB1200
> +	au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
> +#endif
>  #ifdef CONFIG_PM
>  	au_sleep();
>  




[-- Attachment #2: DBAu1550-soft-off.patch --]
[-- Type: text/plain, Size: 943 bytes --]

diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c
index 65b84db..8a4afdc 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/au1000/common/reset.c
@@ -164,13 +164,13 @@ void au1000_restart(char *command)
 
 void au1000_halt(void)
 {
-#if defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
 	/* power off system */
-	printk("\n** Powering off Pb1550\n");
+	printk("\n** Powering off...\n");
 	au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
 	au_sync();
 	while(1); /* should not get here */
-#endif
+#else
 	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
 #ifdef CONFIG_MIPS_MIRAGE
 	au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
@@ -187,6 +187,7 @@ void au1000_halt(void)
 	                "wait\n\t"
 			".set\tmips0");
 #endif
+#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
 }
 
 void au1000_power_off(void)