Re: [PATCH] Enable DBAu1550 soft-off

[Sergei Shtylylov <sshtylyov@ru.mvista.com>]

[-- Attachment #1: Type: text/plain, Size: 567 bytes --]

Hello, I wrote.

>> Matej Kupljen wrote:
>>
>>> Hi
>>>
>>> Please, find the attached patch which enables
>>> powering off the DBAU1200 board.
>>
>>
>>
>>     As a follow up to this one, here's the patch which does the same 
>> thing for
>> DBAu1550 by just reusing Pb1550 code. I added #else because #if 
>> renders the
>> rest of the au1000_halt() code unreachable on DBAu1550/PB1550 anyway.

> 
>    Failed to chenge the subject to a proper one. :-/

     And forgot about sign-off line. :-(

> WBR, Sergei

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

[-- Attachment #2: DBAu1550-soft-off.patch --]
[-- Type: text/plain, Size: 943 bytes --]

diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c
index 65b84db..8a4afdc 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/au1000/common/reset.c
@@ -164,13 +164,13 @@ void au1000_restart(char *command)
 
 void au1000_halt(void)
 {
-#if defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
 	/* power off system */
-	printk("\n** Powering off Pb1550\n");
+	printk("\n** Powering off...\n");
 	au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
 	au_sync();
 	while(1); /* should not get here */
-#endif
+#else
 	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
 #ifdef CONFIG_MIPS_MIRAGE
 	au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
@@ -187,6 +187,7 @@ void au1000_halt(void)
 	                "wait\n\t"
 			".set\tmips0");
 #endif
+#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
 }
 
 void au1000_power_off(void)