Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: linux-mips@linux-mips.org, i2c@lm-sensors.org
Subject: Re: [PATCH 8/12] drivers: PMC MSP71xx TWI driver]
Date: Tue, 20 Mar 2007 16:42:39 -0800	[thread overview]
Message-ID: <46007F7F.9030604@pmc-sierra.com> (raw)



Jean Delvare wrote:
> Marc,
> 
>  > ----- Forwarded message from Marc St-Jean <stjeanma@pmc-sierra.com> 
> -----
>  >
>  > From: Marc St-Jean <stjeanma@pmc-sierra.com>
>  > Date: Fri, 16 Mar 2007 15:39:51 -0600
>  > To:   akpm@linux-foundation.org
>  > Cc:   linux-mips@linux-mips.org
>  > Subject: [PATCH 8/12] drivers: PMC MSP71xx TWI driver
>  >
>  > [PATCH 8/12] drivers: PMC MSP71xx TWI driver
>  >
>  > Patch to add TWI driver for the PMC-Sierra MSP71xx devices.
>  >
>  > Reposting patches as a single set at the request of akpm.
>  > Only 9 of 12 will be posted at this time, 3 more to follow
>  > when cleanups are complete.
>  >
>  > CCing linux-mips.org since minor changes have occured
>  > during cleanup of driver patches for other lists.
>  >
>  > Thanks,
>  > Marc
>  >
>  > Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
>  > ---
>  > Re-posting patch with recommended changes:
>  > -No changes.
>  >
>  >  drivers/i2c/algos/Kconfig           |    9
>  >  drivers/i2c/algos/Makefile          |    1
>  >  drivers/i2c/algos/i2c-algo-pmctwi.c |  197 ++++++++++++++++
>  >  drivers/i2c/busses/Kconfig          |    7
>  >  drivers/i2c/busses/Makefile         |    1
>  >  drivers/i2c/busses/i2c-pmcmsp.c     |  419 
> ++++++++++++++++++++++++++++++++++++
>  >  include/linux/i2c-algo-pmctwi.h     |  135 +++++++++++
>  >  7 files changed, 768 insertions(+), 1 deletion(-)
> 
> Why are you making a separate algorithm driver? This should really only
> be done when the algorithm is very generic. This is the exception, not
> the rule. These days I tend to move algorithm code back into the only
> bus driver that uses them (i2c-algo-sibyte done recently, i2c-algo-sgi
> is next on my list.)

I believe it was done to separate the algorithm for the TWI sub-system,
which is used in several devices, from the device family code. If this
is no longer acceptable I will merge the algo code with the adapter.


>  > diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
>  > index af02034..794f7bb 100644
>  > --- a/drivers/i2c/algos/Kconfig
>  > +++ b/drivers/i2c/algos/Kconfig
>  > @@ -49,5 +49,12 @@ config I2C_ALGO_SGI
>  >         Supports the SGI interfaces like the ones found on SGI Indy VINO
>  >         or SGI O2 MACE.
>  > 
>  > -endmenu
>  > +config I2C_ALGO_PMCTWI
>  > +     tristate "I2C PMC TWI interfaces"
>  > +     depends on I2C && PMC_MSP
> 
> As a matter of fact, each time an algorithm depends on specific
> hardware, you can be reasonably certain that it should NOT be made a
> generic algorithm driver.

OK.

>  > +     help
>  > +       Implements the PMC TWI SoC algorithm for various 
> implementations.
>  > 
>  > +       Be sure to select the proper bus for your platform below.
>  > +
>  > +endmenu
> 
> -- 
> Jean Delvare
> 

             reply	other threads:[~2007-03-21  0:44 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-03-21  0:42 Marc St-Jean [this message]
2007-03-21 15:34 ` [PATCH 8/12] drivers: PMC MSP71xx TWI driver] Jean Delvare
  -- strict thread matches above, loose matches on Subject: below --
2007-03-16 23:03 Ralf Baechle
2007-03-17  7:52 ` Jean Delvare
2007-03-19 10:41   ` Ladislav Michl
2007-03-19 13:36     ` Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46007F7F.9030604@pmc-sierra.com \
    --to=marc_st-jean@pmc-sierra.com \
    --cc=i2c@lm-sensors.org \
    --cc=khali@linux-fr.org \
    --cc=linux-mips@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox