* [PATCH][au1x00/mtx1] - usb power switch
@ 2007-08-03 21:59 John Crispin
2007-08-04 13:58 ` Ralf Baechle
0 siblings, 1 reply; 3+ messages in thread
From: John Crispin @ 2007-08-03 21:59 UTC (permalink / raw)
To: linux-mips
the gpio of the usb power switch for the mtx-1 is not pulled high due to
wrong #ifdef
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
--- linux-2.6.23.orig/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:57:35.000000000 +0200
+++ linux-2.6.23/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:59:48.000000000 +0200
@@ -54,7 +54,7 @@
void __init board_setup(void)
{
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
// enable USB power switch
au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
au_writel( 0x100001, GPIO2_OUTPUT );
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH][au1x00/mtx1] - usb power switch
@ 2007-07-31 7:56 John Crispin
0 siblings, 0 replies; 3+ messages in thread
From: John Crispin @ 2007-07-31 7:56 UTC (permalink / raw)
To: linux-mips; +Cc: nbd, florian
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
the gpio for the usb power switch is not pulled on the mtx-1 on 2.6 kernels
--- linux-2.6.23-rc1.orig/arch/mips/au1000/mtx-1/board_setup.c
2007-07-29 18:57:35.000000000 +0200
+++ linux-2.6.23-rc1/arch/mips/au1000/mtx-1/board_setup.c
2007-07-29 18:59:48.000000000 +0200
@@ -54,7 +54,7 @@
void __init board_setup(void)
{
-#ifdef CONFIG_USB_OHCI
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
// enable USB power switch
au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
au_writel( 0x100000, GPIO2_OUTPUT );
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-08-04 13:58 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-08-03 21:59 [PATCH][au1x00/mtx1] - usb power switch John Crispin
2007-08-04 13:58 ` Ralf Baechle
-- strict thread matches above, loose matches on Subject: below --
2007-07-31 7:56 John Crispin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox