Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Florian Fainelli <florian@openwrt.org>
To: John Crispin <blogic@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>,
	linux-mips@linux-mips.org, Gabor Juhos <juhosg@openwrt.org>
Subject: Re: [PATCH] MIPS: add irqdomain support for the CPU IRQ controller
Date: Mon, 28 Jan 2013 23:12:44 +0100	[thread overview]
Message-ID: <5106F7DC.1040307@openwrt.org> (raw)
In-Reply-To: <1359410344-19737-1-git-send-email-blogic@openwrt.org>

Le 28/01/2013 22:59, John Crispin a écrit :
> From: Gabor Juhos <juhosg@openwrt.org>
>
> Adds an irqdomain wrapper for the cpu irq controller that can be passed inside
> the of_device_id to of_irq_init().
>
> A device_node inside a dts file would look as such.
>
> cpuintc: cpuintc@0 {
> 	#address-cells = <0>;
> 	#interrupt-cells = <1>;
> 	interrupt-controller;
> 	compatible = "mti,cpu-intc";
> };

Please use this as an actual device tree documentation binding.

>
> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
> Signed-off-by: John Crispin <blogic@openwrt.org>
> ---
>   arch/mips/include/asm/irq_cpu.h |    6 ++++++
>   arch/mips/kernel/irq_cpu.c      |   42 +++++++++++++++++++++++++++++++++++++++
>   2 files changed, 48 insertions(+)
>
> diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h
> index ef6a07c..3f11fdb 100644
> --- a/arch/mips/include/asm/irq_cpu.h
> +++ b/arch/mips/include/asm/irq_cpu.h
> @@ -17,4 +17,10 @@ extern void mips_cpu_irq_init(void);
>   extern void rm7k_cpu_irq_init(void);
>   extern void rm9k_cpu_irq_init(void);
>
> +#ifdef CONFIG_IRQ_DOMAIN
> +struct device_node;
> +extern int mips_cpu_intc_init(struct device_node *of_node,
> +			      struct device_node *parent);
> +#endif
> +
>   #endif /* _ASM_IRQ_CPU_H */
> diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
> index 972263b..49bc9ca 100644
> --- a/arch/mips/kernel/irq_cpu.c
> +++ b/arch/mips/kernel/irq_cpu.c
> @@ -31,6 +31,7 @@
>   #include <linux/interrupt.h>
>   #include <linux/kernel.h>
>   #include <linux/irq.h>
> +#include <linux/irqdomain.h>
>
>   #include <asm/irq_cpu.h>
>   #include <asm/mipsregs.h>
> @@ -113,3 +114,44 @@ void __init mips_cpu_irq_init(void)
>   		irq_set_chip_and_handler(i, &mips_cpu_irq_controller,
>   					 handle_percpu_irq);
>   }
> +
> +#ifdef CONFIG_IRQ_DOMAIN
> +static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq,
> +			     irq_hw_number_t hw)
> +{
> +	static struct irq_chip *chip;
> +
> +	if (hw < 2 && cpu_has_mipsmt) {
> +		/* Software interrupts are used for MT/CMT IPI */
> +		chip = &mips_mt_cpu_irq_controller;
> +	} else {
> +		chip = &mips_cpu_irq_controller;
> +	}
> +
> +	irq_set_chip_and_handler(irq, chip, handle_percpu_irq);
> +
> +	return 0;
> +}
> +
> +static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
> +	.map = mips_cpu_intc_map,
> +	.xlate = irq_domain_xlate_onecell,
> +};
> +
> +int __init mips_cpu_intc_init(struct device_node *of_node,
> +			      struct device_node *parent)
> +{
> +	struct irq_domain *domain;
> +
> +	/* Mask interrupts. */
> +	clear_c0_status(ST0_IM);
> +	clear_c0_cause(CAUSEF_IP);
> +
> +	domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
> +				       &mips_cpu_intc_irq_domain_ops, NULL);
> +	if (!domain)
> +		panic("Failed to add irqdomain for MIPS CPU\n");
> +
> +	return 0;
> +}
> +#endif /* CONFIG_IRQ_DOMAIN */
>

  reply	other threads:[~2013-01-28 22:12 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-28 21:59 [PATCH] MIPS: add irqdomain support for the CPU IRQ controller John Crispin
2013-01-28 22:12 ` Florian Fainelli [this message]
2013-01-29 17:40   ` David Daney
2013-01-29 18:32     ` John Crispin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5106F7DC.1040307@openwrt.org \
    --to=florian@openwrt.org \
    --cc=blogic@openwrt.org \
    --cc=juhosg@openwrt.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox