Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Markos Chandras <Markos.Chandras@imgtec.com>
To: Jayachandran C <jchandra@broadcom.com>
Cc: <ralf@linux-mips.org>, <linux-mips@linux-mips.org>
Subject: Re: [PATCH] MIPS: mm: Move some checks out of 'for' loop in DMA operations
Date: Wed, 25 Sep 2013 14:19:11 +0100	[thread overview]
Message-ID: <5242E2CF.8030709@imgtec.com> (raw)
In-Reply-To: <1380114065-9761-1-git-send-email-jchandra@broadcom.com>

On 09/25/13 14:01, Jayachandran C wrote:
> The check cpu_needs_post_dma_flush() in mips_dma_sync_sg_for_cpu() and
> the check !plat_device_is_coherent() in mips_dma_sync_sg_for_device()
> can be moved outside the for loop.
>
> As a side effect, this also avoids a GCC bug that caused kernel compile
> to fail with the error:
>
> arch/mips/mm/dma-default.c: In function 'mips_dma_sync_sg_for_cpu':
> arch/mips/mm/dma-default.c:316:1: internal compiler error: in add_insn_before, at emit-rtl.c:3852
>
> This gcc failure is seen in Code Sourcery toolchains [e.g. gcc version
> 4.7.2 (Sourcery CodeBench Lite 2012.09-99)] after commit "MIPS: Optimize
> current_cpu_type() for better code."
> ---
>   arch/mips/mm/dma-default.c |   12 ++++--------
>   1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
> index e45e4b0..2e94185 100644
> --- a/arch/mips/mm/dma-default.c
> +++ b/arch/mips/mm/dma-default.c
> @@ -307,12 +307,10 @@ static void mips_dma_sync_sg_for_cpu(struct device *dev,
>   {
>   	int i;
>
> -	/* Make sure that gcc doesn't leave the empty loop body.  */
> -	for (i = 0; i < nelems; i++, sg++) {
> -		if (cpu_needs_post_dma_flush(dev))
> +	if (cpu_needs_post_dma_flush(dev))
> +		for (i = 0; i < nelems; i++, sg++)
>   			__dma_sync(sg_page(sg), sg->offset, sg->length,
>   				   direction);
> -	}
>   }
>
>   static void mips_dma_sync_sg_for_device(struct device *dev,
> @@ -320,12 +318,10 @@ static void mips_dma_sync_sg_for_device(struct device *dev,
>   {
>   	int i;
>
> -	/* Make sure that gcc doesn't leave the empty loop body.  */
> -	for (i = 0; i < nelems; i++, sg++) {
> -		if (!plat_device_is_coherent(dev))
> +	if (!plat_device_is_coherent(dev))
> +		for (i = 0; i < nelems; i++, sg++)
>   			__dma_sync(sg_page(sg), sg->offset, sg->length,
>   				   direction);
> -	}
>   }
>
>   int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
>

Hi,

The patch looks good to me and it fixes the gcc problem indeed (the bug 
is also present in gcc-4.7.3  from the 2013.05 release)

Reviewed-by/Tested-by: Markos Chandras <markos.chandras@imgtec.com>

WARNING: multiple messages have this Message-ID (diff)
From: Markos Chandras <Markos.Chandras@imgtec.com>
To: Jayachandran C <jchandra@broadcom.com>
Cc: ralf@linux-mips.org, linux-mips@linux-mips.org
Subject: Re: [PATCH] MIPS: mm: Move some checks out of 'for' loop in DMA operations
Date: Wed, 25 Sep 2013 14:19:11 +0100	[thread overview]
Message-ID: <5242E2CF.8030709@imgtec.com> (raw)
Message-ID: <20130925131911.f7EP4DYxTNkXxt0v5o_phzBKoDM2C5FqREtxtXqfLeg@z> (raw)
In-Reply-To: <1380114065-9761-1-git-send-email-jchandra@broadcom.com>

On 09/25/13 14:01, Jayachandran C wrote:
> The check cpu_needs_post_dma_flush() in mips_dma_sync_sg_for_cpu() and
> the check !plat_device_is_coherent() in mips_dma_sync_sg_for_device()
> can be moved outside the for loop.
>
> As a side effect, this also avoids a GCC bug that caused kernel compile
> to fail with the error:
>
> arch/mips/mm/dma-default.c: In function 'mips_dma_sync_sg_for_cpu':
> arch/mips/mm/dma-default.c:316:1: internal compiler error: in add_insn_before, at emit-rtl.c:3852
>
> This gcc failure is seen in Code Sourcery toolchains [e.g. gcc version
> 4.7.2 (Sourcery CodeBench Lite 2012.09-99)] after commit "MIPS: Optimize
> current_cpu_type() for better code."
> ---
>   arch/mips/mm/dma-default.c |   12 ++++--------
>   1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
> index e45e4b0..2e94185 100644
> --- a/arch/mips/mm/dma-default.c
> +++ b/arch/mips/mm/dma-default.c
> @@ -307,12 +307,10 @@ static void mips_dma_sync_sg_for_cpu(struct device *dev,
>   {
>   	int i;
>
> -	/* Make sure that gcc doesn't leave the empty loop body.  */
> -	for (i = 0; i < nelems; i++, sg++) {
> -		if (cpu_needs_post_dma_flush(dev))
> +	if (cpu_needs_post_dma_flush(dev))
> +		for (i = 0; i < nelems; i++, sg++)
>   			__dma_sync(sg_page(sg), sg->offset, sg->length,
>   				   direction);
> -	}
>   }
>
>   static void mips_dma_sync_sg_for_device(struct device *dev,
> @@ -320,12 +318,10 @@ static void mips_dma_sync_sg_for_device(struct device *dev,
>   {
>   	int i;
>
> -	/* Make sure that gcc doesn't leave the empty loop body.  */
> -	for (i = 0; i < nelems; i++, sg++) {
> -		if (!plat_device_is_coherent(dev))
> +	if (!plat_device_is_coherent(dev))
> +		for (i = 0; i < nelems; i++, sg++)
>   			__dma_sync(sg_page(sg), sg->offset, sg->length,
>   				   direction);
> -	}
>   }
>
>   int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
>

Hi,

The patch looks good to me and it fixes the gcc problem indeed (the bug 
is also present in gcc-4.7.3  from the 2013.05 release)

Reviewed-by/Tested-by: Markos Chandras <markos.chandras@imgtec.com>

  reply	other threads:[~2013-09-25 13:19 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-25 13:01 [PATCH] MIPS: mm: Move some checks out of 'for' loop in DMA operations Jayachandran C
2013-09-25 13:19 ` Markos Chandras [this message]
2013-09-25 13:19   ` Markos Chandras
2013-09-26 10:36 ` Jayachandran C.
2013-09-26 14:15   ` Ralf Baechle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5242E2CF.8030709@imgtec.com \
    --to=markos.chandras@imgtec.com \
    --cc=jchandra@broadcom.com \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox