* [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 7:12 [PATCH 2/2] clocksource: Make clocksource register functions void Yijing Wang
@ 2014-01-23 7:12 ` Yijing Wang
2014-01-23 7:40 ` Hans-Christian Egtvedt
` (2 subsequent siblings)
3 siblings, 0 replies; 20+ messages in thread
From: Yijing Wang @ 2014-01-23 7:12 UTC (permalink / raw)
To: John Stultz, Thomas Gleixner
Cc: Sekhar Nori, Kevin Hilman, Russell King, David Brown,
Daniel Walker, Bryan Huntsman, Tony Lindgren, Haavard Skinnemoen,
Hans-Christian Egtvedt, Mike Frysinger, Michal Simek,
Ralf Baechle, Jonas Bonn, Benjamin Herrenschmidt, Paul Mackerras,
Jeff Dike, Richard Weinberger, Ingo Molnar, H. Peter Anvin, x86,
Daniel Lezcano, Kukjin Kim, Jim Cromie, Nicolas Ferre, Barry Song,
Tony Prisk, davinci-linux-open-source, linux-arm-kernel,
linux-arm-msm, linux-omap, uclinux-dist-devel, microblaze-uclinux,
linux-mips, linux, linuxppc-dev, user-mode-linux-devel,
user-mode-linux-user, linux-samsung-soc, linux-kernel,
Yijing Wang, Hanjun Guo
Currently, clocksource_register() and __clocksource_register_scale()
functions always return 0, it's pointless, make functions void.
And remove the dead code that check the clocksource_register_hz()
return value.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
arch/arm/mach-davinci/time.c | 5 ++---
arch/arm/mach-msm/timer.c | 4 +---
arch/arm/mach-omap2/timer.c | 8 +++-----
arch/avr32/kernel/time.c | 4 +---
arch/blackfin/kernel/time-ts.c | 6 ++----
arch/microblaze/kernel/timer.c | 3 +--
arch/mips/jz4740/time.c | 6 +-----
arch/mips/loongson/common/cs5536/cs5536_mfgpt.c | 3 ++-
arch/openrisc/kernel/time.c | 3 +--
arch/powerpc/kernel/time.c | 6 +-----
arch/um/kernel/time.c | 6 +-----
arch/x86/platform/uv/uv_time.c | 14 ++++++--------
drivers/clocksource/acpi_pm.c | 3 ++-
drivers/clocksource/cadence_ttc_timer.c | 6 +-----
drivers/clocksource/exynos_mct.c | 4 +---
drivers/clocksource/i8253.c | 3 ++-
drivers/clocksource/mmio.c | 3 ++-
drivers/clocksource/samsung_pwm_timer.c | 5 +----
drivers/clocksource/scx200_hrt.c | 3 ++-
drivers/clocksource/tcb_clksrc.c | 8 +-------
drivers/clocksource/timer-marco.c | 2 +-
drivers/clocksource/timer-prima2.c | 2 +-
drivers/clocksource/vt8500_timer.c | 4 +---
include/linux/clocksource.h | 8 ++++----
kernel/time/clocksource.c | 6 ++----
kernel/time/jiffies.c | 3 ++-
26 files changed, 45 insertions(+), 83 deletions(-)
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 56c6eb5..9536f85 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -387,9 +387,8 @@ void __init davinci_timer_init(void)
/* setup clocksource */
clocksource_davinci.name = id_to_name[clocksource_id];
- if (clocksource_register_hz(&clocksource_davinci,
- davinci_clock_tick_rate))
- printk(err, clocksource_davinci.name);
+ clocksource_register_hz(&clocksource_davinci,
+ davinci_clock_tick_rate);
setup_sched_clock(davinci_read_sched_clock, 32,
davinci_clock_tick_rate);
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 1e9c338..c96e034 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -226,9 +226,7 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
err:
writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
- res = clocksource_register_hz(cs, dgt_hz);
- if (res)
- pr_err("clocksource_register failed\n");
+ clocksource_register_hz(cs, dgt_hz);
setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz);
}
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 3ca81e0..beaf7c7 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -473,11 +473,9 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
OMAP_TIMER_NONPOSTED);
setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
- if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
- pr_err("Could not register clocksource %s\n",
- clocksource_gpt.name);
- else
- pr_info("OMAP clocksource: %s at %lu Hz\n",
+ clocksource_register_hz(&clocksource_gpt, clksrc.rate);
+
+ pr_info("OMAP clocksource: %s at %lu Hz\n",
clocksource_gpt.name, clksrc.rate);
}
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index d0f771b..51b4a66 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -134,9 +134,7 @@ void __init time_init(void)
/* figure rate for counter */
counter_hz = clk_get_rate(boot_cpu_data.clk);
- ret = clocksource_register_hz(&counter, counter_hz);
- if (ret)
- pr_debug("timer: could not register clocksource: %d\n", ret);
+ clocksource_register_hz(&counter, counter_hz);
/* setup COMPARE clockevent */
comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index cb0a484..df3bb08 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -51,8 +51,7 @@ static inline unsigned long long bfin_cs_cycles_sched_clock(void)
static int __init bfin_cs_cycles_init(void)
{
- if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
- panic("failed to register clocksource");
+ clocksource_register_hz(&bfin_cs_cycles, get_cclk());
return 0;
}
@@ -103,8 +102,7 @@ static int __init bfin_cs_gptimer0_init(void)
{
setup_gptimer0();
- if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
- panic("failed to register clocksource");
+ clocksource_register_hz(&bfin_cs_gptimer0, get_sclk());
return 0;
}
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index 3e39b10..6a2417e 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -208,8 +208,7 @@ static struct clocksource clocksource_microblaze = {
static int __init xilinx_clocksource_init(void)
{
- if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
- panic("failed to register clocksource");
+ clocksource_register_hz(&clocksource_microblaze, timer_clock_freq);
/* stop timer1 */
out_be32(timer_baseaddr + TCSR1,
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index 5e430ce..041cdff 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -105,7 +105,6 @@ static struct irqaction timer_irqaction = {
void __init plat_time_init(void)
{
- int ret;
uint32_t clk_rate;
uint16_t ctrl;
@@ -121,10 +120,7 @@ void __init plat_time_init(void)
clockevents_register_device(&jz4740_clockevent);
- ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
-
- if (ret)
- printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
+ clocksource_register_hz(&jz4740_clocksource, clk_rate);
setup_irq(JZ4740_IRQ_TCU0, &timer_irqaction);
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
index c639b9d..9fa6d99 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -208,7 +208,8 @@ int __init init_mfgpt_clocksource(void)
if (num_possible_cpus() > 1) /* MFGPT does not scale! */
return 0;
- return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
+ clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
+ return 0;
}
arch_initcall(init_mfgpt_clocksource);
diff --git a/arch/openrisc/kernel/time.c b/arch/openrisc/kernel/time.c
index 7c52e94..3f789aa 100644
--- a/arch/openrisc/kernel/time.c
+++ b/arch/openrisc/kernel/time.c
@@ -156,8 +156,7 @@ static struct clocksource openrisc_timer = {
static int __init openrisc_timer_init(void)
{
- if (clocksource_register_hz(&openrisc_timer, cpuinfo.clock_frequency))
- panic("failed to register clocksource");
+ clocksource_register_hz(&openrisc_timer, cpuinfo.clock_frequency);
/* Enable the incrementer: 'continuous' mode with interrupt disabled */
mtspr(SPR_TTMR, SPR_TTMR_CR);
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index b3b1441..27c0627 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -788,11 +788,7 @@ static void __init clocksource_init(void)
else
clock = &clocksource_timebase;
- if (clocksource_register_hz(clock, tb_ticks_per_sec)) {
- printk(KERN_ERR "clocksource: %s is already registered\n",
- clock->name);
- return;
- }
+ clocksource_register_hz(clock, tb_ticks_per_sec);
printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n",
clock->name, clock->mult, clock->shift);
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 117568d..2034b58 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -92,11 +92,7 @@ static void __init setup_itimer(void)
clockevent_delta2ns(60 * HZ, &itimer_clockevent);
itimer_clockevent.min_delta_ns =
clockevent_delta2ns(1, &itimer_clockevent);
- err = clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
- if (err) {
- printk(KERN_ERR "clocksource_register_hz returned %d\n", err);
- return;
- }
+ clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
clockevents_register_device(&itimer_clockevent);
}
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 5c86786..b963774 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -379,15 +379,13 @@ static __init int uv_rtc_setup_clock(void)
if (!is_uv_system())
return -ENODEV;
- rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
- if (rc)
- printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
- else
- printk(KERN_INFO "UV RTC clocksource registered freq %lu MHz\n",
- sn_rtc_cycles_per_second/(unsigned long)1E6);
+ clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
+
+ pr_info("UV RTC clocksource registered freq %lu MHz\n",
+ sn_rtc_cycles_per_second/(unsigned long)1E6);
- if (rc || !uv_rtc_evt_enable || x86_platform_ipi_callback)
- return rc;
+ if (!uv_rtc_evt_enable || x86_platform_ipi_callback)
+ return 0;
/* Setup and register clockevents */
rc = uv_rtc_allocate_timers();
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 6eab889..ab1dc63 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -218,8 +218,9 @@ static int __init init_acpi_pm_clocksource(void)
return -ENODEV;
}
- return clocksource_register_hz(&clocksource_acpi_pm,
+ clocksource_register_hz(&clocksource_acpi_pm,
PMTMR_TICKS_PER_SEC);
+ return 0;
}
/* We use fs_initcall because we want the PCI fixups to have run
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 63f176d..b9b56ed 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -301,11 +301,7 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
__raw_writel(CNT_CNTRL_RESET,
ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
- err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
- if (WARN_ON(err)) {
- kfree(ttccs);
- return;
- }
+ clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
sched_clock_register(ttc_sched_clock_read, 16, ttccs->ttc.freq / PRESCALE);
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 62b0de6..98649c7 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -193,9 +193,7 @@ struct clocksource mct_frc = {
static void __init exynos4_clocksource_init(void)
{
exynos4_mct_frc_start(0, 0);
-
- if (clocksource_register_hz(&mct_frc, clk_rate))
- panic("%s: can't register clocksource\n", mct_frc.name);
+ clocksource_register_hz(&mct_frc, clk_rate);
}
static void exynos4_mct_comp0_stop(void)
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 14ee3ef..9c45f0a 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -95,7 +95,8 @@ static struct clocksource i8253_cs = {
int __init clocksource_i8253_init(void)
{
- return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
+ clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
+ return 0;
}
#endif
diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
index c0e2512..6e0b530 100644
--- a/drivers/clocksource/mmio.c
+++ b/drivers/clocksource/mmio.c
@@ -69,5 +69,6 @@ int __init clocksource_mmio_init(void __iomem *base, const char *name,
cs->clksrc.mask = CLOCKSOURCE_MASK(bits);
cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
- return clocksource_register_hz(&cs->clksrc, hz);
+ clocksource_register_hz(&cs->clksrc, hz);
+ return 0;
}
diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
index 5645cfc..c59292f 100644
--- a/drivers/clocksource/samsung_pwm_timer.c
+++ b/drivers/clocksource/samsung_pwm_timer.c
@@ -340,7 +340,6 @@ static void __init samsung_clocksource_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
- int ret;
pclk = clk_get_rate(pwm.timerclk);
@@ -361,9 +360,7 @@ static void __init samsung_clocksource_init(void)
pwm.variant.bits, clock_rate);
samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits);
- ret = clocksource_register_hz(&samsung_clocksource, clock_rate);
- if (ret)
- panic("samsung_clocksource_timer: can't register clocksource\n");
+ clocksource_register_hz(&samsung_clocksource, clock_rate);
}
static void __init samsung_timer_resources(void)
diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
index 64f9e82..57bdc04 100644
--- a/drivers/clocksource/scx200_hrt.c
+++ b/drivers/clocksource/scx200_hrt.c
@@ -83,7 +83,8 @@ static int __init init_hrt_clocksource(void)
pr_info("enabling scx200 high-res timer (%s MHz +%d ppm)\n", mhz27 ? "27":"1", ppm);
- return clocksource_register_hz(&cs_hrt, freq);
+ clocksource_register_hz(&cs_hrt, freq);
+ return 0;
}
module_init(init_hrt_clocksource);
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 00fdd11..805245d 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -340,9 +340,7 @@ static int __init tcb_clksrc_init(void)
}
/* and away we go! */
- ret = clocksource_register_hz(&clksrc, divided_rate);
- if (ret)
- goto err_disable_t1;
+ clocksource_register_hz(&clksrc, divided_rate);
/* channel 2: periodic and oneshot timer support */
ret = setup_clkevents(tc, clk32k_divisor_idx);
@@ -354,10 +352,6 @@ static int __init tcb_clksrc_init(void)
err_unregister_clksrc:
clocksource_unregister(&clksrc);
-err_disable_t1:
- if (!tc->tcb_config || tc->tcb_config->counter_width != 32)
- clk_disable_unprepare(tc->clk[1]);
-
err_disable_t0:
clk_disable_unprepare(t0_clk);
diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
index 09a17d9..ae78ce0 100644
--- a/drivers/clocksource/timer-marco.c
+++ b/drivers/clocksource/timer-marco.c
@@ -283,7 +283,7 @@ static void __init sirfsoc_marco_timer_init(void)
/* Clear all interrupts */
writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
- BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+ clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE);
sirfsoc_clockevent_init();
}
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index 8a492d3..c9cc307 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -204,7 +204,7 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
- BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+ clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE);
sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index 1098ed3..13f5fa4 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -150,9 +150,7 @@ static void __init vt8500_timer_init(struct device_node *np)
writel(0xf, regbase + TIMER_STATUS_VAL);
writel(~0, regbase + TIMER_MATCH_VAL);
- if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
- pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
- __func__, clocksource.name);
+ clocksource_register_hz(&clocksource, VT8500_TIMER_HZ);
clockevent.cpumask = cpumask_of(0);
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 67301a4..5a17c5e 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -282,7 +282,7 @@ static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
}
-extern int clocksource_register(struct clocksource*);
+extern void clocksource_register(struct clocksource *);
extern int clocksource_unregister(struct clocksource*);
extern void clocksource_touch_watchdog(void);
extern struct clocksource* clocksource_get_next(void);
@@ -301,17 +301,17 @@ clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
* Don't call __clocksource_register_scale directly, use
* clocksource_register_hz/khz
*/
-extern int
+extern void
__clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
extern void
__clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
-static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
+static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
{
return __clocksource_register_scale(cs, 1, hz);
}
-static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
+static inline void clocksource_register_khz(struct clocksource *cs, u32 khz)
{
return __clocksource_register_scale(cs, 1000, khz);
}
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 9951575..686ff72 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -782,7 +782,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
* This *SHOULD NOT* be called directly! Please use the
* clocksource_register_hz() or clocksource_register_khz helper functions.
*/
-int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
+void __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
{
/* Initialize mult/shift and max_idle_ns */
@@ -794,7 +794,6 @@ int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
clocksource_enqueue_watchdog(cs);
clocksource_select();
mutex_unlock(&clocksource_mutex);
- return 0;
}
EXPORT_SYMBOL_GPL(__clocksource_register_scale);
@@ -804,7 +803,7 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
* @cs: clocksource to be registered
*
*/
-int clocksource_register(struct clocksource *cs)
+void clocksource_register(struct clocksource *cs)
{
/* calculate max adjustment for given mult/shift */
cs->maxadj = clocksource_max_adjustment(cs);
@@ -820,7 +819,6 @@ int clocksource_register(struct clocksource *cs)
clocksource_enqueue_watchdog(cs);
clocksource_select();
mutex_unlock(&clocksource_mutex);
- return 0;
}
EXPORT_SYMBOL(clocksource_register);
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 7a925ba..ae4c534 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -88,7 +88,8 @@ EXPORT_SYMBOL(jiffies);
static int __init init_jiffies_clocksource(void)
{
- return clocksource_register(&clocksource_jiffies);
+ clocksource_register(&clocksource_jiffies);
+ return 0;
}
core_initcall(init_jiffies_clocksource);
--
1.7.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 7:12 [PATCH 2/2] clocksource: Make clocksource register functions void Yijing Wang
2014-01-23 7:12 ` Yijing Wang
@ 2014-01-23 7:40 ` Hans-Christian Egtvedt
2014-01-23 7:45 ` Tony Prisk
2014-01-23 8:40 ` Daniel Lezcano
3 siblings, 0 replies; 20+ messages in thread
From: Hans-Christian Egtvedt @ 2014-01-23 7:40 UTC (permalink / raw)
To: Yijing Wang
Cc: John Stultz, Thomas Gleixner, Sekhar Nori, Kevin Hilman,
Russell King, David Brown, Daniel Walker, Bryan Huntsman,
Tony Lindgren, Haavard Skinnemoen, Mike Frysinger, Michal Simek,
Ralf Baechle, Jonas Bonn, Benjamin Herrenschmidt, Paul Mackerras,
Jeff Dike, Richard Weinberger, Ingo Molnar, H. Peter Anvin, x86,
Daniel Lezcano, Kukjin Kim, Jim Cromie, Nicolas Ferre, Barry Song,
Tony Prisk, davinci-linux-open-source, linux-arm-kernel,
linux-arm-msm, linux-omap, uclinux-dist-devel, microblaze-uclinux,
linux-mips, linux, linuxppc-dev, user-mode-linux-devel,
user-mode-linux-user, linux-samsung-soc, linux-kernel, Hanjun Guo
Around Thu 23 Jan 2014 15:12:46 +0800 or thereabout, Yijing Wang wrote:
> Currently, clocksource_register() and __clocksource_register_scale()
> functions always return 0, it's pointless, make functions void.
> And remove the dead code that check the clocksource_register_hz()
> return value.
>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
For the avr32 related change
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
> ---
> arch/arm/mach-davinci/time.c | 5 ++---
> arch/arm/mach-msm/timer.c | 4 +---
> arch/arm/mach-omap2/timer.c | 8 +++-----
> arch/avr32/kernel/time.c | 4 +---
> arch/blackfin/kernel/time-ts.c | 6 ++----
> arch/microblaze/kernel/timer.c | 3 +--
> arch/mips/jz4740/time.c | 6 +-----
> arch/mips/loongson/common/cs5536/cs5536_mfgpt.c | 3 ++-
> arch/openrisc/kernel/time.c | 3 +--
> arch/powerpc/kernel/time.c | 6 +-----
> arch/um/kernel/time.c | 6 +-----
> arch/x86/platform/uv/uv_time.c | 14 ++++++--------
> drivers/clocksource/acpi_pm.c | 3 ++-
> drivers/clocksource/cadence_ttc_timer.c | 6 +-----
> drivers/clocksource/exynos_mct.c | 4 +---
> drivers/clocksource/i8253.c | 3 ++-
> drivers/clocksource/mmio.c | 3 ++-
> drivers/clocksource/samsung_pwm_timer.c | 5 +----
> drivers/clocksource/scx200_hrt.c | 3 ++-
> drivers/clocksource/tcb_clksrc.c | 8 +-------
> drivers/clocksource/timer-marco.c | 2 +-
> drivers/clocksource/timer-prima2.c | 2 +-
> drivers/clocksource/vt8500_timer.c | 4 +---
> include/linux/clocksource.h | 8 ++++----
> kernel/time/clocksource.c | 6 ++----
> kernel/time/jiffies.c | 3 ++-
> 26 files changed, 45 insertions(+), 83 deletions(-)
<snipp diffs>
--
HcE
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 7:12 [PATCH 2/2] clocksource: Make clocksource register functions void Yijing Wang
2014-01-23 7:12 ` Yijing Wang
2014-01-23 7:40 ` Hans-Christian Egtvedt
@ 2014-01-23 7:45 ` Tony Prisk
2014-01-23 7:58 ` Geert Uytterhoeven
2014-01-23 11:40 ` David Laight
2014-01-23 8:40 ` Daniel Lezcano
3 siblings, 2 replies; 20+ messages in thread
From: Tony Prisk @ 2014-01-23 7:45 UTC (permalink / raw)
To: Yijing Wang, John Stultz, Thomas Gleixner
Cc: Sekhar Nori, Kevin Hilman, Russell King, David Brown,
Daniel Walker, Bryan Huntsman, Tony Lindgren, Haavard Skinnemoen,
Hans-Christian Egtvedt, Mike Frysinger, Michal Simek,
Ralf Baechle, Jonas Bonn, Benjamin Herrenschmidt, Paul Mackerras,
Jeff Dike, Richard Weinberger, Ingo Molnar, H. Peter Anvin, x86,
Daniel Lezcano, Kukjin Kim, Jim Cromie, Nicolas Ferre, Barry Song,
davinci-linux-open-source, linux-arm-kernel, linux-arm-msm,
linux-omap, uclinux-dist-devel, microblaze-uclinux, linux-mips,
linux, linuxppc-dev, user-mode-linux-devel, user-mode-linux-user,
linux-samsung-soc, linux-kernel, Hanjun Guo
On 23/01/14 20:12, Yijing Wang wrote:
> Currently, clocksource_register() and __clocksource_register_scale()
> functions always return 0, it's pointless, make functions void.
> And remove the dead code that check the clocksource_register_hz()
> return value.
>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
......
> diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
> index 67301a4..5a17c5e 100644
> --- a/include/linux/clocksource.h
> +++ b/include/linux/clocksource.h
> @@ -282,7 +282,7 @@ static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
> }
>
>
> -extern int clocksource_register(struct clocksource*);
> +extern void clocksource_register(struct clocksource *);
> extern int clocksource_unregister(struct clocksource*);
> extern void clocksource_touch_watchdog(void);
> extern struct clocksource* clocksource_get_next(void);
> @@ -301,17 +301,17 @@ clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
> * Don't call __clocksource_register_scale directly, use
> * clocksource_register_hz/khz
> */
> -extern int
> +extern void
> __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
> extern void
> __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
>
> -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
> +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
> {
> return __clocksource_register_scale(cs, 1, hz);
> }
This doesn't make sense - you are still returning a value on a function
declared void, and the return is now from a function that doesn't return
anything either ?!?!
Doesn't this throw a compile-time warning??
Regards
Tony Prisk
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 7:45 ` Tony Prisk
@ 2014-01-23 7:58 ` Geert Uytterhoeven
2014-01-23 7:58 ` Geert Uytterhoeven
2014-01-23 8:04 ` Tony Prisk
2014-01-23 11:40 ` David Laight
1 sibling, 2 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2014-01-23 7:58 UTC (permalink / raw)
To: Tony Prisk
Cc: Yijing Wang, John Stultz, Thomas Gleixner,
Linux MIPS Mailing List, Daniel Lezcano, Kevin Hilman,
Benjamin Herrenschmidt, linux, Sekhar Nori, Paul Mackerras,
H. Peter Anvin, Daniel Walker, Hans-Christian Egtvedt, Jonas Bonn,
Kukjin Kim, Russell King, Richard Weinberger,
the arch/x86 maintainers, Tony Lindgren, Ingo Molnar,
linux-arm-msm, David Brown, Haavard Skinnemoen, Mike Frysinger,
uml-devel, Nicolas Ferre, Jeff Dike, Barry Song,
linux-samsung-soc, uml-user, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, davinci-linux-open-source,
Michal Simek, Jim Cromie, microblaze-uclinux, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
On Thu, Jan 23, 2014 at 8:45 AM, Tony Prisk <linux@prisktech.co.nz> wrote:
>> -static inline int clocksource_register_hz(struct clocksource *cs, u32
>> hz)
>> +static inline void clocksource_register_hz(struct clocksource *cs, u32
>> hz)
>> {
>> return __clocksource_register_scale(cs, 1, hz);
>> }
>
>
> This doesn't make sense - you are still returning a value on a function
> declared void, and the return is now from a function that doesn't return
> anything either ?!?!
> Doesn't this throw a compile-time warning??
No, passing on void in functions returning void doesn't cause compiler
warnings.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 7:58 ` Geert Uytterhoeven
@ 2014-01-23 7:58 ` Geert Uytterhoeven
2014-01-23 8:04 ` Tony Prisk
1 sibling, 0 replies; 20+ messages in thread
From: Geert Uytterhoeven @ 2014-01-23 7:58 UTC (permalink / raw)
To: Tony Prisk
Cc: Yijing Wang, John Stultz, Thomas Gleixner,
Linux MIPS Mailing List, Daniel Lezcano, Kevin Hilman,
Benjamin Herrenschmidt, linux, Sekhar Nori, Paul Mackerras,
H. Peter Anvin, Daniel Walker, Hans-Christian Egtvedt, Jonas Bonn,
Kukjin Kim, Russell King, Richard Weinberger,
the arch/x86 maintainers, Tony Lindgren, Ingo Molnar,
linux-arm-msm, David Brown, Haavard Skinnemoen, Mike Frysinger,
uml-devel, Nicolas Ferre, Jeff Dike, Barry Song,
linux-samsung-soc, uml-user, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, davinci-linux-open-source,
Michal Simek, Jim Cromie, microblaze-uclinux, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
On Thu, Jan 23, 2014 at 8:45 AM, Tony Prisk <linux@prisktech.co.nz> wrote:
>> -static inline int clocksource_register_hz(struct clocksource *cs, u32
>> hz)
>> +static inline void clocksource_register_hz(struct clocksource *cs, u32
>> hz)
>> {
>> return __clocksource_register_scale(cs, 1, hz);
>> }
>
>
> This doesn't make sense - you are still returning a value on a function
> declared void, and the return is now from a function that doesn't return
> anything either ?!?!
> Doesn't this throw a compile-time warning??
No, passing on void in functions returning void doesn't cause compiler
warnings.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 7:58 ` Geert Uytterhoeven
2014-01-23 7:58 ` Geert Uytterhoeven
@ 2014-01-23 8:04 ` Tony Prisk
2014-01-23 8:04 ` Tony Prisk
2014-01-23 8:17 ` Yijing Wang
1 sibling, 2 replies; 20+ messages in thread
From: Tony Prisk @ 2014-01-23 8:04 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Yijing Wang, John Stultz, Thomas Gleixner,
Linux MIPS Mailing List, Daniel Lezcano, Kevin Hilman,
Benjamin Herrenschmidt, linux, Sekhar Nori, Paul Mackerras,
H. Peter Anvin, Daniel Walker, Hans-Christian Egtvedt, Jonas Bonn,
Kukjin Kim, Russell King, Richard Weinberger,
the arch/x86 maintainers, Tony Lindgren, Ingo Molnar,
linux-arm-msm, David Brown, Haavard Skinnemoen, Mike Frysinger,
uml-devel, Nicolas Ferre, Jeff Dike, Barry Song,
linux-samsung-soc, uml-user, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, davinci-linux-open-source,
Michal Simek, Jim Cromie, microblaze-uclinux, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
On 23/01/14 20:58, Geert Uytterhoeven wrote:
> On Thu, Jan 23, 2014 at 8:45 AM, Tony Prisk <linux@prisktech.co.nz> wrote:
>>> -static inline int clocksource_register_hz(struct clocksource *cs, u32
>>> hz)
>>> +static inline void clocksource_register_hz(struct clocksource *cs, u32
>>> hz)
>>> {
>>> return __clocksource_register_scale(cs, 1, hz);
>>> }
>>
>> This doesn't make sense - you are still returning a value on a function
>> declared void, and the return is now from a function that doesn't return
>> anything either ?!?!
>> Doesn't this throw a compile-time warning??
> No, passing on void in functions returning void doesn't cause compiler
> warnings.
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
Doesn't seem right to me (even if there is no warning) but that's
probably because I used to program in Pascal where functions with no
return were 'procedures' :)
Whether it needs to be changed or not:
For the vt8500 part -
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Regards
Tony Prisk
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 8:04 ` Tony Prisk
@ 2014-01-23 8:04 ` Tony Prisk
2014-01-23 8:17 ` Yijing Wang
1 sibling, 0 replies; 20+ messages in thread
From: Tony Prisk @ 2014-01-23 8:04 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Yijing Wang, John Stultz, Thomas Gleixner,
Linux MIPS Mailing List, Daniel Lezcano, Kevin Hilman,
Benjamin Herrenschmidt, linux, Sekhar Nori, Paul Mackerras,
H. Peter Anvin, Daniel Walker, Hans-Christian Egtvedt, Jonas Bonn,
Kukjin Kim, Russell King, Richard Weinberger,
the arch/x86 maintainers, Tony Lindgren, Ingo Molnar,
linux-arm-msm, David Brown, Haavard Skinnemoen, Mike Frysinger,
uml-devel, Nicolas Ferre, Jeff Dike, Barry Song,
linux-samsung-soc, uml-user, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, davinci-linux-open-source,
Michal Simek, Jim Cromie, microblaze-uclinux, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
On 23/01/14 20:58, Geert Uytterhoeven wrote:
> On Thu, Jan 23, 2014 at 8:45 AM, Tony Prisk <linux@prisktech.co.nz> wrote:
>>> -static inline int clocksource_register_hz(struct clocksource *cs, u32
>>> hz)
>>> +static inline void clocksource_register_hz(struct clocksource *cs, u32
>>> hz)
>>> {
>>> return __clocksource_register_scale(cs, 1, hz);
>>> }
>>
>> This doesn't make sense - you are still returning a value on a function
>> declared void, and the return is now from a function that doesn't return
>> anything either ?!?!
>> Doesn't this throw a compile-time warning??
> No, passing on void in functions returning void doesn't cause compiler
> warnings.
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
Doesn't seem right to me (even if there is no warning) but that's
probably because I used to program in Pascal where functions with no
return were 'procedures' :)
Whether it needs to be changed or not:
For the vt8500 part -
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Regards
Tony Prisk
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 8:04 ` Tony Prisk
2014-01-23 8:04 ` Tony Prisk
@ 2014-01-23 8:17 ` Yijing Wang
2014-01-23 8:17 ` Yijing Wang
1 sibling, 1 reply; 20+ messages in thread
From: Yijing Wang @ 2014-01-23 8:17 UTC (permalink / raw)
To: Tony Prisk, Geert Uytterhoeven
Cc: John Stultz, Thomas Gleixner, Linux MIPS Mailing List,
Daniel Lezcano, Kevin Hilman, Benjamin Herrenschmidt, linux,
Sekhar Nori, Paul Mackerras, H. Peter Anvin, Daniel Walker,
Hans-Christian Egtvedt, Jonas Bonn, Kukjin Kim, Russell King,
Richard Weinberger, the arch/x86 maintainers, Tony Lindgren,
Ingo Molnar, linux-arm-msm, David Brown, Haavard Skinnemoen,
Mike Frysinger, uml-devel, Nicolas Ferre, Jeff Dike, Barry Song,
linux-samsung-soc, uml-user, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, davinci-linux-open-source,
Michal Simek, Jim Cromie, microblaze-uclinux, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
On 2014/1/23 16:04, Tony Prisk wrote:
> On 23/01/14 20:58, Geert Uytterhoeven wrote:
>> On Thu, Jan 23, 2014 at 8:45 AM, Tony Prisk <linux@prisktech.co.nz> wrote:
>>>> -static inline int clocksource_register_hz(struct clocksource *cs, u32
>>>> hz)
>>>> +static inline void clocksource_register_hz(struct clocksource *cs, u32
>>>> hz)
>>>> {
>>>> return __clocksource_register_scale(cs, 1, hz);
>>>> }
>>>
>>> This doesn't make sense - you are still returning a value on a function
>>> declared void, and the return is now from a function that doesn't return
>>> anything either ?!?!
>>> Doesn't this throw a compile-time warning??
>> No, passing on void in functions returning void doesn't cause compiler
>> warnings.
>>
>> Gr{oetje,eeting}s,
>>
>> Geert
>>
>> --
>> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>>
>> In personal conversations with technical people, I call myself a hacker. But
>> when I'm talking to journalists I just say "programmer" or something like that.
>> -- Linus Torvalds
> Doesn't seem right to me (even if there is no warning) but that's probably because I used to program in Pascal where functions with no return were 'procedures' :)
> Whether it needs to be changed or not:
>
> For the vt8500 part -
> Acked-by: Tony Prisk <linux@prisktech.co.nz>
Thanks!
>
> Regards
> Tony Prisk
>
>
> .
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 8:17 ` Yijing Wang
@ 2014-01-23 8:17 ` Yijing Wang
0 siblings, 0 replies; 20+ messages in thread
From: Yijing Wang @ 2014-01-23 8:17 UTC (permalink / raw)
To: Tony Prisk, Geert Uytterhoeven
Cc: John Stultz, Thomas Gleixner, Linux MIPS Mailing List,
Daniel Lezcano, Kevin Hilman, Benjamin Herrenschmidt, linux,
Sekhar Nori, Paul Mackerras, H. Peter Anvin, Daniel Walker,
Hans-Christian Egtvedt, Jonas Bonn, Kukjin Kim, Russell King,
Richard Weinberger, the arch/x86 maintainers, Tony Lindgren,
Ingo Molnar, linux-arm-msm, David Brown, Haavard Skinnemoen,
Mike Frysinger, uml-devel, Nicolas Ferre, Jeff Dike, Barry Song,
linux-samsung-soc, uml-user, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, davinci-linux-open-source,
Michal Simek, Jim Cromie, microblaze-uclinux, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
On 2014/1/23 16:04, Tony Prisk wrote:
> On 23/01/14 20:58, Geert Uytterhoeven wrote:
>> On Thu, Jan 23, 2014 at 8:45 AM, Tony Prisk <linux@prisktech.co.nz> wrote:
>>>> -static inline int clocksource_register_hz(struct clocksource *cs, u32
>>>> hz)
>>>> +static inline void clocksource_register_hz(struct clocksource *cs, u32
>>>> hz)
>>>> {
>>>> return __clocksource_register_scale(cs, 1, hz);
>>>> }
>>>
>>> This doesn't make sense - you are still returning a value on a function
>>> declared void, and the return is now from a function that doesn't return
>>> anything either ?!?!
>>> Doesn't this throw a compile-time warning??
>> No, passing on void in functions returning void doesn't cause compiler
>> warnings.
>>
>> Gr{oetje,eeting}s,
>>
>> Geert
>>
>> --
>> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>>
>> In personal conversations with technical people, I call myself a hacker. But
>> when I'm talking to journalists I just say "programmer" or something like that.
>> -- Linus Torvalds
> Doesn't seem right to me (even if there is no warning) but that's probably because I used to program in Pascal where functions with no return were 'procedures' :)
> Whether it needs to be changed or not:
>
> For the vt8500 part -
> Acked-by: Tony Prisk <linux@prisktech.co.nz>
Thanks!
>
> Regards
> Tony Prisk
>
>
> .
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 20+ messages in thread
* RE: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 7:45 ` Tony Prisk
2014-01-23 7:58 ` Geert Uytterhoeven
@ 2014-01-23 11:40 ` David Laight
2014-01-23 11:40 ` David Laight
2014-02-05 20:40 ` Thomas Gleixner
1 sibling, 2 replies; 20+ messages in thread
From: David Laight @ 2014-01-23 11:40 UTC (permalink / raw)
To: 'Tony Prisk', Yijing Wang, John Stultz, Thomas Gleixner
Cc: linux-mips@linux-mips.org, Daniel Lezcano, Kevin Hilman,
linux@lists.openrisc.net, Sekhar Nori, Paul Mackerras,
H. Peter Anvin, Daniel Walker, Hans-Christian Egtvedt, Jonas Bonn,
Kukjin Kim, Russell King, Richard Weinberger, x86@kernel.org,
Tony Lindgren, Ingo Molnar, linux-arm-msm@vger.kernel.org,
David Brown, Haavard Skinnemoen, Mike Frysinger,
user-mode-linux-devel@lists.sourceforge.net, Nicolas Ferre,
Jeff Dike, Barry Song, linux-samsung-soc@vger.kernel.org,
user-mode-linux-user@lists.sourceforge.net,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
davinci-linux-open-source@linux.davincidsp.com, Michal Simek,
Jim Cromie, microblaze-uclinux@itee.uq.edu.au, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
From: Linuxppc-dev Tony Prisk
> On 23/01/14 20:12, Yijing Wang wrote:
> > Currently, clocksource_register() and __clocksource_register_scale()
> > functions always return 0, it's pointless, make functions void.
> > And remove the dead code that check the clocksource_register_hz()
> > return value.
> ......
> > -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
> > +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
> > {
> > return __clocksource_register_scale(cs, 1, hz);
> > }
>
> This doesn't make sense - you are still returning a value on a function
> declared void, and the return is now from a function that doesn't return
> anything either ?!?!
> Doesn't this throw a compile-time warning??
It depends on the compiler.
Recent gcc allow it.
I don't know if it is actually valid C though.
There is no excuse for it on lines like the above though.
David
^ permalink raw reply [flat|nested] 20+ messages in thread* RE: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 11:40 ` David Laight
@ 2014-01-23 11:40 ` David Laight
2014-02-05 20:40 ` Thomas Gleixner
1 sibling, 0 replies; 20+ messages in thread
From: David Laight @ 2014-01-23 11:40 UTC (permalink / raw)
To: 'Tony Prisk', Yijing Wang, John Stultz, Thomas Gleixner
Cc: linux-mips@linux-mips.org, Daniel Lezcano, Kevin Hilman,
linux@lists.openrisc.net, Sekhar Nori, Paul Mackerras,
H. Peter Anvin, Daniel Walker, Hans-Christian Egtvedt, Jonas Bonn,
Kukjin Kim, Russell King, Richard Weinberger, x86@kernel.org,
Tony Lindgren, Ingo Molnar, linux-arm-msm@vger.kernel.org,
David Brown, Haavard Skinnemoen, Mike Frysinger,
user-mode-linux-devel@lists.sourceforge.net, Nicolas Ferre,
Jeff Dike, Barry Song, linux-samsung-soc@vger.kernel.org,
user-mode-linux-user@lists.sourceforge.net,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
davinci-linux-open-source@linux.davincidsp.com, Michal Simek,
Jim Cromie, microblaze-uclinux@itee.uq.edu.au, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
From: Linuxppc-dev Tony Prisk
> On 23/01/14 20:12, Yijing Wang wrote:
> > Currently, clocksource_register() and __clocksource_register_scale()
> > functions always return 0, it's pointless, make functions void.
> > And remove the dead code that check the clocksource_register_hz()
> > return value.
> ......
> > -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
> > +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
> > {
> > return __clocksource_register_scale(cs, 1, hz);
> > }
>
> This doesn't make sense - you are still returning a value on a function
> declared void, and the return is now from a function that doesn't return
> anything either ?!?!
> Doesn't this throw a compile-time warning??
It depends on the compiler.
Recent gcc allow it.
I don't know if it is actually valid C though.
There is no excuse for it on lines like the above though.
David
^ permalink raw reply [flat|nested] 20+ messages in thread* RE: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 11:40 ` David Laight
2014-01-23 11:40 ` David Laight
@ 2014-02-05 20:40 ` Thomas Gleixner
2014-02-05 20:40 ` Thomas Gleixner
2014-02-10 1:13 ` Yijing Wang
1 sibling, 2 replies; 20+ messages in thread
From: Thomas Gleixner @ 2014-02-05 20:40 UTC (permalink / raw)
To: David Laight
Cc: 'Tony Prisk', Yijing Wang, John Stultz,
linux-mips@linux-mips.org, Daniel Lezcano, Kevin Hilman,
linux@lists.openrisc.net, Sekhar Nori, Paul Mackerras,
H. Peter Anvin, Daniel Walker, Hans-Christian Egtvedt, Jonas Bonn,
Kukjin Kim, Russell King, Richard Weinberger, x86@kernel.org,
Tony Lindgren, Ingo Molnar, linux-arm-msm@vger.kernel.org,
David Brown, Haavard Skinnemoen, Mike Frysinger,
user-mode-linux-devel@lists.sourceforge.net, Nicolas Ferre,
Jeff Dike, Barry Song, linux-samsung-soc@vger.kernel.org,
user-mode-linux-user@lists.sourceforge.net,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
davinci-linux-open-source@linux.davincidsp.com, Michal Simek,
Jim Cromie, microblaze-uclinux@itee.uq.edu.au, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
Yijing,
On Thu, 23 Jan 2014, David Laight wrote:
> From: Linuxppc-dev Tony Prisk
> > On 23/01/14 20:12, Yijing Wang wrote:
> > > Currently, clocksource_register() and __clocksource_register_scale()
> > > functions always return 0, it's pointless, make functions void.
> > > And remove the dead code that check the clocksource_register_hz()
> > > return value.
> > ......
> > > -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
> > > +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
> > > {
> > > return __clocksource_register_scale(cs, 1, hz);
> > > }
> >
> > This doesn't make sense - you are still returning a value on a function
> > declared void, and the return is now from a function that doesn't return
> > anything either ?!?!
> > Doesn't this throw a compile-time warning??
>
> It depends on the compiler.
> Recent gcc allow it.
> I don't know if it is actually valid C though.
>
> There is no excuse for it on lines like the above though.
Can you please resend with that fixed against 3.14-rc1 ?
Thanks,
tglx
^ permalink raw reply [flat|nested] 20+ messages in thread* RE: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-02-05 20:40 ` Thomas Gleixner
@ 2014-02-05 20:40 ` Thomas Gleixner
2014-02-10 1:13 ` Yijing Wang
1 sibling, 0 replies; 20+ messages in thread
From: Thomas Gleixner @ 2014-02-05 20:40 UTC (permalink / raw)
To: David Laight
Cc: 'Tony Prisk', Yijing Wang, John Stultz,
linux-mips@linux-mips.org, Daniel Lezcano, Kevin Hilman,
linux@lists.openrisc.net, Sekhar Nori, Paul Mackerras,
H. Peter Anvin, Daniel Walker, Hans-Christian Egtvedt, Jonas Bonn,
Kukjin Kim, Russell King, Richard Weinberger, x86@kernel.org,
Tony Lindgren, Ingo Molnar, linux-arm-msm@vger.kernel.org,
David Brown, Haavard Skinnemoen, Mike Frysinger,
user-mode-linux-devel@lists.sourceforge.net, Nicolas Ferre,
Jeff Dike, Barry Song, linux-samsung-soc@vger.kernel.org,
user-mode-linux-user@lists.sourceforge.net,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
davinci-linux-open-source@linux.davincidsp.com, Michal Simek,
Jim Cromie, microblaze-uclinux@itee.uq.edu.au, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
Yijing,
On Thu, 23 Jan 2014, David Laight wrote:
> From: Linuxppc-dev Tony Prisk
> > On 23/01/14 20:12, Yijing Wang wrote:
> > > Currently, clocksource_register() and __clocksource_register_scale()
> > > functions always return 0, it's pointless, make functions void.
> > > And remove the dead code that check the clocksource_register_hz()
> > > return value.
> > ......
> > > -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
> > > +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
> > > {
> > > return __clocksource_register_scale(cs, 1, hz);
> > > }
> >
> > This doesn't make sense - you are still returning a value on a function
> > declared void, and the return is now from a function that doesn't return
> > anything either ?!?!
> > Doesn't this throw a compile-time warning??
>
> It depends on the compiler.
> Recent gcc allow it.
> I don't know if it is actually valid C though.
>
> There is no excuse for it on lines like the above though.
Can you please resend with that fixed against 3.14-rc1 ?
Thanks,
tglx
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-02-05 20:40 ` Thomas Gleixner
2014-02-05 20:40 ` Thomas Gleixner
@ 2014-02-10 1:13 ` Yijing Wang
2014-02-10 1:13 ` Yijing Wang
1 sibling, 1 reply; 20+ messages in thread
From: Yijing Wang @ 2014-02-10 1:13 UTC (permalink / raw)
To: Thomas Gleixner, David Laight
Cc: 'Tony Prisk', John Stultz, linux-mips@linux-mips.org,
Daniel Lezcano, Kevin Hilman, linux@lists.openrisc.net,
Sekhar Nori, Paul Mackerras, H. Peter Anvin, Daniel Walker,
Hans-Christian Egtvedt, Jonas Bonn, Kukjin Kim, Russell King,
Richard Weinberger, x86@kernel.org, Tony Lindgren, Ingo Molnar,
linux-arm-msm@vger.kernel.org, David Brown, Haavard Skinnemoen,
Mike Frysinger, user-mode-linux-devel@lists.sourceforge.net,
Nicolas Ferre, Jeff Dike, Barry Song,
linux-samsung-soc@vger.kernel.org,
user-mode-linux-user@lists.sourceforge.net,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
davinci-linux-open-source@linux.davincidsp.com, Michal Simek,
Jim Cromie, microblaze-uclinux@itee.uq.edu.au, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
On 2014/2/6 4:40, Thomas Gleixner wrote:
> Yijing,
>
> On Thu, 23 Jan 2014, David Laight wrote:
>
>> From: Linuxppc-dev Tony Prisk
>>> On 23/01/14 20:12, Yijing Wang wrote:
>>>> Currently, clocksource_register() and __clocksource_register_scale()
>>>> functions always return 0, it's pointless, make functions void.
>>>> And remove the dead code that check the clocksource_register_hz()
>>>> return value.
>>> ......
>>>> -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
>>>> +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
>>>> {
>>>> return __clocksource_register_scale(cs, 1, hz);
>>>> }
>>>
>>> This doesn't make sense - you are still returning a value on a function
>>> declared void, and the return is now from a function that doesn't return
>>> anything either ?!?!
>>> Doesn't this throw a compile-time warning??
>>
>> It depends on the compiler.
>> Recent gcc allow it.
>> I don't know if it is actually valid C though.
>>
>> There is no excuse for it on lines like the above though.
>
> Can you please resend with that fixed against 3.14-rc1 ?
OK, I will resend later.
Thanks!
Yijing.
>
> .
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-02-10 1:13 ` Yijing Wang
@ 2014-02-10 1:13 ` Yijing Wang
0 siblings, 0 replies; 20+ messages in thread
From: Yijing Wang @ 2014-02-10 1:13 UTC (permalink / raw)
To: Thomas Gleixner, David Laight
Cc: 'Tony Prisk', John Stultz, linux-mips@linux-mips.org,
Daniel Lezcano, Kevin Hilman, linux@lists.openrisc.net,
Sekhar Nori, Paul Mackerras, H. Peter Anvin, Daniel Walker,
Hans-Christian Egtvedt, Jonas Bonn, Kukjin Kim, Russell King,
Richard Weinberger, x86@kernel.org, Tony Lindgren, Ingo Molnar,
linux-arm-msm@vger.kernel.org, David Brown, Haavard Skinnemoen,
Mike Frysinger, user-mode-linux-devel@lists.sourceforge.net,
Nicolas Ferre, Jeff Dike, Barry Song,
linux-samsung-soc@vger.kernel.org,
user-mode-linux-user@lists.sourceforge.net,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
davinci-linux-open-source@linux.davincidsp.com, Michal Simek,
Jim Cromie, microblaze-uclinux@itee.uq.edu.au, Hanjun Guo,
linux-kernel@vger.kernel.org, Ralf Baechle, Bryan Huntsman,
uclinux-dist-devel@blackfin.uclinux.org,
linuxppc-dev@lists.ozlabs.org
On 2014/2/6 4:40, Thomas Gleixner wrote:
> Yijing,
>
> On Thu, 23 Jan 2014, David Laight wrote:
>
>> From: Linuxppc-dev Tony Prisk
>>> On 23/01/14 20:12, Yijing Wang wrote:
>>>> Currently, clocksource_register() and __clocksource_register_scale()
>>>> functions always return 0, it's pointless, make functions void.
>>>> And remove the dead code that check the clocksource_register_hz()
>>>> return value.
>>> ......
>>>> -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
>>>> +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
>>>> {
>>>> return __clocksource_register_scale(cs, 1, hz);
>>>> }
>>>
>>> This doesn't make sense - you are still returning a value on a function
>>> declared void, and the return is now from a function that doesn't return
>>> anything either ?!?!
>>> Doesn't this throw a compile-time warning??
>>
>> It depends on the compiler.
>> Recent gcc allow it.
>> I don't know if it is actually valid C though.
>>
>> There is no excuse for it on lines like the above though.
>
> Can you please resend with that fixed against 3.14-rc1 ?
OK, I will resend later.
Thanks!
Yijing.
>
> .
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 7:12 [PATCH 2/2] clocksource: Make clocksource register functions void Yijing Wang
` (2 preceding siblings ...)
2014-01-23 7:45 ` Tony Prisk
@ 2014-01-23 8:40 ` Daniel Lezcano
2014-01-23 9:01 ` Yijing Wang
2014-02-05 20:39 ` Thomas Gleixner
3 siblings, 2 replies; 20+ messages in thread
From: Daniel Lezcano @ 2014-01-23 8:40 UTC (permalink / raw)
To: Yijing Wang, John Stultz, Thomas Gleixner
Cc: Sekhar Nori, Kevin Hilman, Russell King, David Brown,
Daniel Walker, Bryan Huntsman, Tony Lindgren, Haavard Skinnemoen,
Hans-Christian Egtvedt, Mike Frysinger, Michal Simek,
Ralf Baechle, Jonas Bonn, Benjamin Herrenschmidt, Paul Mackerras,
Jeff Dike, Richard Weinberger, Ingo Molnar, H. Peter Anvin, x86,
Kukjin Kim, Jim Cromie, Nicolas Ferre, Barry Song, Tony Prisk,
davinci-linux-open-source, linux-arm-kernel, linux-arm-msm,
linux-omap, uclinux-dist-devel, microblaze-uclinux, linux-mips,
linux, linuxppc-dev, user-mode-linux-devel, user-mode-linux-user,
linux-samsung-soc, linux-kernel, Hanjun Guo
On 01/23/2014 08:12 AM, Yijing Wang wrote:
> Currently, clocksource_register() and __clocksource_register_scale()
> functions always return 0, it's pointless, make functions void.
> And remove the dead code that check the clocksource_register_hz()
> return value.
>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Well, do we really want to change all these files to not take care of a
return value ? What about is we have to check it again later ?
I would recommend to investigate __clocksource_register_scale and the
underneath functions if there is not an error to be returned in the call
stack somewhere which is ignored today.
The same applies for clocksource_register.
Thanks
-- Daniel
> ---
> arch/arm/mach-davinci/time.c | 5 ++---
> arch/arm/mach-msm/timer.c | 4 +---
> arch/arm/mach-omap2/timer.c | 8 +++-----
> arch/avr32/kernel/time.c | 4 +---
> arch/blackfin/kernel/time-ts.c | 6 ++----
> arch/microblaze/kernel/timer.c | 3 +--
> arch/mips/jz4740/time.c | 6 +-----
> arch/mips/loongson/common/cs5536/cs5536_mfgpt.c | 3 ++-
> arch/openrisc/kernel/time.c | 3 +--
> arch/powerpc/kernel/time.c | 6 +-----
> arch/um/kernel/time.c | 6 +-----
> arch/x86/platform/uv/uv_time.c | 14 ++++++--------
> drivers/clocksource/acpi_pm.c | 3 ++-
> drivers/clocksource/cadence_ttc_timer.c | 6 +-----
> drivers/clocksource/exynos_mct.c | 4 +---
> drivers/clocksource/i8253.c | 3 ++-
> drivers/clocksource/mmio.c | 3 ++-
> drivers/clocksource/samsung_pwm_timer.c | 5 +----
> drivers/clocksource/scx200_hrt.c | 3 ++-
> drivers/clocksource/tcb_clksrc.c | 8 +-------
> drivers/clocksource/timer-marco.c | 2 +-
> drivers/clocksource/timer-prima2.c | 2 +-
> drivers/clocksource/vt8500_timer.c | 4 +---
> include/linux/clocksource.h | 8 ++++----
> kernel/time/clocksource.c | 6 ++----
> kernel/time/jiffies.c | 3 ++-
> 26 files changed, 45 insertions(+), 83 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
> index 56c6eb5..9536f85 100644
> --- a/arch/arm/mach-davinci/time.c
> +++ b/arch/arm/mach-davinci/time.c
> @@ -387,9 +387,8 @@ void __init davinci_timer_init(void)
>
> /* setup clocksource */
> clocksource_davinci.name = id_to_name[clocksource_id];
> - if (clocksource_register_hz(&clocksource_davinci,
> - davinci_clock_tick_rate))
> - printk(err, clocksource_davinci.name);
> + clocksource_register_hz(&clocksource_davinci,
> + davinci_clock_tick_rate);
>
> setup_sched_clock(davinci_read_sched_clock, 32,
> davinci_clock_tick_rate);
> diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
> index 1e9c338..c96e034 100644
> --- a/arch/arm/mach-msm/timer.c
> +++ b/arch/arm/mach-msm/timer.c
> @@ -226,9 +226,7 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
>
> err:
> writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
> - res = clocksource_register_hz(cs, dgt_hz);
> - if (res)
> - pr_err("clocksource_register failed\n");
> + clocksource_register_hz(cs, dgt_hz);
> setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz);
> }
>
> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
> index 3ca81e0..beaf7c7 100644
> --- a/arch/arm/mach-omap2/timer.c
> +++ b/arch/arm/mach-omap2/timer.c
> @@ -473,11 +473,9 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
> OMAP_TIMER_NONPOSTED);
> setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
>
> - if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
> - pr_err("Could not register clocksource %s\n",
> - clocksource_gpt.name);
> - else
> - pr_info("OMAP clocksource: %s at %lu Hz\n",
> + clocksource_register_hz(&clocksource_gpt, clksrc.rate);
> +
> + pr_info("OMAP clocksource: %s at %lu Hz\n",
> clocksource_gpt.name, clksrc.rate);
> }
>
> diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
> index d0f771b..51b4a66 100644
> --- a/arch/avr32/kernel/time.c
> +++ b/arch/avr32/kernel/time.c
> @@ -134,9 +134,7 @@ void __init time_init(void)
>
> /* figure rate for counter */
> counter_hz = clk_get_rate(boot_cpu_data.clk);
> - ret = clocksource_register_hz(&counter, counter_hz);
> - if (ret)
> - pr_debug("timer: could not register clocksource: %d\n", ret);
> + clocksource_register_hz(&counter, counter_hz);
>
> /* setup COMPARE clockevent */
> comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
> diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
> index cb0a484..df3bb08 100644
> --- a/arch/blackfin/kernel/time-ts.c
> +++ b/arch/blackfin/kernel/time-ts.c
> @@ -51,8 +51,7 @@ static inline unsigned long long bfin_cs_cycles_sched_clock(void)
>
> static int __init bfin_cs_cycles_init(void)
> {
> - if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
> - panic("failed to register clocksource");
> + clocksource_register_hz(&bfin_cs_cycles, get_cclk());
>
> return 0;
> }
> @@ -103,8 +102,7 @@ static int __init bfin_cs_gptimer0_init(void)
> {
> setup_gptimer0();
>
> - if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
> - panic("failed to register clocksource");
> + clocksource_register_hz(&bfin_cs_gptimer0, get_sclk());
>
> return 0;
> }
> diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
> index 3e39b10..6a2417e 100644
> --- a/arch/microblaze/kernel/timer.c
> +++ b/arch/microblaze/kernel/timer.c
> @@ -208,8 +208,7 @@ static struct clocksource clocksource_microblaze = {
>
> static int __init xilinx_clocksource_init(void)
> {
> - if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
> - panic("failed to register clocksource");
> + clocksource_register_hz(&clocksource_microblaze, timer_clock_freq);
>
> /* stop timer1 */
> out_be32(timer_baseaddr + TCSR1,
> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> index 5e430ce..041cdff 100644
> --- a/arch/mips/jz4740/time.c
> +++ b/arch/mips/jz4740/time.c
> @@ -105,7 +105,6 @@ static struct irqaction timer_irqaction = {
>
> void __init plat_time_init(void)
> {
> - int ret;
> uint32_t clk_rate;
> uint16_t ctrl;
>
> @@ -121,10 +120,7 @@ void __init plat_time_init(void)
>
> clockevents_register_device(&jz4740_clockevent);
>
> - ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
> -
> - if (ret)
> - printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
> + clocksource_register_hz(&jz4740_clocksource, clk_rate);
>
> setup_irq(JZ4740_IRQ_TCU0, &timer_irqaction);
>
> diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
> index c639b9d..9fa6d99 100644
> --- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
> +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
> @@ -208,7 +208,8 @@ int __init init_mfgpt_clocksource(void)
> if (num_possible_cpus() > 1) /* MFGPT does not scale! */
> return 0;
>
> - return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
> + clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
> + return 0;
> }
>
> arch_initcall(init_mfgpt_clocksource);
> diff --git a/arch/openrisc/kernel/time.c b/arch/openrisc/kernel/time.c
> index 7c52e94..3f789aa 100644
> --- a/arch/openrisc/kernel/time.c
> +++ b/arch/openrisc/kernel/time.c
> @@ -156,8 +156,7 @@ static struct clocksource openrisc_timer = {
>
> static int __init openrisc_timer_init(void)
> {
> - if (clocksource_register_hz(&openrisc_timer, cpuinfo.clock_frequency))
> - panic("failed to register clocksource");
> + clocksource_register_hz(&openrisc_timer, cpuinfo.clock_frequency);
>
> /* Enable the incrementer: 'continuous' mode with interrupt disabled */
> mtspr(SPR_TTMR, SPR_TTMR_CR);
> diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
> index b3b1441..27c0627 100644
> --- a/arch/powerpc/kernel/time.c
> +++ b/arch/powerpc/kernel/time.c
> @@ -788,11 +788,7 @@ static void __init clocksource_init(void)
> else
> clock = &clocksource_timebase;
>
> - if (clocksource_register_hz(clock, tb_ticks_per_sec)) {
> - printk(KERN_ERR "clocksource: %s is already registered\n",
> - clock->name);
> - return;
> - }
> + clocksource_register_hz(clock, tb_ticks_per_sec);
>
> printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n",
> clock->name, clock->mult, clock->shift);
> diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
> index 117568d..2034b58 100644
> --- a/arch/um/kernel/time.c
> +++ b/arch/um/kernel/time.c
> @@ -92,11 +92,7 @@ static void __init setup_itimer(void)
> clockevent_delta2ns(60 * HZ, &itimer_clockevent);
> itimer_clockevent.min_delta_ns =
> clockevent_delta2ns(1, &itimer_clockevent);
> - err = clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
> - if (err) {
> - printk(KERN_ERR "clocksource_register_hz returned %d\n", err);
> - return;
> - }
> + clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
> clockevents_register_device(&itimer_clockevent);
> }
>
> diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
> index 5c86786..b963774 100644
> --- a/arch/x86/platform/uv/uv_time.c
> +++ b/arch/x86/platform/uv/uv_time.c
> @@ -379,15 +379,13 @@ static __init int uv_rtc_setup_clock(void)
> if (!is_uv_system())
> return -ENODEV;
>
> - rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
> - if (rc)
> - printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
> - else
> - printk(KERN_INFO "UV RTC clocksource registered freq %lu MHz\n",
> - sn_rtc_cycles_per_second/(unsigned long)1E6);
> + clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
> +
> + pr_info("UV RTC clocksource registered freq %lu MHz\n",
> + sn_rtc_cycles_per_second/(unsigned long)1E6);
>
> - if (rc || !uv_rtc_evt_enable || x86_platform_ipi_callback)
> - return rc;
> + if (!uv_rtc_evt_enable || x86_platform_ipi_callback)
> + return 0;
>
> /* Setup and register clockevents */
> rc = uv_rtc_allocate_timers();
> diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
> index 6eab889..ab1dc63 100644
> --- a/drivers/clocksource/acpi_pm.c
> +++ b/drivers/clocksource/acpi_pm.c
> @@ -218,8 +218,9 @@ static int __init init_acpi_pm_clocksource(void)
> return -ENODEV;
> }
>
> - return clocksource_register_hz(&clocksource_acpi_pm,
> + clocksource_register_hz(&clocksource_acpi_pm,
> PMTMR_TICKS_PER_SEC);
> + return 0;
> }
>
> /* We use fs_initcall because we want the PCI fixups to have run
> diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
> index 63f176d..b9b56ed 100644
> --- a/drivers/clocksource/cadence_ttc_timer.c
> +++ b/drivers/clocksource/cadence_ttc_timer.c
> @@ -301,11 +301,7 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
> __raw_writel(CNT_CNTRL_RESET,
> ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
>
> - err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
> - if (WARN_ON(err)) {
> - kfree(ttccs);
> - return;
> - }
> + clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
>
> ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
> sched_clock_register(ttc_sched_clock_read, 16, ttccs->ttc.freq / PRESCALE);
> diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
> index 62b0de6..98649c7 100644
> --- a/drivers/clocksource/exynos_mct.c
> +++ b/drivers/clocksource/exynos_mct.c
> @@ -193,9 +193,7 @@ struct clocksource mct_frc = {
> static void __init exynos4_clocksource_init(void)
> {
> exynos4_mct_frc_start(0, 0);
> -
> - if (clocksource_register_hz(&mct_frc, clk_rate))
> - panic("%s: can't register clocksource\n", mct_frc.name);
> + clocksource_register_hz(&mct_frc, clk_rate);
> }
>
> static void exynos4_mct_comp0_stop(void)
> diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
> index 14ee3ef..9c45f0a 100644
> --- a/drivers/clocksource/i8253.c
> +++ b/drivers/clocksource/i8253.c
> @@ -95,7 +95,8 @@ static struct clocksource i8253_cs = {
>
> int __init clocksource_i8253_init(void)
> {
> - return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
> + clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
> + return 0;
> }
> #endif
>
> diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
> index c0e2512..6e0b530 100644
> --- a/drivers/clocksource/mmio.c
> +++ b/drivers/clocksource/mmio.c
> @@ -69,5 +69,6 @@ int __init clocksource_mmio_init(void __iomem *base, const char *name,
> cs->clksrc.mask = CLOCKSOURCE_MASK(bits);
> cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
>
> - return clocksource_register_hz(&cs->clksrc, hz);
> + clocksource_register_hz(&cs->clksrc, hz);
> + return 0;
> }
> diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
> index 5645cfc..c59292f 100644
> --- a/drivers/clocksource/samsung_pwm_timer.c
> +++ b/drivers/clocksource/samsung_pwm_timer.c
> @@ -340,7 +340,6 @@ static void __init samsung_clocksource_init(void)
> {
> unsigned long pclk;
> unsigned long clock_rate;
> - int ret;
>
> pclk = clk_get_rate(pwm.timerclk);
>
> @@ -361,9 +360,7 @@ static void __init samsung_clocksource_init(void)
> pwm.variant.bits, clock_rate);
>
> samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits);
> - ret = clocksource_register_hz(&samsung_clocksource, clock_rate);
> - if (ret)
> - panic("samsung_clocksource_timer: can't register clocksource\n");
> + clocksource_register_hz(&samsung_clocksource, clock_rate);
> }
>
> static void __init samsung_timer_resources(void)
> diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
> index 64f9e82..57bdc04 100644
> --- a/drivers/clocksource/scx200_hrt.c
> +++ b/drivers/clocksource/scx200_hrt.c
> @@ -83,7 +83,8 @@ static int __init init_hrt_clocksource(void)
>
> pr_info("enabling scx200 high-res timer (%s MHz +%d ppm)\n", mhz27 ? "27":"1", ppm);
>
> - return clocksource_register_hz(&cs_hrt, freq);
> + clocksource_register_hz(&cs_hrt, freq);
> + return 0;
> }
>
> module_init(init_hrt_clocksource);
> diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
> index 00fdd11..805245d 100644
> --- a/drivers/clocksource/tcb_clksrc.c
> +++ b/drivers/clocksource/tcb_clksrc.c
> @@ -340,9 +340,7 @@ static int __init tcb_clksrc_init(void)
> }
>
> /* and away we go! */
> - ret = clocksource_register_hz(&clksrc, divided_rate);
> - if (ret)
> - goto err_disable_t1;
> + clocksource_register_hz(&clksrc, divided_rate);
>
> /* channel 2: periodic and oneshot timer support */
> ret = setup_clkevents(tc, clk32k_divisor_idx);
> @@ -354,10 +352,6 @@ static int __init tcb_clksrc_init(void)
> err_unregister_clksrc:
> clocksource_unregister(&clksrc);
>
> -err_disable_t1:
> - if (!tc->tcb_config || tc->tcb_config->counter_width != 32)
> - clk_disable_unprepare(tc->clk[1]);
> -
> err_disable_t0:
> clk_disable_unprepare(t0_clk);
>
> diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
> index 09a17d9..ae78ce0 100644
> --- a/drivers/clocksource/timer-marco.c
> +++ b/drivers/clocksource/timer-marco.c
> @@ -283,7 +283,7 @@ static void __init sirfsoc_marco_timer_init(void)
> /* Clear all interrupts */
> writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
>
> - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
> + clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE);
>
> sirfsoc_clockevent_init();
> }
> diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
> index 8a492d3..c9cc307 100644
> --- a/drivers/clocksource/timer-prima2.c
> +++ b/drivers/clocksource/timer-prima2.c
> @@ -204,7 +204,7 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
> writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
> writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
>
> - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
> + clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE);
>
> sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
>
> diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
> index 1098ed3..13f5fa4 100644
> --- a/drivers/clocksource/vt8500_timer.c
> +++ b/drivers/clocksource/vt8500_timer.c
> @@ -150,9 +150,7 @@ static void __init vt8500_timer_init(struct device_node *np)
> writel(0xf, regbase + TIMER_STATUS_VAL);
> writel(~0, regbase + TIMER_MATCH_VAL);
>
> - if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
> - pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
> - __func__, clocksource.name);
> + clocksource_register_hz(&clocksource, VT8500_TIMER_HZ);
>
> clockevent.cpumask = cpumask_of(0);
>
> diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
> index 67301a4..5a17c5e 100644
> --- a/include/linux/clocksource.h
> +++ b/include/linux/clocksource.h
> @@ -282,7 +282,7 @@ static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
> }
>
>
> -extern int clocksource_register(struct clocksource*);
> +extern void clocksource_register(struct clocksource *);
> extern int clocksource_unregister(struct clocksource*);
> extern void clocksource_touch_watchdog(void);
> extern struct clocksource* clocksource_get_next(void);
> @@ -301,17 +301,17 @@ clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
> * Don't call __clocksource_register_scale directly, use
> * clocksource_register_hz/khz
> */
> -extern int
> +extern void
> __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
> extern void
> __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
>
> -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
> +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
> {
> return __clocksource_register_scale(cs, 1, hz);
> }
>
> -static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
> +static inline void clocksource_register_khz(struct clocksource *cs, u32 khz)
> {
> return __clocksource_register_scale(cs, 1000, khz);
> }
> diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
> index 9951575..686ff72 100644
> --- a/kernel/time/clocksource.c
> +++ b/kernel/time/clocksource.c
> @@ -782,7 +782,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
> * This *SHOULD NOT* be called directly! Please use the
> * clocksource_register_hz() or clocksource_register_khz helper functions.
> */
> -int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
> +void __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
> {
>
> /* Initialize mult/shift and max_idle_ns */
> @@ -794,7 +794,6 @@ int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
> clocksource_enqueue_watchdog(cs);
> clocksource_select();
> mutex_unlock(&clocksource_mutex);
> - return 0;
> }
> EXPORT_SYMBOL_GPL(__clocksource_register_scale);
>
> @@ -804,7 +803,7 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
> * @cs: clocksource to be registered
> *
> */
> -int clocksource_register(struct clocksource *cs)
> +void clocksource_register(struct clocksource *cs)
> {
> /* calculate max adjustment for given mult/shift */
> cs->maxadj = clocksource_max_adjustment(cs);
> @@ -820,7 +819,6 @@ int clocksource_register(struct clocksource *cs)
> clocksource_enqueue_watchdog(cs);
> clocksource_select();
> mutex_unlock(&clocksource_mutex);
> - return 0;
> }
> EXPORT_SYMBOL(clocksource_register);
>
> diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
> index 7a925ba..ae4c534 100644
> --- a/kernel/time/jiffies.c
> +++ b/kernel/time/jiffies.c
> @@ -88,7 +88,8 @@ EXPORT_SYMBOL(jiffies);
>
> static int __init init_jiffies_clocksource(void)
> {
> - return clocksource_register(&clocksource_jiffies);
> + clocksource_register(&clocksource_jiffies);
> + return 0;
> }
>
> core_initcall(init_jiffies_clocksource);
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 8:40 ` Daniel Lezcano
@ 2014-01-23 9:01 ` Yijing Wang
2014-01-23 9:01 ` Yijing Wang
2014-02-05 20:39 ` Thomas Gleixner
1 sibling, 1 reply; 20+ messages in thread
From: Yijing Wang @ 2014-01-23 9:01 UTC (permalink / raw)
To: Daniel Lezcano, John Stultz, Thomas Gleixner
Cc: Sekhar Nori, Kevin Hilman, Russell King, David Brown,
Daniel Walker, Bryan Huntsman, Tony Lindgren, Haavard Skinnemoen,
Hans-Christian Egtvedt, Mike Frysinger, Michal Simek,
Ralf Baechle, Jonas Bonn, Benjamin Herrenschmidt, Paul Mackerras,
Jeff Dike, Richard Weinberger, Ingo Molnar, H. Peter Anvin, x86,
Kukjin Kim, Jim Cromie, Nicolas Ferre, Barry Song, Tony Prisk,
davinci-linux-open-source, linux-arm-kernel, linux-arm-msm,
linux-omap, uclinux-dist-devel, microblaze-uclinux, linux-mips,
linux, linuxppc-dev, user-mode-linux-devel, user-mode-linux-user,
linux-samsung-soc, linux-kernel, Hanjun Guo
On 2014/1/23 16:40, Daniel Lezcano wrote:
> On 01/23/2014 08:12 AM, Yijing Wang wrote:
>> Currently, clocksource_register() and __clocksource_register_scale()
>> functions always return 0, it's pointless, make functions void.
>> And remove the dead code that check the clocksource_register_hz()
>> return value.
>>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>
> Well, do we really want to change all these files to not take care of a return value ? What about is we have to check it again later ?
>
> I would recommend to investigate __clocksource_register_scale and the underneath functions if there is not an error to be returned in the call stack somewhere which is ignored today.
>
> The same applies for clocksource_register.
Hi Daniel, thanks for your comment, all functions type under __clocksource_register_scale() are void.
This just is trivial cleanup patch, I don't know whether we will check these function return value again later.
If there is some possibility to check it again, I agree to keep them. Of course, this is all determined by Thomas.
Thanks!
Yijing.
>
>> ---
>> arch/arm/mach-davinci/time.c | 5 ++---
>> arch/arm/mach-msm/timer.c | 4 +---
>> arch/arm/mach-omap2/timer.c | 8 +++-----
>> arch/avr32/kernel/time.c | 4 +---
>> arch/blackfin/kernel/time-ts.c | 6 ++----
>> arch/microblaze/kernel/timer.c | 3 +--
>> arch/mips/jz4740/time.c | 6 +-----
>> arch/mips/loongson/common/cs5536/cs5536_mfgpt.c | 3 ++-
>> arch/openrisc/kernel/time.c | 3 +--
>> arch/powerpc/kernel/time.c | 6 +-----
>> arch/um/kernel/time.c | 6 +-----
>> arch/x86/platform/uv/uv_time.c | 14 ++++++--------
>> drivers/clocksource/acpi_pm.c | 3 ++-
>> drivers/clocksource/cadence_ttc_timer.c | 6 +-----
>> drivers/clocksource/exynos_mct.c | 4 +---
>> drivers/clocksource/i8253.c | 3 ++-
>> drivers/clocksource/mmio.c | 3 ++-
>> drivers/clocksource/samsung_pwm_timer.c | 5 +----
>> drivers/clocksource/scx200_hrt.c | 3 ++-
>> drivers/clocksource/tcb_clksrc.c | 8 +-------
>> drivers/clocksource/timer-marco.c | 2 +-
>> drivers/clocksource/timer-prima2.c | 2 +-
>> drivers/clocksource/vt8500_timer.c | 4 +---
>> include/linux/clocksource.h | 8 ++++----
>> kernel/time/clocksource.c | 6 ++----
>> kernel/time/jiffies.c | 3 ++-
>> 26 files changed, 45 insertions(+), 83 deletions(-)
>>
>> diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
>> index 56c6eb5..9536f85 100644
>> --- a/arch/arm/mach-davinci/time.c
>> +++ b/arch/arm/mach-davinci/time.c
>> @@ -387,9 +387,8 @@ void __init davinci_timer_init(void)
>>
>> /* setup clocksource */
>> clocksource_davinci.name = id_to_name[clocksource_id];
>> - if (clocksource_register_hz(&clocksource_davinci,
>> - davinci_clock_tick_rate))
>> - printk(err, clocksource_davinci.name);
>> + clocksource_register_hz(&clocksource_davinci,
>> + davinci_clock_tick_rate);
>>
>> setup_sched_clock(davinci_read_sched_clock, 32,
>> davinci_clock_tick_rate);
>> diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
>> index 1e9c338..c96e034 100644
>> --- a/arch/arm/mach-msm/timer.c
>> +++ b/arch/arm/mach-msm/timer.c
>> @@ -226,9 +226,7 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
>>
>> err:
>> writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
>> - res = clocksource_register_hz(cs, dgt_hz);
>> - if (res)
>> - pr_err("clocksource_register failed\n");
>> + clocksource_register_hz(cs, dgt_hz);
>> setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz);
>> }
>>
>> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
>> index 3ca81e0..beaf7c7 100644
>> --- a/arch/arm/mach-omap2/timer.c
>> +++ b/arch/arm/mach-omap2/timer.c
>> @@ -473,11 +473,9 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
>> OMAP_TIMER_NONPOSTED);
>> setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
>>
>> - if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
>> - pr_err("Could not register clocksource %s\n",
>> - clocksource_gpt.name);
>> - else
>> - pr_info("OMAP clocksource: %s at %lu Hz\n",
>> + clocksource_register_hz(&clocksource_gpt, clksrc.rate);
>> +
>> + pr_info("OMAP clocksource: %s at %lu Hz\n",
>> clocksource_gpt.name, clksrc.rate);
>> }
>>
>> diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
>> index d0f771b..51b4a66 100644
>> --- a/arch/avr32/kernel/time.c
>> +++ b/arch/avr32/kernel/time.c
>> @@ -134,9 +134,7 @@ void __init time_init(void)
>>
>> /* figure rate for counter */
>> counter_hz = clk_get_rate(boot_cpu_data.clk);
>> - ret = clocksource_register_hz(&counter, counter_hz);
>> - if (ret)
>> - pr_debug("timer: could not register clocksource: %d\n", ret);
>> + clocksource_register_hz(&counter, counter_hz);
>>
>> /* setup COMPARE clockevent */
>> comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
>> diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
>> index cb0a484..df3bb08 100644
>> --- a/arch/blackfin/kernel/time-ts.c
>> +++ b/arch/blackfin/kernel/time-ts.c
>> @@ -51,8 +51,7 @@ static inline unsigned long long bfin_cs_cycles_sched_clock(void)
>>
>> static int __init bfin_cs_cycles_init(void)
>> {
>> - if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
>> - panic("failed to register clocksource");
>> + clocksource_register_hz(&bfin_cs_cycles, get_cclk());
>>
>> return 0;
>> }
>> @@ -103,8 +102,7 @@ static int __init bfin_cs_gptimer0_init(void)
>> {
>> setup_gptimer0();
>>
>> - if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
>> - panic("failed to register clocksource");
>> + clocksource_register_hz(&bfin_cs_gptimer0, get_sclk());
>>
>> return 0;
>> }
>> diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
>> index 3e39b10..6a2417e 100644
>> --- a/arch/microblaze/kernel/timer.c
>> +++ b/arch/microblaze/kernel/timer.c
>> @@ -208,8 +208,7 @@ static struct clocksource clocksource_microblaze = {
>>
>> static int __init xilinx_clocksource_init(void)
>> {
>> - if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
>> - panic("failed to register clocksource");
>> + clocksource_register_hz(&clocksource_microblaze, timer_clock_freq);
>>
>> /* stop timer1 */
>> out_be32(timer_baseaddr + TCSR1,
>> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
>> index 5e430ce..041cdff 100644
>> --- a/arch/mips/jz4740/time.c
>> +++ b/arch/mips/jz4740/time.c
>> @@ -105,7 +105,6 @@ static struct irqaction timer_irqaction = {
>>
>> void __init plat_time_init(void)
>> {
>> - int ret;
>> uint32_t clk_rate;
>> uint16_t ctrl;
>>
>> @@ -121,10 +120,7 @@ void __init plat_time_init(void)
>>
>> clockevents_register_device(&jz4740_clockevent);
>>
>> - ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
>> -
>> - if (ret)
>> - printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
>> + clocksource_register_hz(&jz4740_clocksource, clk_rate);
>>
>> setup_irq(JZ4740_IRQ_TCU0, &timer_irqaction);
>>
>> diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
>> index c639b9d..9fa6d99 100644
>> --- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
>> +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
>> @@ -208,7 +208,8 @@ int __init init_mfgpt_clocksource(void)
>> if (num_possible_cpus() > 1) /* MFGPT does not scale! */
>> return 0;
>>
>> - return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
>> + clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
>> + return 0;
>> }
>>
>> arch_initcall(init_mfgpt_clocksource);
>> diff --git a/arch/openrisc/kernel/time.c b/arch/openrisc/kernel/time.c
>> index 7c52e94..3f789aa 100644
>> --- a/arch/openrisc/kernel/time.c
>> +++ b/arch/openrisc/kernel/time.c
>> @@ -156,8 +156,7 @@ static struct clocksource openrisc_timer = {
>>
>> static int __init openrisc_timer_init(void)
>> {
>> - if (clocksource_register_hz(&openrisc_timer, cpuinfo.clock_frequency))
>> - panic("failed to register clocksource");
>> + clocksource_register_hz(&openrisc_timer, cpuinfo.clock_frequency);
>>
>> /* Enable the incrementer: 'continuous' mode with interrupt disabled */
>> mtspr(SPR_TTMR, SPR_TTMR_CR);
>> diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
>> index b3b1441..27c0627 100644
>> --- a/arch/powerpc/kernel/time.c
>> +++ b/arch/powerpc/kernel/time.c
>> @@ -788,11 +788,7 @@ static void __init clocksource_init(void)
>> else
>> clock = &clocksource_timebase;
>>
>> - if (clocksource_register_hz(clock, tb_ticks_per_sec)) {
>> - printk(KERN_ERR "clocksource: %s is already registered\n",
>> - clock->name);
>> - return;
>> - }
>> + clocksource_register_hz(clock, tb_ticks_per_sec);
>>
>> printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n",
>> clock->name, clock->mult, clock->shift);
>> diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
>> index 117568d..2034b58 100644
>> --- a/arch/um/kernel/time.c
>> +++ b/arch/um/kernel/time.c
>> @@ -92,11 +92,7 @@ static void __init setup_itimer(void)
>> clockevent_delta2ns(60 * HZ, &itimer_clockevent);
>> itimer_clockevent.min_delta_ns =
>> clockevent_delta2ns(1, &itimer_clockevent);
>> - err = clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
>> - if (err) {
>> - printk(KERN_ERR "clocksource_register_hz returned %d\n", err);
>> - return;
>> - }
>> + clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
>> clockevents_register_device(&itimer_clockevent);
>> }
>>
>> diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
>> index 5c86786..b963774 100644
>> --- a/arch/x86/platform/uv/uv_time.c
>> +++ b/arch/x86/platform/uv/uv_time.c
>> @@ -379,15 +379,13 @@ static __init int uv_rtc_setup_clock(void)
>> if (!is_uv_system())
>> return -ENODEV;
>>
>> - rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
>> - if (rc)
>> - printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
>> - else
>> - printk(KERN_INFO "UV RTC clocksource registered freq %lu MHz\n",
>> - sn_rtc_cycles_per_second/(unsigned long)1E6);
>> + clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
>> +
>> + pr_info("UV RTC clocksource registered freq %lu MHz\n",
>> + sn_rtc_cycles_per_second/(unsigned long)1E6);
>>
>> - if (rc || !uv_rtc_evt_enable || x86_platform_ipi_callback)
>> - return rc;
>> + if (!uv_rtc_evt_enable || x86_platform_ipi_callback)
>> + return 0;
>>
>> /* Setup and register clockevents */
>> rc = uv_rtc_allocate_timers();
>> diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
>> index 6eab889..ab1dc63 100644
>> --- a/drivers/clocksource/acpi_pm.c
>> +++ b/drivers/clocksource/acpi_pm.c
>> @@ -218,8 +218,9 @@ static int __init init_acpi_pm_clocksource(void)
>> return -ENODEV;
>> }
>>
>> - return clocksource_register_hz(&clocksource_acpi_pm,
>> + clocksource_register_hz(&clocksource_acpi_pm,
>> PMTMR_TICKS_PER_SEC);
>> + return 0;
>> }
>>
>> /* We use fs_initcall because we want the PCI fixups to have run
>> diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
>> index 63f176d..b9b56ed 100644
>> --- a/drivers/clocksource/cadence_ttc_timer.c
>> +++ b/drivers/clocksource/cadence_ttc_timer.c
>> @@ -301,11 +301,7 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
>> __raw_writel(CNT_CNTRL_RESET,
>> ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
>>
>> - err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
>> - if (WARN_ON(err)) {
>> - kfree(ttccs);
>> - return;
>> - }
>> + clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
>>
>> ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
>> sched_clock_register(ttc_sched_clock_read, 16, ttccs->ttc.freq / PRESCALE);
>> diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
>> index 62b0de6..98649c7 100644
>> --- a/drivers/clocksource/exynos_mct.c
>> +++ b/drivers/clocksource/exynos_mct.c
>> @@ -193,9 +193,7 @@ struct clocksource mct_frc = {
>> static void __init exynos4_clocksource_init(void)
>> {
>> exynos4_mct_frc_start(0, 0);
>> -
>> - if (clocksource_register_hz(&mct_frc, clk_rate))
>> - panic("%s: can't register clocksource\n", mct_frc.name);
>> + clocksource_register_hz(&mct_frc, clk_rate);
>> }
>>
>> static void exynos4_mct_comp0_stop(void)
>> diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
>> index 14ee3ef..9c45f0a 100644
>> --- a/drivers/clocksource/i8253.c
>> +++ b/drivers/clocksource/i8253.c
>> @@ -95,7 +95,8 @@ static struct clocksource i8253_cs = {
>>
>> int __init clocksource_i8253_init(void)
>> {
>> - return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
>> + clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
>> + return 0;
>> }
>> #endif
>>
>> diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
>> index c0e2512..6e0b530 100644
>> --- a/drivers/clocksource/mmio.c
>> +++ b/drivers/clocksource/mmio.c
>> @@ -69,5 +69,6 @@ int __init clocksource_mmio_init(void __iomem *base, const char *name,
>> cs->clksrc.mask = CLOCKSOURCE_MASK(bits);
>> cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
>>
>> - return clocksource_register_hz(&cs->clksrc, hz);
>> + clocksource_register_hz(&cs->clksrc, hz);
>> + return 0;
>> }
>> diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
>> index 5645cfc..c59292f 100644
>> --- a/drivers/clocksource/samsung_pwm_timer.c
>> +++ b/drivers/clocksource/samsung_pwm_timer.c
>> @@ -340,7 +340,6 @@ static void __init samsung_clocksource_init(void)
>> {
>> unsigned long pclk;
>> unsigned long clock_rate;
>> - int ret;
>>
>> pclk = clk_get_rate(pwm.timerclk);
>>
>> @@ -361,9 +360,7 @@ static void __init samsung_clocksource_init(void)
>> pwm.variant.bits, clock_rate);
>>
>> samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits);
>> - ret = clocksource_register_hz(&samsung_clocksource, clock_rate);
>> - if (ret)
>> - panic("samsung_clocksource_timer: can't register clocksource\n");
>> + clocksource_register_hz(&samsung_clocksource, clock_rate);
>> }
>>
>> static void __init samsung_timer_resources(void)
>> diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
>> index 64f9e82..57bdc04 100644
>> --- a/drivers/clocksource/scx200_hrt.c
>> +++ b/drivers/clocksource/scx200_hrt.c
>> @@ -83,7 +83,8 @@ static int __init init_hrt_clocksource(void)
>>
>> pr_info("enabling scx200 high-res timer (%s MHz +%d ppm)\n", mhz27 ? "27":"1", ppm);
>>
>> - return clocksource_register_hz(&cs_hrt, freq);
>> + clocksource_register_hz(&cs_hrt, freq);
>> + return 0;
>> }
>>
>> module_init(init_hrt_clocksource);
>> diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
>> index 00fdd11..805245d 100644
>> --- a/drivers/clocksource/tcb_clksrc.c
>> +++ b/drivers/clocksource/tcb_clksrc.c
>> @@ -340,9 +340,7 @@ static int __init tcb_clksrc_init(void)
>> }
>>
>> /* and away we go! */
>> - ret = clocksource_register_hz(&clksrc, divided_rate);
>> - if (ret)
>> - goto err_disable_t1;
>> + clocksource_register_hz(&clksrc, divided_rate);
>>
>> /* channel 2: periodic and oneshot timer support */
>> ret = setup_clkevents(tc, clk32k_divisor_idx);
>> @@ -354,10 +352,6 @@ static int __init tcb_clksrc_init(void)
>> err_unregister_clksrc:
>> clocksource_unregister(&clksrc);
>>
>> -err_disable_t1:
>> - if (!tc->tcb_config || tc->tcb_config->counter_width != 32)
>> - clk_disable_unprepare(tc->clk[1]);
>> -
>> err_disable_t0:
>> clk_disable_unprepare(t0_clk);
>>
>> diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
>> index 09a17d9..ae78ce0 100644
>> --- a/drivers/clocksource/timer-marco.c
>> +++ b/drivers/clocksource/timer-marco.c
>> @@ -283,7 +283,7 @@ static void __init sirfsoc_marco_timer_init(void)
>> /* Clear all interrupts */
>> writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
>>
>> - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
>> + clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE);
>>
>> sirfsoc_clockevent_init();
>> }
>> diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
>> index 8a492d3..c9cc307 100644
>> --- a/drivers/clocksource/timer-prima2.c
>> +++ b/drivers/clocksource/timer-prima2.c
>> @@ -204,7 +204,7 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
>> writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
>> writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
>>
>> - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
>> + clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE);
>>
>> sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
>>
>> diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
>> index 1098ed3..13f5fa4 100644
>> --- a/drivers/clocksource/vt8500_timer.c
>> +++ b/drivers/clocksource/vt8500_timer.c
>> @@ -150,9 +150,7 @@ static void __init vt8500_timer_init(struct device_node *np)
>> writel(0xf, regbase + TIMER_STATUS_VAL);
>> writel(~0, regbase + TIMER_MATCH_VAL);
>>
>> - if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
>> - pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
>> - __func__, clocksource.name);
>> + clocksource_register_hz(&clocksource, VT8500_TIMER_HZ);
>>
>> clockevent.cpumask = cpumask_of(0);
>>
>> diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
>> index 67301a4..5a17c5e 100644
>> --- a/include/linux/clocksource.h
>> +++ b/include/linux/clocksource.h
>> @@ -282,7 +282,7 @@ static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
>> }
>>
>>
>> -extern int clocksource_register(struct clocksource*);
>> +extern void clocksource_register(struct clocksource *);
>> extern int clocksource_unregister(struct clocksource*);
>> extern void clocksource_touch_watchdog(void);
>> extern struct clocksource* clocksource_get_next(void);
>> @@ -301,17 +301,17 @@ clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
>> * Don't call __clocksource_register_scale directly, use
>> * clocksource_register_hz/khz
>> */
>> -extern int
>> +extern void
>> __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
>> extern void
>> __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
>>
>> -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
>> +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
>> {
>> return __clocksource_register_scale(cs, 1, hz);
>> }
>>
>> -static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
>> +static inline void clocksource_register_khz(struct clocksource *cs, u32 khz)
>> {
>> return __clocksource_register_scale(cs, 1000, khz);
>> }
>> diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
>> index 9951575..686ff72 100644
>> --- a/kernel/time/clocksource.c
>> +++ b/kernel/time/clocksource.c
>> @@ -782,7 +782,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
>> * This *SHOULD NOT* be called directly! Please use the
>> * clocksource_register_hz() or clocksource_register_khz helper functions.
>> */
>> -int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
>> +void __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
>> {
>>
>> /* Initialize mult/shift and max_idle_ns */
>> @@ -794,7 +794,6 @@ int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
>> clocksource_enqueue_watchdog(cs);
>> clocksource_select();
>> mutex_unlock(&clocksource_mutex);
>> - return 0;
>> }
>> EXPORT_SYMBOL_GPL(__clocksource_register_scale);
>>
>> @@ -804,7 +803,7 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
>> * @cs: clocksource to be registered
>> *
>> */
>> -int clocksource_register(struct clocksource *cs)
>> +void clocksource_register(struct clocksource *cs)
>> {
>> /* calculate max adjustment for given mult/shift */
>> cs->maxadj = clocksource_max_adjustment(cs);
>> @@ -820,7 +819,6 @@ int clocksource_register(struct clocksource *cs)
>> clocksource_enqueue_watchdog(cs);
>> clocksource_select();
>> mutex_unlock(&clocksource_mutex);
>> - return 0;
>> }
>> EXPORT_SYMBOL(clocksource_register);
>>
>> diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
>> index 7a925ba..ae4c534 100644
>> --- a/kernel/time/jiffies.c
>> +++ b/kernel/time/jiffies.c
>> @@ -88,7 +88,8 @@ EXPORT_SYMBOL(jiffies);
>>
>> static int __init init_jiffies_clocksource(void)
>> {
>> - return clocksource_register(&clocksource_jiffies);
>> + clocksource_register(&clocksource_jiffies);
>> + return 0;
>> }
>>
>> core_initcall(init_jiffies_clocksource);
>>
>
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 9:01 ` Yijing Wang
@ 2014-01-23 9:01 ` Yijing Wang
0 siblings, 0 replies; 20+ messages in thread
From: Yijing Wang @ 2014-01-23 9:01 UTC (permalink / raw)
To: Daniel Lezcano, John Stultz, Thomas Gleixner
Cc: Sekhar Nori, Kevin Hilman, Russell King, David Brown,
Daniel Walker, Bryan Huntsman, Tony Lindgren, Haavard Skinnemoen,
Hans-Christian Egtvedt, Mike Frysinger, Michal Simek,
Ralf Baechle, Jonas Bonn, Benjamin Herrenschmidt, Paul Mackerras,
Jeff Dike, Richard Weinberger, Ingo Molnar, H. Peter Anvin, x86,
Kukjin Kim, Jim Cromie, Nicolas Ferre, Barry Song, Tony Prisk,
davinci-linux-open-source, linux-arm-kernel, linux-arm-msm,
linux-omap, uclinux-dist-devel, microblaze-uclinux, linux-mips,
linux, linuxppc-dev, user-mode-linux-devel, user-mode-linux-user,
linux-samsung-soc, linux-kernel, Hanjun Guo
On 2014/1/23 16:40, Daniel Lezcano wrote:
> On 01/23/2014 08:12 AM, Yijing Wang wrote:
>> Currently, clocksource_register() and __clocksource_register_scale()
>> functions always return 0, it's pointless, make functions void.
>> And remove the dead code that check the clocksource_register_hz()
>> return value.
>>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>
> Well, do we really want to change all these files to not take care of a return value ? What about is we have to check it again later ?
>
> I would recommend to investigate __clocksource_register_scale and the underneath functions if there is not an error to be returned in the call stack somewhere which is ignored today.
>
> The same applies for clocksource_register.
Hi Daniel, thanks for your comment, all functions type under __clocksource_register_scale() are void.
This just is trivial cleanup patch, I don't know whether we will check these function return value again later.
If there is some possibility to check it again, I agree to keep them. Of course, this is all determined by Thomas.
Thanks!
Yijing.
>
>> ---
>> arch/arm/mach-davinci/time.c | 5 ++---
>> arch/arm/mach-msm/timer.c | 4 +---
>> arch/arm/mach-omap2/timer.c | 8 +++-----
>> arch/avr32/kernel/time.c | 4 +---
>> arch/blackfin/kernel/time-ts.c | 6 ++----
>> arch/microblaze/kernel/timer.c | 3 +--
>> arch/mips/jz4740/time.c | 6 +-----
>> arch/mips/loongson/common/cs5536/cs5536_mfgpt.c | 3 ++-
>> arch/openrisc/kernel/time.c | 3 +--
>> arch/powerpc/kernel/time.c | 6 +-----
>> arch/um/kernel/time.c | 6 +-----
>> arch/x86/platform/uv/uv_time.c | 14 ++++++--------
>> drivers/clocksource/acpi_pm.c | 3 ++-
>> drivers/clocksource/cadence_ttc_timer.c | 6 +-----
>> drivers/clocksource/exynos_mct.c | 4 +---
>> drivers/clocksource/i8253.c | 3 ++-
>> drivers/clocksource/mmio.c | 3 ++-
>> drivers/clocksource/samsung_pwm_timer.c | 5 +----
>> drivers/clocksource/scx200_hrt.c | 3 ++-
>> drivers/clocksource/tcb_clksrc.c | 8 +-------
>> drivers/clocksource/timer-marco.c | 2 +-
>> drivers/clocksource/timer-prima2.c | 2 +-
>> drivers/clocksource/vt8500_timer.c | 4 +---
>> include/linux/clocksource.h | 8 ++++----
>> kernel/time/clocksource.c | 6 ++----
>> kernel/time/jiffies.c | 3 ++-
>> 26 files changed, 45 insertions(+), 83 deletions(-)
>>
>> diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
>> index 56c6eb5..9536f85 100644
>> --- a/arch/arm/mach-davinci/time.c
>> +++ b/arch/arm/mach-davinci/time.c
>> @@ -387,9 +387,8 @@ void __init davinci_timer_init(void)
>>
>> /* setup clocksource */
>> clocksource_davinci.name = id_to_name[clocksource_id];
>> - if (clocksource_register_hz(&clocksource_davinci,
>> - davinci_clock_tick_rate))
>> - printk(err, clocksource_davinci.name);
>> + clocksource_register_hz(&clocksource_davinci,
>> + davinci_clock_tick_rate);
>>
>> setup_sched_clock(davinci_read_sched_clock, 32,
>> davinci_clock_tick_rate);
>> diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
>> index 1e9c338..c96e034 100644
>> --- a/arch/arm/mach-msm/timer.c
>> +++ b/arch/arm/mach-msm/timer.c
>> @@ -226,9 +226,7 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
>>
>> err:
>> writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
>> - res = clocksource_register_hz(cs, dgt_hz);
>> - if (res)
>> - pr_err("clocksource_register failed\n");
>> + clocksource_register_hz(cs, dgt_hz);
>> setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz);
>> }
>>
>> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
>> index 3ca81e0..beaf7c7 100644
>> --- a/arch/arm/mach-omap2/timer.c
>> +++ b/arch/arm/mach-omap2/timer.c
>> @@ -473,11 +473,9 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
>> OMAP_TIMER_NONPOSTED);
>> setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
>>
>> - if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
>> - pr_err("Could not register clocksource %s\n",
>> - clocksource_gpt.name);
>> - else
>> - pr_info("OMAP clocksource: %s at %lu Hz\n",
>> + clocksource_register_hz(&clocksource_gpt, clksrc.rate);
>> +
>> + pr_info("OMAP clocksource: %s at %lu Hz\n",
>> clocksource_gpt.name, clksrc.rate);
>> }
>>
>> diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
>> index d0f771b..51b4a66 100644
>> --- a/arch/avr32/kernel/time.c
>> +++ b/arch/avr32/kernel/time.c
>> @@ -134,9 +134,7 @@ void __init time_init(void)
>>
>> /* figure rate for counter */
>> counter_hz = clk_get_rate(boot_cpu_data.clk);
>> - ret = clocksource_register_hz(&counter, counter_hz);
>> - if (ret)
>> - pr_debug("timer: could not register clocksource: %d\n", ret);
>> + clocksource_register_hz(&counter, counter_hz);
>>
>> /* setup COMPARE clockevent */
>> comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
>> diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
>> index cb0a484..df3bb08 100644
>> --- a/arch/blackfin/kernel/time-ts.c
>> +++ b/arch/blackfin/kernel/time-ts.c
>> @@ -51,8 +51,7 @@ static inline unsigned long long bfin_cs_cycles_sched_clock(void)
>>
>> static int __init bfin_cs_cycles_init(void)
>> {
>> - if (clocksource_register_hz(&bfin_cs_cycles, get_cclk()))
>> - panic("failed to register clocksource");
>> + clocksource_register_hz(&bfin_cs_cycles, get_cclk());
>>
>> return 0;
>> }
>> @@ -103,8 +102,7 @@ static int __init bfin_cs_gptimer0_init(void)
>> {
>> setup_gptimer0();
>>
>> - if (clocksource_register_hz(&bfin_cs_gptimer0, get_sclk()))
>> - panic("failed to register clocksource");
>> + clocksource_register_hz(&bfin_cs_gptimer0, get_sclk());
>>
>> return 0;
>> }
>> diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
>> index 3e39b10..6a2417e 100644
>> --- a/arch/microblaze/kernel/timer.c
>> +++ b/arch/microblaze/kernel/timer.c
>> @@ -208,8 +208,7 @@ static struct clocksource clocksource_microblaze = {
>>
>> static int __init xilinx_clocksource_init(void)
>> {
>> - if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
>> - panic("failed to register clocksource");
>> + clocksource_register_hz(&clocksource_microblaze, timer_clock_freq);
>>
>> /* stop timer1 */
>> out_be32(timer_baseaddr + TCSR1,
>> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
>> index 5e430ce..041cdff 100644
>> --- a/arch/mips/jz4740/time.c
>> +++ b/arch/mips/jz4740/time.c
>> @@ -105,7 +105,6 @@ static struct irqaction timer_irqaction = {
>>
>> void __init plat_time_init(void)
>> {
>> - int ret;
>> uint32_t clk_rate;
>> uint16_t ctrl;
>>
>> @@ -121,10 +120,7 @@ void __init plat_time_init(void)
>>
>> clockevents_register_device(&jz4740_clockevent);
>>
>> - ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
>> -
>> - if (ret)
>> - printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
>> + clocksource_register_hz(&jz4740_clocksource, clk_rate);
>>
>> setup_irq(JZ4740_IRQ_TCU0, &timer_irqaction);
>>
>> diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
>> index c639b9d..9fa6d99 100644
>> --- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
>> +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
>> @@ -208,7 +208,8 @@ int __init init_mfgpt_clocksource(void)
>> if (num_possible_cpus() > 1) /* MFGPT does not scale! */
>> return 0;
>>
>> - return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
>> + clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
>> + return 0;
>> }
>>
>> arch_initcall(init_mfgpt_clocksource);
>> diff --git a/arch/openrisc/kernel/time.c b/arch/openrisc/kernel/time.c
>> index 7c52e94..3f789aa 100644
>> --- a/arch/openrisc/kernel/time.c
>> +++ b/arch/openrisc/kernel/time.c
>> @@ -156,8 +156,7 @@ static struct clocksource openrisc_timer = {
>>
>> static int __init openrisc_timer_init(void)
>> {
>> - if (clocksource_register_hz(&openrisc_timer, cpuinfo.clock_frequency))
>> - panic("failed to register clocksource");
>> + clocksource_register_hz(&openrisc_timer, cpuinfo.clock_frequency);
>>
>> /* Enable the incrementer: 'continuous' mode with interrupt disabled */
>> mtspr(SPR_TTMR, SPR_TTMR_CR);
>> diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
>> index b3b1441..27c0627 100644
>> --- a/arch/powerpc/kernel/time.c
>> +++ b/arch/powerpc/kernel/time.c
>> @@ -788,11 +788,7 @@ static void __init clocksource_init(void)
>> else
>> clock = &clocksource_timebase;
>>
>> - if (clocksource_register_hz(clock, tb_ticks_per_sec)) {
>> - printk(KERN_ERR "clocksource: %s is already registered\n",
>> - clock->name);
>> - return;
>> - }
>> + clocksource_register_hz(clock, tb_ticks_per_sec);
>>
>> printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n",
>> clock->name, clock->mult, clock->shift);
>> diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
>> index 117568d..2034b58 100644
>> --- a/arch/um/kernel/time.c
>> +++ b/arch/um/kernel/time.c
>> @@ -92,11 +92,7 @@ static void __init setup_itimer(void)
>> clockevent_delta2ns(60 * HZ, &itimer_clockevent);
>> itimer_clockevent.min_delta_ns =
>> clockevent_delta2ns(1, &itimer_clockevent);
>> - err = clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
>> - if (err) {
>> - printk(KERN_ERR "clocksource_register_hz returned %d\n", err);
>> - return;
>> - }
>> + clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
>> clockevents_register_device(&itimer_clockevent);
>> }
>>
>> diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
>> index 5c86786..b963774 100644
>> --- a/arch/x86/platform/uv/uv_time.c
>> +++ b/arch/x86/platform/uv/uv_time.c
>> @@ -379,15 +379,13 @@ static __init int uv_rtc_setup_clock(void)
>> if (!is_uv_system())
>> return -ENODEV;
>>
>> - rc = clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
>> - if (rc)
>> - printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
>> - else
>> - printk(KERN_INFO "UV RTC clocksource registered freq %lu MHz\n",
>> - sn_rtc_cycles_per_second/(unsigned long)1E6);
>> + clocksource_register_hz(&clocksource_uv, sn_rtc_cycles_per_second);
>> +
>> + pr_info("UV RTC clocksource registered freq %lu MHz\n",
>> + sn_rtc_cycles_per_second/(unsigned long)1E6);
>>
>> - if (rc || !uv_rtc_evt_enable || x86_platform_ipi_callback)
>> - return rc;
>> + if (!uv_rtc_evt_enable || x86_platform_ipi_callback)
>> + return 0;
>>
>> /* Setup and register clockevents */
>> rc = uv_rtc_allocate_timers();
>> diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
>> index 6eab889..ab1dc63 100644
>> --- a/drivers/clocksource/acpi_pm.c
>> +++ b/drivers/clocksource/acpi_pm.c
>> @@ -218,8 +218,9 @@ static int __init init_acpi_pm_clocksource(void)
>> return -ENODEV;
>> }
>>
>> - return clocksource_register_hz(&clocksource_acpi_pm,
>> + clocksource_register_hz(&clocksource_acpi_pm,
>> PMTMR_TICKS_PER_SEC);
>> + return 0;
>> }
>>
>> /* We use fs_initcall because we want the PCI fixups to have run
>> diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
>> index 63f176d..b9b56ed 100644
>> --- a/drivers/clocksource/cadence_ttc_timer.c
>> +++ b/drivers/clocksource/cadence_ttc_timer.c
>> @@ -301,11 +301,7 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
>> __raw_writel(CNT_CNTRL_RESET,
>> ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
>>
>> - err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
>> - if (WARN_ON(err)) {
>> - kfree(ttccs);
>> - return;
>> - }
>> + clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
>>
>> ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
>> sched_clock_register(ttc_sched_clock_read, 16, ttccs->ttc.freq / PRESCALE);
>> diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
>> index 62b0de6..98649c7 100644
>> --- a/drivers/clocksource/exynos_mct.c
>> +++ b/drivers/clocksource/exynos_mct.c
>> @@ -193,9 +193,7 @@ struct clocksource mct_frc = {
>> static void __init exynos4_clocksource_init(void)
>> {
>> exynos4_mct_frc_start(0, 0);
>> -
>> - if (clocksource_register_hz(&mct_frc, clk_rate))
>> - panic("%s: can't register clocksource\n", mct_frc.name);
>> + clocksource_register_hz(&mct_frc, clk_rate);
>> }
>>
>> static void exynos4_mct_comp0_stop(void)
>> diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
>> index 14ee3ef..9c45f0a 100644
>> --- a/drivers/clocksource/i8253.c
>> +++ b/drivers/clocksource/i8253.c
>> @@ -95,7 +95,8 @@ static struct clocksource i8253_cs = {
>>
>> int __init clocksource_i8253_init(void)
>> {
>> - return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
>> + clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
>> + return 0;
>> }
>> #endif
>>
>> diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
>> index c0e2512..6e0b530 100644
>> --- a/drivers/clocksource/mmio.c
>> +++ b/drivers/clocksource/mmio.c
>> @@ -69,5 +69,6 @@ int __init clocksource_mmio_init(void __iomem *base, const char *name,
>> cs->clksrc.mask = CLOCKSOURCE_MASK(bits);
>> cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
>>
>> - return clocksource_register_hz(&cs->clksrc, hz);
>> + clocksource_register_hz(&cs->clksrc, hz);
>> + return 0;
>> }
>> diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
>> index 5645cfc..c59292f 100644
>> --- a/drivers/clocksource/samsung_pwm_timer.c
>> +++ b/drivers/clocksource/samsung_pwm_timer.c
>> @@ -340,7 +340,6 @@ static void __init samsung_clocksource_init(void)
>> {
>> unsigned long pclk;
>> unsigned long clock_rate;
>> - int ret;
>>
>> pclk = clk_get_rate(pwm.timerclk);
>>
>> @@ -361,9 +360,7 @@ static void __init samsung_clocksource_init(void)
>> pwm.variant.bits, clock_rate);
>>
>> samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits);
>> - ret = clocksource_register_hz(&samsung_clocksource, clock_rate);
>> - if (ret)
>> - panic("samsung_clocksource_timer: can't register clocksource\n");
>> + clocksource_register_hz(&samsung_clocksource, clock_rate);
>> }
>>
>> static void __init samsung_timer_resources(void)
>> diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
>> index 64f9e82..57bdc04 100644
>> --- a/drivers/clocksource/scx200_hrt.c
>> +++ b/drivers/clocksource/scx200_hrt.c
>> @@ -83,7 +83,8 @@ static int __init init_hrt_clocksource(void)
>>
>> pr_info("enabling scx200 high-res timer (%s MHz +%d ppm)\n", mhz27 ? "27":"1", ppm);
>>
>> - return clocksource_register_hz(&cs_hrt, freq);
>> + clocksource_register_hz(&cs_hrt, freq);
>> + return 0;
>> }
>>
>> module_init(init_hrt_clocksource);
>> diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
>> index 00fdd11..805245d 100644
>> --- a/drivers/clocksource/tcb_clksrc.c
>> +++ b/drivers/clocksource/tcb_clksrc.c
>> @@ -340,9 +340,7 @@ static int __init tcb_clksrc_init(void)
>> }
>>
>> /* and away we go! */
>> - ret = clocksource_register_hz(&clksrc, divided_rate);
>> - if (ret)
>> - goto err_disable_t1;
>> + clocksource_register_hz(&clksrc, divided_rate);
>>
>> /* channel 2: periodic and oneshot timer support */
>> ret = setup_clkevents(tc, clk32k_divisor_idx);
>> @@ -354,10 +352,6 @@ static int __init tcb_clksrc_init(void)
>> err_unregister_clksrc:
>> clocksource_unregister(&clksrc);
>>
>> -err_disable_t1:
>> - if (!tc->tcb_config || tc->tcb_config->counter_width != 32)
>> - clk_disable_unprepare(tc->clk[1]);
>> -
>> err_disable_t0:
>> clk_disable_unprepare(t0_clk);
>>
>> diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
>> index 09a17d9..ae78ce0 100644
>> --- a/drivers/clocksource/timer-marco.c
>> +++ b/drivers/clocksource/timer-marco.c
>> @@ -283,7 +283,7 @@ static void __init sirfsoc_marco_timer_init(void)
>> /* Clear all interrupts */
>> writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
>>
>> - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
>> + clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE);
>>
>> sirfsoc_clockevent_init();
>> }
>> diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
>> index 8a492d3..c9cc307 100644
>> --- a/drivers/clocksource/timer-prima2.c
>> +++ b/drivers/clocksource/timer-prima2.c
>> @@ -204,7 +204,7 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
>> writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
>> writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
>>
>> - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
>> + clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE);
>>
>> sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
>>
>> diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
>> index 1098ed3..13f5fa4 100644
>> --- a/drivers/clocksource/vt8500_timer.c
>> +++ b/drivers/clocksource/vt8500_timer.c
>> @@ -150,9 +150,7 @@ static void __init vt8500_timer_init(struct device_node *np)
>> writel(0xf, regbase + TIMER_STATUS_VAL);
>> writel(~0, regbase + TIMER_MATCH_VAL);
>>
>> - if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
>> - pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
>> - __func__, clocksource.name);
>> + clocksource_register_hz(&clocksource, VT8500_TIMER_HZ);
>>
>> clockevent.cpumask = cpumask_of(0);
>>
>> diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
>> index 67301a4..5a17c5e 100644
>> --- a/include/linux/clocksource.h
>> +++ b/include/linux/clocksource.h
>> @@ -282,7 +282,7 @@ static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
>> }
>>
>>
>> -extern int clocksource_register(struct clocksource*);
>> +extern void clocksource_register(struct clocksource *);
>> extern int clocksource_unregister(struct clocksource*);
>> extern void clocksource_touch_watchdog(void);
>> extern struct clocksource* clocksource_get_next(void);
>> @@ -301,17 +301,17 @@ clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
>> * Don't call __clocksource_register_scale directly, use
>> * clocksource_register_hz/khz
>> */
>> -extern int
>> +extern void
>> __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
>> extern void
>> __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
>>
>> -static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
>> +static inline void clocksource_register_hz(struct clocksource *cs, u32 hz)
>> {
>> return __clocksource_register_scale(cs, 1, hz);
>> }
>>
>> -static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
>> +static inline void clocksource_register_khz(struct clocksource *cs, u32 khz)
>> {
>> return __clocksource_register_scale(cs, 1000, khz);
>> }
>> diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
>> index 9951575..686ff72 100644
>> --- a/kernel/time/clocksource.c
>> +++ b/kernel/time/clocksource.c
>> @@ -782,7 +782,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
>> * This *SHOULD NOT* be called directly! Please use the
>> * clocksource_register_hz() or clocksource_register_khz helper functions.
>> */
>> -int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
>> +void __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
>> {
>>
>> /* Initialize mult/shift and max_idle_ns */
>> @@ -794,7 +794,6 @@ int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
>> clocksource_enqueue_watchdog(cs);
>> clocksource_select();
>> mutex_unlock(&clocksource_mutex);
>> - return 0;
>> }
>> EXPORT_SYMBOL_GPL(__clocksource_register_scale);
>>
>> @@ -804,7 +803,7 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
>> * @cs: clocksource to be registered
>> *
>> */
>> -int clocksource_register(struct clocksource *cs)
>> +void clocksource_register(struct clocksource *cs)
>> {
>> /* calculate max adjustment for given mult/shift */
>> cs->maxadj = clocksource_max_adjustment(cs);
>> @@ -820,7 +819,6 @@ int clocksource_register(struct clocksource *cs)
>> clocksource_enqueue_watchdog(cs);
>> clocksource_select();
>> mutex_unlock(&clocksource_mutex);
>> - return 0;
>> }
>> EXPORT_SYMBOL(clocksource_register);
>>
>> diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
>> index 7a925ba..ae4c534 100644
>> --- a/kernel/time/jiffies.c
>> +++ b/kernel/time/jiffies.c
>> @@ -88,7 +88,8 @@ EXPORT_SYMBOL(jiffies);
>>
>> static int __init init_jiffies_clocksource(void)
>> {
>> - return clocksource_register(&clocksource_jiffies);
>> + clocksource_register(&clocksource_jiffies);
>> + return 0;
>> }
>>
>> core_initcall(init_jiffies_clocksource);
>>
>
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 2/2] clocksource: Make clocksource register functions void
2014-01-23 8:40 ` Daniel Lezcano
2014-01-23 9:01 ` Yijing Wang
@ 2014-02-05 20:39 ` Thomas Gleixner
1 sibling, 0 replies; 20+ messages in thread
From: Thomas Gleixner @ 2014-02-05 20:39 UTC (permalink / raw)
To: Daniel Lezcano
Cc: Yijing Wang, John Stultz, Sekhar Nori, Kevin Hilman, Russell King,
David Brown, Daniel Walker, Bryan Huntsman, Tony Lindgren,
Haavard Skinnemoen, Hans-Christian Egtvedt, Mike Frysinger,
Michal Simek, Ralf Baechle, Jonas Bonn, Benjamin Herrenschmidt,
Paul Mackerras, Jeff Dike, Richard Weinberger, Ingo Molnar,
H. Peter Anvin, x86, Kukjin Kim, Jim Cromie, Nicolas Ferre,
Barry Song, Tony Prisk, davinci-linux-open-source,
linux-arm-kernel, linux-arm-msm, linux-omap, uclinux-dist-devel,
microblaze-uclinux, linux-mips, linux, linuxppc-dev,
user-mode-linux-devel, user-mode-linux-user, linux-samsung-soc,
linux-kernel, Hanjun Guo
On Thu, 23 Jan 2014, Daniel Lezcano wrote:
> On 01/23/2014 08:12 AM, Yijing Wang wrote:
> > Currently, clocksource_register() and __clocksource_register_scale()
> > functions always return 0, it's pointless, make functions void.
> > And remove the dead code that check the clocksource_register_hz()
> > return value.
> >
> > Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>
> Well, do we really want to change all these files to not take care of a return
> value ? What about is we have to check it again later ?
>
> I would recommend to investigate __clocksource_register_scale and the
> underneath functions if there is not an error to be returned in the call stack
> somewhere which is ignored today.
>
> The same applies for clocksource_register.
There is really no point in making it fail. It's so low level that
anything more than a proper printk/BUG/WARN is overkill.
Thanks,
tglx
^ permalink raw reply [flat|nested] 20+ messages in thread