From: Alex Smith <alex.smith@imgtec.com>
To: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
John Crispin <john@phrozen.org>,
"Steven J. Hill" <Steven.Hill@imgtec.com>,
Aurelien Jarno <aurelien@aurel32.net>,
<linux-mips@linux-mips.org>, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Hongliang Tao <taohl@lemote.com>, Hua Yan <yanh@lemote.com>
Subject: Re: [PATCH V17 00/13] MIPS: Add Loongson-3 based machines support
Date: Wed, 12 Feb 2014 10:50:23 +0000 [thread overview]
Message-ID: <52FB51EF.2060707@imgtec.com> (raw)
In-Reply-To: <1391834342-8177-1-git-send-email-chenhc@lemote.com>
On 08/02/14 04:38, Huacai Chen wrote:
> This patchset is prepared for the next 3.15 release for Linux/MIPS.
> Loongson-3 is a multi-core MIPS family CPU, it is MIPS64R2 compatible
> and has the same IMP field (0x6300) as Loongson-2. These patches make
> Linux kernel support Loongson-3 CPU and Loongson-3 based computers
> (including Laptop, Mini-ITX, All-In-One PC, etc.)
>
> V1 -> V2:
> 1, Split the first patch to two patches, one is constant definition and
> the other is CPU probing, cache initializing, etc.
> 2, Remove Kconfig options in the first 9 patches and put all of them in
> the 10th patch.
> 3, Use "make savedefconfig" to generate the new default config file.
> 4, Rework serial port support to use PORT and PORT_M macros.
> 5, Fix some compile warnings.
>
> V2 -> V3:
> 1, Improve cache flushing code (use cpu_has_coherent_cache macro and
> remove #ifdef clauses).
> 2, Improve platform-specific code to correctly set driver's dma_mask/
> coherent_dma_mask so no longer need workarounds for each driver (
> SATA, graphics card, sound card, etc.)
> 3, Use PCI quirk to provide vgabios and loongson3_read_bios() go away.
> 4, Improve CPU hotplug code and split the poweroff failure related code
> to another patch (this issue affect all MIPS CPU, not only Loongson).
> 5, Some other small fixes.
>
> V3 -> V4:
> 1, Include swiotlb.h in radeon_ttm.c if SWIOTLB configured.
> 2, Remove "Reviewed-by" in patches which are added by mistake.
> 3, Sync the code to upstream.
>
> V4 -> V5:
> 1, Split the drm patch to three patches.
> 2, Use platform-specific pincfgs to replace old alsa quirks.
>
> V5 -> V6:
> 1, For better management, two non-Loongson-specific patches are sent
> independently.
> 2, Introduce cpu_has_coherent_cache feature and split cache flushing
> changes to a separate patch.
> 3, Remove PRID_IMP_LOONGSON3 and use PRID_IMP_LOONGSON2 since they are
> the same.
> 4, Don't define RTC_ALWAYS_BCD for Loongson-3 since BCD format can be
> checked by RTC_CONTROL at runtime.
> 5, Don't modify dma-default.c for Loongson since it is unnecessary.
> 6, Don't define SAREA_MAX since it is useless.
> 7, Increase the default boost of internal mic for Lemote A1004.
> 8, Fix a #ifdef issue in dma-coherence.h.
> 9, Some other small fixes.
>
> V6 -> V7:
> 1, Fix boot failure when NR_CPUS is more than present cpus.
> 2, Fix error messages after poweroff & reboot.
> 3, Update the default config file.
> 4, Sync the code to upstream.
>
> V7 -> V8:
> 1, Add WEAK_ORDERING/WEAK_REORDERING_BEYOND_LLSC for Loongson-3.
> 2, Fix a deadlock of cpu-hotplug.
> 3, Include swiotlb.h in arch-specific code to avoid driver modification.
> 4, Remove the patch "drm: Handle io prot correctly for MIPS" since it
> is already in upstream code.
> 5, Remove the patch "ALSA: HDA: Make hda sound card usable for Loongson"
> since it is already in upstream code.
> 6, Use LZMA compression and do some adjustment of config file to reduce
> kernel size.
>
> V8 -> V9:
> 1, Fix spurious IPI interrupt.
> 2, remove __dev* attributes since CONFIG_HOTPLUG is going away as an option.
> 3, Use dev_info() to print messages in fixup-loongson3.c.
> 4, Update the default config file.
> 5, Sync the code to upstream.
>
> V9 -> V10:
> 1, Rework "Introduce and use cpu_has_coherent_cache feature".
> 2, Handle the case that System BIOS doesn't contain a VGA BIOS.
> 3, Sync the code to upstream (mostly indentation adjustment).
>
> V10 -> V11:
> 1, Remove normal labels and useless nops in inline assembler.
> 2, Sync the code to upstream (Prepared for 3.12).
>
> V11 -> V12:
> 1, Delete __cpuinit usage;
> 2, Remove the third patch since it is contentious;
> 3, Sync the code to upstream (Prepared for 3.13).
>
> V12 -> V13:
> 1, Rework addrspace.h and spaces.h;
> 2, Move the modification of Platform from patch 1 to patch 12;
> 3, Sync the code to upstream (the mips-for-linux-next branch, for 3.13).
>
> V13 -> V14:
> 1, Avoid spurious interrupt from serial port;
> 2, Drop CONFIG_LOONGSON_BIGMEM and use CONFIG_SWIOTLB directly;
> 3, Sync the code to upstream (the mips-for-linux-next branch, for 3.14).
>
> V14 -> V15:
> 1, Fix duplicate ARCH_SPARSEMEM_ENABLE in Kconfig.
>
> V15 -> V16:
> 1, Fix all coding style errors and most of warnings;
> 2, Make dma address translation simple and elegant;
> 3, Fix potential bugs in swiotlb code;
> 4, Rename UEFI firmware interface to LEFI;
> 5, Remove 32-bit kernel support temporarily;
> 6, Some other small fixes (thanks to Aurelien Jarno).
>
> V16 -> V17:
> 1, Kconfig adjustment;
> 2, Make some functions static;
> 3, Capitalize macros in smp code;
> 4, Make dma-swiotlb.c more simple;
> 5, Some other small fixes (thanks to Aurelien Jarno and Alex Smith).
>
> Huacai Chen(13):
> MIPS: Loongson: Rename PRID_IMP_LOONGSON1 and PRID_IMP_LOONGSON2.
> MIPS: Loongson: Add basic Loongson-3 definition.
> MIPS: Loongson: Add basic Loongson-3 CPU support.
> MIPS: Loongson 3: Add Lemote-3A machtypes definition.
> MIPS: Loongson: Add UEFI-like firmware interface (LEFI) support.
> MIPS: Loongson 3: Add HT-linked PCI support.
> MIPS: Loongson 3: Add IRQ init and dispatch support.
> MIPS: Loongson 3: Add serial port support.
> MIPS: Loongson: Add swiotlb to support big memory (>4GB).
> MIPS: Loongson: Add Loongson-3 Kconfig options.
> MIPS: Loongson 3: Add Loongson-3 SMP support.
> MIPS: Loongson 3: Add CPU hotplug support.
> MIPS: Loongson: Add a Loongson-3 default config file.
>
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
Aside from the two Loongson 2 breakages, I think this is looking OK now,
so once you have fixed both of them you can add:
Tested-by: Alex Smith <alex.smith@imgtec.com>
Reviewed-by: Alex Smith <alex.smith@imgtec.com>
for the series.
Thanks,
Alex
> ---
> arch/mips/Kconfig | 29 ++-
> arch/mips/configs/loongson3_defconfig | 344 ++++++++++++++++
> arch/mips/include/asm/addrspace.h | 2 +
> arch/mips/include/asm/bootinfo.h | 24 +-
> arch/mips/include/asm/cpu-type.h | 4 +
> arch/mips/include/asm/cpu.h | 9 +-
> arch/mips/include/asm/dma-mapping.h | 5 +
> arch/mips/include/asm/mach-loongson/boot_param.h | 159 +++++++
> .../mips/include/asm/mach-loongson/dma-coherence.h | 22 +-
> arch/mips/include/asm/mach-loongson/irq.h | 44 ++
> arch/mips/include/asm/mach-loongson/loongson.h | 28 +-
> arch/mips/include/asm/mach-loongson/machine.h | 6 +
> arch/mips/include/asm/mach-loongson/pci.h | 5 +
> arch/mips/include/asm/mach-loongson/spaces.h | 13 +
> arch/mips/include/asm/module.h | 2 +
> arch/mips/include/asm/pgtable-bits.h | 9 +
> arch/mips/include/asm/smp.h | 1 +
> arch/mips/kernel/cpu-probe.c | 16 +-
> arch/mips/loongson/Kconfig | 47 +++
> arch/mips/loongson/Makefile | 6 +
> arch/mips/loongson/Platform | 1 +
> arch/mips/loongson/common/Makefile | 5 +
> arch/mips/loongson/common/dma-swiotlb.c | 137 ++++++
> arch/mips/loongson/common/env.c | 62 +++-
> arch/mips/loongson/common/init.c | 12 +-
> arch/mips/loongson/common/machtype.c | 4 +
> arch/mips/loongson/common/mem.c | 42 ++
> arch/mips/loongson/common/pci.c | 6 +-
> arch/mips/loongson/common/reset.c | 21 +
> arch/mips/loongson/common/serial.c | 26 +-
> arch/mips/loongson/common/setup.c | 8 +-
> arch/mips/loongson/common/uart_base.c | 9 +-
> arch/mips/loongson/loongson-3/Makefile | 6 +
> arch/mips/loongson/loongson-3/irq.c | 125 ++++++
> arch/mips/loongson/loongson-3/smp.c | 434 ++++++++++++++++++++
> arch/mips/loongson/loongson-3/smp.h | 29 ++
> arch/mips/mm/c-r4k.c | 59 +++
> arch/mips/mm/tlb-r4k.c | 5 +-
> arch/mips/mm/tlbex.c | 1 +
> arch/mips/pci/Makefile | 1 +
> arch/mips/pci/fixup-loongson3.c | 66 +++
> arch/mips/pci/ops-loongson3.c | 101 +++++
> 42 files changed, 1873 insertions(+), 62 deletions(-)
> create mode 100644 arch/mips/configs/loongson3_defconfig
> create mode 100644 arch/mips/include/asm/mach-loongson/boot_param.h
> create mode 100644 arch/mips/include/asm/mach-loongson/irq.h
> create mode 100644 arch/mips/include/asm/mach-loongson/spaces.h
> create mode 100644 arch/mips/loongson/common/dma-swiotlb.c
> create mode 100644 arch/mips/loongson/loongson-3/Makefile
> create mode 100644 arch/mips/loongson/loongson-3/irq.c
> create mode 100644 arch/mips/loongson/loongson-3/smp.c
> create mode 100644 arch/mips/loongson/loongson-3/smp.h
> create mode 100644 arch/mips/pci/fixup-loongson3.c
> create mode 100644 arch/mips/pci/ops-loongson3.c
> --
> 1.7.7.3
WARNING: multiple messages have this Message-ID (diff)
From: Alex Smith <alex.smith@imgtec.com>
To: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
John Crispin <john@phrozen.org>,
"Steven J. Hill" <Steven.Hill@imgtec.com>,
Aurelien Jarno <aurelien@aurel32.net>,
linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Hongliang Tao <taohl@lemote.com>, Hua Yan <yanh@lemote.com>
Subject: Re: [PATCH V17 00/13] MIPS: Add Loongson-3 based machines support
Date: Wed, 12 Feb 2014 10:50:23 +0000 [thread overview]
Message-ID: <52FB51EF.2060707@imgtec.com> (raw)
Message-ID: <20140212105023.F0vjcGooHtWyh3jsbi2STAcDsvVyHoKaS2vBOD4_ZWc@z> (raw)
In-Reply-To: <1391834342-8177-1-git-send-email-chenhc@lemote.com>
On 08/02/14 04:38, Huacai Chen wrote:
> This patchset is prepared for the next 3.15 release for Linux/MIPS.
> Loongson-3 is a multi-core MIPS family CPU, it is MIPS64R2 compatible
> and has the same IMP field (0x6300) as Loongson-2. These patches make
> Linux kernel support Loongson-3 CPU and Loongson-3 based computers
> (including Laptop, Mini-ITX, All-In-One PC, etc.)
>
> V1 -> V2:
> 1, Split the first patch to two patches, one is constant definition and
> the other is CPU probing, cache initializing, etc.
> 2, Remove Kconfig options in the first 9 patches and put all of them in
> the 10th patch.
> 3, Use "make savedefconfig" to generate the new default config file.
> 4, Rework serial port support to use PORT and PORT_M macros.
> 5, Fix some compile warnings.
>
> V2 -> V3:
> 1, Improve cache flushing code (use cpu_has_coherent_cache macro and
> remove #ifdef clauses).
> 2, Improve platform-specific code to correctly set driver's dma_mask/
> coherent_dma_mask so no longer need workarounds for each driver (
> SATA, graphics card, sound card, etc.)
> 3, Use PCI quirk to provide vgabios and loongson3_read_bios() go away.
> 4, Improve CPU hotplug code and split the poweroff failure related code
> to another patch (this issue affect all MIPS CPU, not only Loongson).
> 5, Some other small fixes.
>
> V3 -> V4:
> 1, Include swiotlb.h in radeon_ttm.c if SWIOTLB configured.
> 2, Remove "Reviewed-by" in patches which are added by mistake.
> 3, Sync the code to upstream.
>
> V4 -> V5:
> 1, Split the drm patch to three patches.
> 2, Use platform-specific pincfgs to replace old alsa quirks.
>
> V5 -> V6:
> 1, For better management, two non-Loongson-specific patches are sent
> independently.
> 2, Introduce cpu_has_coherent_cache feature and split cache flushing
> changes to a separate patch.
> 3, Remove PRID_IMP_LOONGSON3 and use PRID_IMP_LOONGSON2 since they are
> the same.
> 4, Don't define RTC_ALWAYS_BCD for Loongson-3 since BCD format can be
> checked by RTC_CONTROL at runtime.
> 5, Don't modify dma-default.c for Loongson since it is unnecessary.
> 6, Don't define SAREA_MAX since it is useless.
> 7, Increase the default boost of internal mic for Lemote A1004.
> 8, Fix a #ifdef issue in dma-coherence.h.
> 9, Some other small fixes.
>
> V6 -> V7:
> 1, Fix boot failure when NR_CPUS is more than present cpus.
> 2, Fix error messages after poweroff & reboot.
> 3, Update the default config file.
> 4, Sync the code to upstream.
>
> V7 -> V8:
> 1, Add WEAK_ORDERING/WEAK_REORDERING_BEYOND_LLSC for Loongson-3.
> 2, Fix a deadlock of cpu-hotplug.
> 3, Include swiotlb.h in arch-specific code to avoid driver modification.
> 4, Remove the patch "drm: Handle io prot correctly for MIPS" since it
> is already in upstream code.
> 5, Remove the patch "ALSA: HDA: Make hda sound card usable for Loongson"
> since it is already in upstream code.
> 6, Use LZMA compression and do some adjustment of config file to reduce
> kernel size.
>
> V8 -> V9:
> 1, Fix spurious IPI interrupt.
> 2, remove __dev* attributes since CONFIG_HOTPLUG is going away as an option.
> 3, Use dev_info() to print messages in fixup-loongson3.c.
> 4, Update the default config file.
> 5, Sync the code to upstream.
>
> V9 -> V10:
> 1, Rework "Introduce and use cpu_has_coherent_cache feature".
> 2, Handle the case that System BIOS doesn't contain a VGA BIOS.
> 3, Sync the code to upstream (mostly indentation adjustment).
>
> V10 -> V11:
> 1, Remove normal labels and useless nops in inline assembler.
> 2, Sync the code to upstream (Prepared for 3.12).
>
> V11 -> V12:
> 1, Delete __cpuinit usage;
> 2, Remove the third patch since it is contentious;
> 3, Sync the code to upstream (Prepared for 3.13).
>
> V12 -> V13:
> 1, Rework addrspace.h and spaces.h;
> 2, Move the modification of Platform from patch 1 to patch 12;
> 3, Sync the code to upstream (the mips-for-linux-next branch, for 3.13).
>
> V13 -> V14:
> 1, Avoid spurious interrupt from serial port;
> 2, Drop CONFIG_LOONGSON_BIGMEM and use CONFIG_SWIOTLB directly;
> 3, Sync the code to upstream (the mips-for-linux-next branch, for 3.14).
>
> V14 -> V15:
> 1, Fix duplicate ARCH_SPARSEMEM_ENABLE in Kconfig.
>
> V15 -> V16:
> 1, Fix all coding style errors and most of warnings;
> 2, Make dma address translation simple and elegant;
> 3, Fix potential bugs in swiotlb code;
> 4, Rename UEFI firmware interface to LEFI;
> 5, Remove 32-bit kernel support temporarily;
> 6, Some other small fixes (thanks to Aurelien Jarno).
>
> V16 -> V17:
> 1, Kconfig adjustment;
> 2, Make some functions static;
> 3, Capitalize macros in smp code;
> 4, Make dma-swiotlb.c more simple;
> 5, Some other small fixes (thanks to Aurelien Jarno and Alex Smith).
>
> Huacai Chen(13):
> MIPS: Loongson: Rename PRID_IMP_LOONGSON1 and PRID_IMP_LOONGSON2.
> MIPS: Loongson: Add basic Loongson-3 definition.
> MIPS: Loongson: Add basic Loongson-3 CPU support.
> MIPS: Loongson 3: Add Lemote-3A machtypes definition.
> MIPS: Loongson: Add UEFI-like firmware interface (LEFI) support.
> MIPS: Loongson 3: Add HT-linked PCI support.
> MIPS: Loongson 3: Add IRQ init and dispatch support.
> MIPS: Loongson 3: Add serial port support.
> MIPS: Loongson: Add swiotlb to support big memory (>4GB).
> MIPS: Loongson: Add Loongson-3 Kconfig options.
> MIPS: Loongson 3: Add Loongson-3 SMP support.
> MIPS: Loongson 3: Add CPU hotplug support.
> MIPS: Loongson: Add a Loongson-3 default config file.
>
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
Aside from the two Loongson 2 breakages, I think this is looking OK now,
so once you have fixed both of them you can add:
Tested-by: Alex Smith <alex.smith@imgtec.com>
Reviewed-by: Alex Smith <alex.smith@imgtec.com>
for the series.
Thanks,
Alex
> ---
> arch/mips/Kconfig | 29 ++-
> arch/mips/configs/loongson3_defconfig | 344 ++++++++++++++++
> arch/mips/include/asm/addrspace.h | 2 +
> arch/mips/include/asm/bootinfo.h | 24 +-
> arch/mips/include/asm/cpu-type.h | 4 +
> arch/mips/include/asm/cpu.h | 9 +-
> arch/mips/include/asm/dma-mapping.h | 5 +
> arch/mips/include/asm/mach-loongson/boot_param.h | 159 +++++++
> .../mips/include/asm/mach-loongson/dma-coherence.h | 22 +-
> arch/mips/include/asm/mach-loongson/irq.h | 44 ++
> arch/mips/include/asm/mach-loongson/loongson.h | 28 +-
> arch/mips/include/asm/mach-loongson/machine.h | 6 +
> arch/mips/include/asm/mach-loongson/pci.h | 5 +
> arch/mips/include/asm/mach-loongson/spaces.h | 13 +
> arch/mips/include/asm/module.h | 2 +
> arch/mips/include/asm/pgtable-bits.h | 9 +
> arch/mips/include/asm/smp.h | 1 +
> arch/mips/kernel/cpu-probe.c | 16 +-
> arch/mips/loongson/Kconfig | 47 +++
> arch/mips/loongson/Makefile | 6 +
> arch/mips/loongson/Platform | 1 +
> arch/mips/loongson/common/Makefile | 5 +
> arch/mips/loongson/common/dma-swiotlb.c | 137 ++++++
> arch/mips/loongson/common/env.c | 62 +++-
> arch/mips/loongson/common/init.c | 12 +-
> arch/mips/loongson/common/machtype.c | 4 +
> arch/mips/loongson/common/mem.c | 42 ++
> arch/mips/loongson/common/pci.c | 6 +-
> arch/mips/loongson/common/reset.c | 21 +
> arch/mips/loongson/common/serial.c | 26 +-
> arch/mips/loongson/common/setup.c | 8 +-
> arch/mips/loongson/common/uart_base.c | 9 +-
> arch/mips/loongson/loongson-3/Makefile | 6 +
> arch/mips/loongson/loongson-3/irq.c | 125 ++++++
> arch/mips/loongson/loongson-3/smp.c | 434 ++++++++++++++++++++
> arch/mips/loongson/loongson-3/smp.h | 29 ++
> arch/mips/mm/c-r4k.c | 59 +++
> arch/mips/mm/tlb-r4k.c | 5 +-
> arch/mips/mm/tlbex.c | 1 +
> arch/mips/pci/Makefile | 1 +
> arch/mips/pci/fixup-loongson3.c | 66 +++
> arch/mips/pci/ops-loongson3.c | 101 +++++
> 42 files changed, 1873 insertions(+), 62 deletions(-)
> create mode 100644 arch/mips/configs/loongson3_defconfig
> create mode 100644 arch/mips/include/asm/mach-loongson/boot_param.h
> create mode 100644 arch/mips/include/asm/mach-loongson/irq.h
> create mode 100644 arch/mips/include/asm/mach-loongson/spaces.h
> create mode 100644 arch/mips/loongson/common/dma-swiotlb.c
> create mode 100644 arch/mips/loongson/loongson-3/Makefile
> create mode 100644 arch/mips/loongson/loongson-3/irq.c
> create mode 100644 arch/mips/loongson/loongson-3/smp.c
> create mode 100644 arch/mips/loongson/loongson-3/smp.h
> create mode 100644 arch/mips/pci/fixup-loongson3.c
> create mode 100644 arch/mips/pci/ops-loongson3.c
> --
> 1.7.7.3
next prev parent reply other threads:[~2014-02-12 10:50 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-08 4:38 [PATCH V17 00/13] MIPS: Add Loongson-3 based machines support Huacai Chen
2014-02-08 4:38 ` [PATCH V17 01/13] MIPS: Loongson: Rename PRID_IMP_LOONGSON1 and PRID_IMP_LOONGSON2 Huacai Chen
2014-02-08 4:38 ` [PATCH V17 02/13] MIPS: Loongson: Add basic Loongson-3 definition Huacai Chen
2014-02-08 4:38 ` [PATCH V17 03/13] MIPS: Loongson: Add basic Loongson-3 CPU support Huacai Chen
2014-02-08 4:38 ` [PATCH V17 04/13] MIPS: Loongson 3: Add Lemote-3A machtypes definition Huacai Chen
2014-02-08 4:38 ` [PATCH V17 05/13] MIPS: Loongson: Add UEFI-like firmware interface (LEFI) support Huacai Chen
2014-02-11 10:54 ` Alex Smith
2014-02-11 10:54 ` Alex Smith
2014-02-08 4:38 ` [PATCH V17 06/13] MIPS: Loongson 3: Add HT-linked PCI support Huacai Chen
2014-02-08 4:38 ` [PATCH V17 07/13] MIPS: Loongson 3: Add IRQ init and dispatch support Huacai Chen
2014-02-10 17:22 ` Alex Smith
2014-02-10 17:22 ` Alex Smith
2014-02-11 3:43 ` "陈华才"
2014-02-08 4:38 ` [PATCH V17 08/13] MIPS: Loongson 3: Add serial port support Huacai Chen
2014-02-08 4:38 ` [PATCH V17 09/13] MIPS: Loongson: Add swiotlb to support big memory (>4GB) Huacai Chen
2014-02-08 4:38 ` [PATCH V17 10/13] MIPS: Loongson: Add Loongson-3 Kconfig options Huacai Chen
2014-02-08 4:39 ` [PATCH V17 11/13] MIPS: Loongson 3: Add Loongson-3 SMP support Huacai Chen
2014-02-08 4:39 ` [PATCH V17 12/13] MIPS: Loongson 3: Add CPU hotplug support Huacai Chen
2014-02-08 4:39 ` [PATCH V17 13/13] MIPS: Loongson: Add a Loongson-3 default config file Huacai Chen
2014-02-12 10:50 ` Alex Smith [this message]
2014-02-12 10:50 ` [PATCH V17 00/13] MIPS: Add Loongson-3 based machines support Alex Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52FB51EF.2060707@imgtec.com \
--to=alex.smith@imgtec.com \
--cc=Steven.Hill@imgtec.com \
--cc=aurelien@aurel32.net \
--cc=chenhc@lemote.com \
--cc=john@phrozen.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=taohl@lemote.com \
--cc=wuzhangjin@gmail.com \
--cc=yanh@lemote.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox