From: John Crispin <blogic@openwrt.org>
To: Sergey Ryazanov <ryazanov.s.a@gmail.com>,
Ralf Baechle <ralf@linux-mips.org>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Subject: Re: [PATCH v2 02/13] MIPS: ath25: add basic AR5312 SoC support
Date: Wed, 22 Oct 2014 01:48:34 +0200 [thread overview]
Message-ID: <5446F0D2.7050603@openwrt.org> (raw)
In-Reply-To: <1413932631-12866-3-git-send-email-ryazanov.s.a@gmail.com>
1 comment inline
On 22/10/2014 01:03, Sergey Ryazanov wrote:
> Add basic support for Atheros AR5312/AR2312 SoCs: registers
> definition file and initial setup code.
>
> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> ---
>
> Changes since v1: - rename MIPS machine ar231x -> ath25
>
> arch/mips/Kconfig | 1 +
> arch/mips/ath25/Kconfig | 4 +
> arch/mips/ath25/Makefile | 2 +
> arch/mips/ath25/ar5312.c | 134
> +++++++++++++++++ arch/mips/ath25/ar5312.h |
> 18 +++ arch/mips/ath25/board.c | 7 +
> arch/mips/ath25/prom.c | 5 +
> arch/mips/include/asm/mach-ath25/ar5312_regs.h | 190
> +++++++++++++++++++++++++ 8 files changed, 361 insertions(+) create
> mode 100644 arch/mips/ath25/Kconfig create mode 100644
> arch/mips/ath25/ar5312.c create mode 100644
> arch/mips/ath25/ar5312.h create mode 100644
> arch/mips/include/asm/mach-ath25/ar5312_regs.h
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index
> 54abb9a..baa1c5b 100644 --- a/arch/mips/Kconfig +++
> b/arch/mips/Kconfig @@ -848,6 +848,7 @@ config MIPS_PARAVIRT
> endchoice
>
> source "arch/mips/alchemy/Kconfig" +source
> "arch/mips/ath25/Kconfig" source "arch/mips/ath79/Kconfig" source
> "arch/mips/bcm47xx/Kconfig" source "arch/mips/bcm63xx/Kconfig" diff
> --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig new file
> mode 100644 index 0000000..cf933ea --- /dev/null +++
> b/arch/mips/ath25/Kconfig @@ -0,0 +1,4 @@ +config SOC_AR5312 + bool
> "Atheros AR5312/AR2312+ SoC support" + depends on ATH25 + default
> y diff --git a/arch/mips/ath25/Makefile b/arch/mips/ath25/Makefile
> index 9199fa1..3361619 100644 --- a/arch/mips/ath25/Makefile +++
> b/arch/mips/ath25/Makefile @@ -9,3 +9,5 @@ #
>
> obj-y += board.o prom.o devices.o + +obj-$(CONFIG_SOC_AR5312) +=
> ar5312.o diff --git a/arch/mips/ath25/ar5312.c
> b/arch/mips/ath25/ar5312.c new file mode 100644 index
> 0000000..80d7ed7 --- /dev/null +++ b/arch/mips/ath25/ar5312.c @@
> -0,0 +1,134 @@ +/* + * This file is subject to the terms and
> conditions of the GNU General Public + * License. See the file
> "COPYING" in the main directory of this archive + * for more
> details. + * + * Copyright (C) 2003 Atheros Communications, Inc.,
> All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + *
> Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C)
> 2006-2009 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2012
> Alexandros C. Couloumbis <alex@ozo.com> + */ + +/* + * Platform
> devices for Atheros AR5312 SoCs + */ + +#include <linux/init.h>
> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include
> <asm/bootinfo.h> +#include <asm/reboot.h> +#include <asm/time.h> +
> +#include <ar5312_regs.h> +#include <ath25.h> + +#include
> "devices.h" +#include "ar5312.h" + +static void ar5312_restart(char
> *command) +{ + /* reset the system */ + local_irq_disable(); +
> while (1) + ath25_write_reg(AR5312_RESET, AR5312_RESET_SYSTEM);
> +} + +/* + * This table is indexed by bits 5..4 of the CLOCKCTL1
> register + * to determine the predevisor value. + */ +static
> unsigned clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
> + +static unsigned __init ar5312_cpu_frequency(void) +{ + u32
> scratch, devid, clock_ctl1; + u32 predivide_mask, multiplier_mask,
> doubler_mask; + unsigned predivide_shift, multiplier_shift; +
> unsigned predivide_select, predivisor, multiplier; + + /* Trust the
> bootrom's idea of cpu frequency. */ + scratch =
> ath25_read_reg(AR5312_SCRATCH); + if (scratch) + return scratch;
> + + devid = ath25_read_reg(AR5312_REV); + devid = (devid &
> AR5312_REV_MAJ) >> AR5312_REV_MAJ_S; + if (devid ==
> AR5312_REV_MAJ_AR2313) { + predivide_mask =
> AR2313_CLOCKCTL1_PREDIVIDE_MASK; + predivide_shift =
> AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; + multiplier_mask =
> AR2313_CLOCKCTL1_MULTIPLIER_MASK; + multiplier_shift =
> AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; + doubler_mask =
> AR2313_CLOCKCTL1_DOUBLER_MASK; + } else { /* AR5312 and AR2312 */ +
> predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; +
> predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; +
> multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; +
> multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; +
> doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; + } + + /* + *
> Clocking is derived from a fixed 40MHz input clock. + * + *
> cpu_freq = input_clock * MULT (where MULT is PLL multiplier) + *
> sys_freq = cpu_freq / 4 (used for APB clock, serial, + *
> flash, Timer, Watchdog Timer) + * + * cnt_freq = cpu_freq / 2
> (use for CPU count/compare) + * + * So, for example, with a PLL
> multiplier of 5, we have + * + * cpu_freq = 200MHz + *
> sys_freq = 50MHz + * cnt_freq = 100MHz + * + * We compute the
> CPU frequency, based on PLL settings. + */ + + clock_ctl1 =
> ath25_read_reg(AR5312_CLOCKCTL1); + predivide_select = (clock_ctl1
> & predivide_mask) >> predivide_shift; + predivisor =
> clockctl1_predivide_table[predivide_select]; + multiplier =
> (clock_ctl1 & multiplier_mask) >> multiplier_shift; + + if
> (clock_ctl1 & doubler_mask) + multiplier <<= 1; + + return
> (40000000 / predivisor) * multiplier; +} + +static inline unsigned
> ar5312_sys_frequency(void) +{ + return ar5312_cpu_frequency() / 4;
> +} + +void __init ar5312_plat_time_init(void) +{ +
> mips_hpt_frequency = ar5312_cpu_frequency() / 2; +} + +void __init
> ar5312_plat_mem_setup(void) +{ + /* Clear any lingering AHB errors
> */ + ath25_read_reg(AR5312_PROCADDR); +
> ath25_read_reg(AR5312_DMAADDR); + ath25_write_reg(AR5312_WD_CTRL,
> AR5312_WD_CTRL_IGNORE_EXPIRATION); + + _machine_restart =
> ar5312_restart; +} + +void __init ar5312_prom_init(void) +{ + u32
> memsize, memcfg, bank0_ac, bank1_ac; + + /* Detect memory size */ +
> memcfg = ath25_read_reg(AR5312_MEM_CFG1); + bank0_ac =
> ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC0); + bank1_ac =
> ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC1); + memsize = (bank0_ac ?
> (1 << (bank0_ac + 1)) : 0) + + (bank1_ac ? (1 << (bank1_ac + 1))
> : 0); + memsize <<= 20; + add_memory_region(0, memsize,
> BOOT_MEM_RAM); +} + diff --git a/arch/mips/ath25/ar5312.h
> b/arch/mips/ath25/ar5312.h new file mode 100644 index
> 0000000..339b28e --- /dev/null +++ b/arch/mips/ath25/ar5312.h @@
> -0,0 +1,18 @@ +#ifndef __AR5312_H +#define __AR5312_H + +#ifdef
> CONFIG_SOC_AR5312 + +void ar5312_plat_time_init(void); +void
> ar5312_plat_mem_setup(void); +void ar5312_prom_init(void); +
> +#else + +static inline void ar5312_plat_time_init(void) {} +static
> inline void ar5312_plat_mem_setup(void) {} +static inline void
> ar5312_prom_init(void) {} + +#endif + +#endif /* __AR5312_H */ diff
> --git a/arch/mips/ath25/board.c b/arch/mips/ath25/board.c index
> cbc6d7b..80683e3 100644 --- a/arch/mips/ath25/board.c +++
> b/arch/mips/ath25/board.c @@ -16,6 +16,8 @@ #include
> <asm/bootinfo.h> #include <asm/time.h>
>
> +#include "ar5312.h" + static void ath25_halt(void) {
> local_irq_disable(); @@ -28,6 +30,9 @@ void __init
> plat_mem_setup(void) _machine_halt = ath25_halt; pm_power_off =
> ath25_halt;
>
> + if (is_ar5312()) + ar5312_plat_mem_setup(); +
if i am reading this correct then is_ar5312() can return true even if
CONFIG_SOC_AR5312 is not selected
how about
if (IS_ENABLED(CONFIG_SOC_AR5312) && is_ar5312())
pr_info("AR5312");
else if (IS_ENABLED(CONFIG_SOC_AR2315) && is_ar2315())
pr_info("AR2315");
else
panic("failed to init memory");
somewhere early in the code
> /* Disable data watchpoints */ write_c0_watchlo0(0); } @@ -38,6
> +43,8 @@ asmlinkage void plat_irq_dispatch(void)
>
> void __init plat_time_init(void) { + if (is_ar5312()) +
> ar5312_plat_time_init(); }
>
> unsigned int __cpuinit get_c0_compare_int(void) diff --git
> a/arch/mips/ath25/prom.c b/arch/mips/ath25/prom.c index
> edf82be..ec60b0f 100644 --- a/arch/mips/ath25/prom.c +++
> b/arch/mips/ath25/prom.c @@ -17,8 +17,13 @@ #include
> <linux/init.h> #include <asm/bootinfo.h>
>
> +#include "devices.h" +#include "ar5312.h" + void __init
> prom_init(void) { + if (is_ar5312()) + ar5312_prom_init(); }
>
> void __init prom_free_prom_memory(void) diff --git
> a/arch/mips/include/asm/mach-ath25/ar5312_regs.h
> b/arch/mips/include/asm/mach-ath25/ar5312_regs.h new file mode
> 100644 index 0000000..76856d8 --- /dev/null +++
> b/arch/mips/include/asm/mach-ath25/ar5312_regs.h @@ -0,0 +1,190 @@
> +/* + * This file is subject to the terms and conditions of the GNU
> General Public + * License. See the file "COPYING" in the main
> directory of this archive + * for more details. + * + * Copyright
> (C) 2003 Atheros Communications, Inc., All Rights Reserved. + *
> Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C)
> 2006 Felix Fietkau <nbd@openwrt.org> + */ + +#ifndef
> __ASM_MACH_ATH25_AR5312_REGS_H +#define
> __ASM_MACH_ATH25_AR5312_REGS_H + +/* + * Address Map + * + * The
> AR5312 supports 2 enet MACS, even though many reference boards
> only + * actually use 1 of them (i.e. Only MAC 0 is actually
> connected to an enet + * PHY or PHY switch. The AR2312 supports 1
> enet MAC. + */ +#define AR5312_WLAN0 0x18000000 +#define
> AR5312_WLAN1 0x18500000 +#define AR5312_ENET0 0x18100000 +#define
> AR5312_ENET1 0x18200000 +#define AR5312_SDRAMCTL 0x18300000
> +#define AR5312_FLASHCTL 0x18400000 +#define AR5312_APBBASE
> 0x1c000000 +#define AR5312_UART0 0x1c000000 /* UART MMR */
> +#define AR5312_FLASH 0x1e000000 + +/* + * Need these defines to
> determine true number of ethernet MACs + */ +#define
> AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define
> AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define
> AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ + +/*
> Reset/Timer Block Address Map */ +#define AR5312_RESETTMR
> (AR5312_APBBASE + 0x3000) +#define AR5312_TIMER (AR5312_RESETTMR
> + 0x0000) /* countdown timer */ +#define AR5312_WD_CTRL
> (AR5312_RESETTMR + 0x0008) /* watchdog cntrl */ +#define
> AR5312_WD_TIMER (AR5312_RESETTMR + 0x000c) /* watchdog timer */
> +#define AR5312_ISR (AR5312_RESETTMR + 0x0010) /* Intr Status Reg
> */ +#define AR5312_IMR (AR5312_RESETTMR + 0x0014) /* Intr Mask Reg
> */ +#define AR5312_RESET (AR5312_RESETTMR + 0x0020) +#define
> AR5312_CLOCKCTL1 (AR5312_RESETTMR + 0x0064) +#define AR5312_SCRATCH
> (AR5312_RESETTMR + 0x006c) +#define AR5312_PROCADDR
> (AR5312_RESETTMR + 0x0070) +#define AR5312_PROC1 (AR5312_RESETTMR
> + 0x0074) +#define AR5312_DMAADDR (AR5312_RESETTMR + 0x0078)
> +#define AR5312_DMA1 (AR5312_RESETTMR + 0x007c) +#define
> AR5312_ENABLE (AR5312_RESETTMR + 0x0080) /* interface enb */
> +#define AR5312_REV (AR5312_RESETTMR + 0x0090) /* revision */ +
> +/* AR5312_WD_CTRL register bit field definitions */ +#define
> AR5312_WD_CTRL_IGNORE_EXPIRATION 0x0000 +#define AR5312_WD_CTRL_NMI
> 0x0001 +#define AR5312_WD_CTRL_RESET 0x0002 + +/* AR5312_ISR
> register bit field definitions */ +#define AR5312_ISR_TIMER 0x0001
> +#define AR5312_ISR_AHBPROC 0x0002 +#define AR5312_ISR_AHBDMA
> 0x0004 +#define AR5312_ISR_GPIO 0x0008 +#define AR5312_ISR_UART0
> 0x0010 +#define AR5312_ISR_UART0DMA 0x0020 +#define AR5312_ISR_WD
> 0x0040 +#define AR5312_ISR_LOCAL 0x0080 + +/* AR5312_RESET register
> bit field definitions */ +#define AR5312_RESET_SYSTEM 0x00000001
> /* cold reset full system */ +#define AR5312_RESET_PROC 0x00000002
> /* cold reset MIPS core */ +#define AR5312_RESET_WLAN0 0x00000004
> /* cold reset WLAN MAC/BB */ +#define AR5312_RESET_EPHY0
> 0x00000008 /* cold reset ENET0 phy */ +#define AR5312_RESET_EPHY1
> 0x00000010 /* cold reset ENET1 phy */ +#define AR5312_RESET_ENET0
> 0x00000020 /* cold reset ENET0 MAC */ +#define AR5312_RESET_ENET1
> 0x00000040 /* cold reset ENET1 MAC */ +#define AR5312_RESET_UART0
> 0x00000100 /* cold reset UART0 */ +#define AR5312_RESET_WLAN1
> 0x00000200 /* cold reset WLAN MAC/BB */ +#define AR5312_RESET_APB
> 0x00000400 /* cold reset APB ar5312 */ +#define
> AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
> +#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset
> WLAN0 MAC */ +#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /*
> warm reset WLAN0 BB */ +#define AR5312_RESET_NMI 0x00010000 /*
> send an NMI to the CPU */ +#define AR5312_RESET_WARM_WLAN1_MAC
> 0x00020000 /* warm reset WLAN1 MAC */ +#define
> AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 BB */
> +#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
> +#define AR5312_RESET_WDOG 0x00100000 /* last reset was a wdt */
> + +#define AR5312_RESET_WMAC0_BITS (AR5312_RESET_WLAN0 |\ +
> AR5312_RESET_WARM_WLAN0_MAC |\ + AR5312_RESET_WARM_WLAN0_BB)
> + +#define AR5312_RESET_WMAC1_BITS (AR5312_RESET_WLAN1 |\ +
> AR5312_RESET_WARM_WLAN1_MAC |\ + AR5312_RESET_WARM_WLAN1_BB)
> + +/* AR5312_CLOCKCTL1 register bit field definitions */ +#define
> AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 +#define
> AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 +#define
> AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 +#define
> AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 +#define
> AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 + +/* Valid for AR5312
> and AR2312 */ +#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
> +#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 +#define
> AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 +#define
> AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 +#define
> AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 + +/* Valid for AR2313
> */ +#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 +#define
> AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 +#define
> AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 +#define
> AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 +#define
> AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 + +/* AR5312_ENABLE
> register bit field definitions */ +#define AR5312_ENABLE_WLAN0
> 0x0001 +#define AR5312_ENABLE_ENET0 0x0002 +#define
> AR5312_ENABLE_ENET1 0x0004 +#define
> AR5312_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART & WLAN1 PIOs */
> +#define AR5312_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
> +#define AR5312_ENABLE_WLAN1 (AR5312_ENABLE_UART_AND_WLAN1_PIO |\
> + AR5312_ENABLE_WLAN1_DMA) + +/* AR5312_REV register bit field
> definitions */ +#define AR5312_REV_WMAC_MAJ 0xf000 +#define
> AR5312_REV_WMAC_MAJ_S 12 +#define AR5312_REV_WMAC_MIN 0x0f00
> +#define AR5312_REV_WMAC_MIN_S 8 +#define AR5312_REV_MAJ 0x00f0
> +#define AR5312_REV_MAJ_S 4 +#define AR5312_REV_MIN 0x000f
> +#define AR5312_REV_MIN_S 0 +#define AR5312_REV_CHIP
> (AR5312_REV_MAJ|AR5312_REV_MIN) + +/* Major revision numbers, bits
> 7..4 of Revision ID register */ +#define AR5312_REV_MAJ_AR5312
> 0x4 +#define AR5312_REV_MAJ_AR2313 0x5 + +/* Minor revision
> numbers, bits 3..0 of Revision ID register */ +#define
> AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ +#define
> AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ + +/*
> AR5312_FLASHCTL register bit field definitions */ +#define
> AR5312_FLASHCTL_IDCY 0x0000000f /* Idle cycle turnaround time */
> +#define AR5312_FLASHCTL_IDCY_S 0 +#define AR5312_FLASHCTL_WST1
> 0x000003e0 /* Wait state 1 */ +#define AR5312_FLASHCTL_WST1_S 5
> +#define AR5312_FLASHCTL_RBLE 0x00000400 /* Read byte lane enable
> */ +#define AR5312_FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
> +#define AR5312_FLASHCTL_WST2_S 11 +#define AR5312_FLASHCTL_AC
> 0x00070000 /* Flash addr check (added) */ +#define
> AR5312_FLASHCTL_AC_S 16 +#define AR5312_FLASHCTL_AC_128K
> 0x00000000 +#define AR5312_FLASHCTL_AC_256K 0x00010000 +#define
> AR5312_FLASHCTL_AC_512K 0x00020000 +#define AR5312_FLASHCTL_AC_1M
> 0x00030000 +#define AR5312_FLASHCTL_AC_2M 0x00040000 +#define
> AR5312_FLASHCTL_AC_4M 0x00050000 +#define AR5312_FLASHCTL_AC_8M
> 0x00060000 +#define AR5312_FLASHCTL_AC_RES 0x00070000 /* 16MB is
> not supported */ +#define AR5312_FLASHCTL_E 0x00080000 /* Flash
> bank enable (added) */ +#define AR5312_FLASHCTL_BUSERR 0x01000000
> /* Bus transfer error flag */ +#define AR5312_FLASHCTL_WPERR
> 0x02000000 /* Write protect error flag */ +#define
> AR5312_FLASHCTL_WP 0x04000000 /* Write protect */ +#define
> AR5312_FLASHCTL_BM 0x08000000 /* Burst mode */ +#define
> AR5312_FLASHCTL_MW 0x30000000 /* Mem width */ +#define
> AR5312_FLASHCTL_MW8 0x00000000 /* Mem width x8 */ +#define
> AR5312_FLASHCTL_MW16 0x10000000 /* Mem width x16 */ +#define
> AR5312_FLASHCTL_MW32 0x20000000 /* Mem width x32 (not supp) */
> +#define AR5312_FLASHCTL_ATNR 0x00000000 /* Access == no retry */
> +#define AR5312_FLASHCTL_ATR 0x80000000 /* Access == retry every
> */ +#define AR5312_FLASHCTL_ATR4 0xc0000000 /* Access == retry
> every 4 */ + +/* ARM Flash Controller -- 3 flash banks with either
> x8 or x16 devices. */ +#define AR5312_FLASHCTL0 (AR5312_FLASHCTL +
> 0x00) +#define AR5312_FLASHCTL1 (AR5312_FLASHCTL + 0x04) +#define
> AR5312_FLASHCTL2 (AR5312_FLASHCTL + 0x08) + +/* ARM SDRAM
> Controller -- just enough to determine memory size */ +#define
> AR5312_MEM_CFG1 (AR5312_SDRAMCTL + 0x04) +#define
> AR5312_MEM_CFG1_AC0_M 0x00000700 /* bank 0: SDRAM addr check */
> +#define AR5312_MEM_CFG1_AC0_S 8 +#define AR5312_MEM_CFG1_AC1_M
> 0x00007000 /* bank 1: SDRAM addr check */ +#define
> AR5312_MEM_CFG1_AC1_S 12 + +#endif /*
> __ASM_MACH_ATH25_AR5312_REGS_H */
>
next prev parent reply other threads:[~2014-10-21 23:48 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 23:03 [PATCH v2 00/13] MIPS: support for the Atheros AR231X SoCs Sergey Ryazanov
2014-10-21 23:03 ` [PATCH v2 01/13] MIPS: ath25: add common parts Sergey Ryazanov
2014-10-21 23:36 ` John Crispin
2014-10-22 12:40 ` Sergey Ryazanov
2014-10-22 8:31 ` John Crispin
2014-10-22 13:06 ` Sergey Ryazanov
2014-10-22 13:09 ` John Crispin
2014-10-21 23:03 ` [PATCH v2 02/13] MIPS: ath25: add basic AR5312 SoC support Sergey Ryazanov
2014-10-21 23:48 ` John Crispin [this message]
2014-10-22 0:03 ` John Crispin
2014-10-22 14:11 ` Sergey Ryazanov
2014-10-21 23:03 ` [PATCH v2 03/13] MIPS: ath25: add basic AR2315 " Sergey Ryazanov
2014-10-21 23:03 ` [PATCH v2 04/13] MIPS: ath25: add interrupts handling routines Sergey Ryazanov
2014-10-22 8:26 ` John Crispin
2014-10-22 14:51 ` Sergey Ryazanov
2014-10-22 8:49 ` John Crispin
2014-10-21 23:03 ` [PATCH v2 05/13] MIPS: ath25: add early printk support Sergey Ryazanov
2014-10-21 23:03 ` [PATCH v2 06/13] MIPS: ath25: add UART support Sergey Ryazanov
2014-10-21 23:03 ` [PATCH v2 07/13] MIPS: ath25: add board configuration detection Sergey Ryazanov
2014-10-21 23:03 ` [PATCH v2 08/13] MIPS: ath25: add SoC type detection Sergey Ryazanov
2014-10-21 23:03 ` [PATCH v2 09/13] MIPS: ath25: register various chip devices Sergey Ryazanov
2014-10-22 8:39 ` John Crispin
2014-10-22 15:22 ` Sergey Ryazanov
2014-10-21 23:03 ` [PATCH v2 10/13] MIPS: ath25: add AR2315 PCI host controller driver Sergey Ryazanov
2014-10-22 8:47 ` John Crispin
2014-10-22 15:25 ` Sergey Ryazanov
2014-10-21 23:03 ` [PATCH v2 11/13] ath5k: revert AHB bus support removing Sergey Ryazanov
2014-10-22 12:18 ` Bob Copeland
2014-10-22 12:37 ` Sergey Ryazanov
2014-10-27 18:04 ` John W. Linville
2014-10-28 7:08 ` Sergey Ryazanov
2014-10-28 13:48 ` John W. Linville
2014-10-21 23:03 ` [PATCH v2 12/13] ath5k: update dependencies Sergey Ryazanov
2014-10-27 18:05 ` John W. Linville
2014-10-21 23:03 ` [PATCH v2 13/13] MIPS: ath25: add Wireless device support Sergey Ryazanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5446F0D2.7050603@openwrt.org \
--to=blogic@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=ryazanov.s.a@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox