Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
To: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	<david.daney@cavium.com>
Cc: <janne.huttunen@nokia.com>, <aaro.koskinen@nokia.com>,
	<ralf@linux-mips.org>, <linux-mips@linux-mips.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] MIPS: Octeon: Add Octeon III CN7XXX interface detection
Date: Wed, 3 Feb 2016 17:45:22 +0000	[thread overview]
Message-ID: <56B23CB2.5090805@imgtec.com> (raw)
In-Reply-To: <56B09528.1030902@cogentembedded.com>

Hi,

Thanks for the review. Comments below.

On 02/02/16 11:38, Sergei Shtylyov wrote:
> Hello.
>
> On 2/2/2016 2:25 PM, Zubair Lutfullah Kakakhel wrote:
>
>> Add basic CN7XXX interface detection.
>>
>> This allows the kernel to boot with ethernet working as it initializes
>> the ethernet ports with SGMII instead of defaulting to RGMII routines.
>>
>> Tested on the utm8 from Rhino Labs with a CN7130.
>>
>> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
>> ---
>>   arch/mips/cavium-octeon/executive/cvmx-helper.c | 41 +++++++++++++++++++++++++
>>   1 file changed, 41 insertions(+)
>>
>> diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
>> index 376701f..1a28009 100644
>> --- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
>> +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
> [...]
>> @@ -260,6 +262,39 @@ static cvmx_helper_interface_mode_t __cvmx_get_mode_octeon2(int interface)
>>   }
>>
>>   /**
>> + * @INTERNAL
>> + * Return interface mode for CN7XXX.
>> + */
>> +static cvmx_helper_interface_mode_t __cvmx_get_mode_cn7xxx(int interface)
>
>     Not *unsigned*?

The rest of the instances in the file don't have unsigned.

Probably because it is an enum..

>
>> +{
>> +    union cvmx_gmxx_inf_mode mode;
>> +
>> +    mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
>> +
>> +    if (interface < 2) {        /* SGMII/QSGMII/XAUI */
>> +        switch (mode.cn68xx.mode) {
>> +        case 0:
>> +            return CVMX_HELPER_INTERFACE_MODE_DISABLED;
>> +        case 1:
>> +        case 2:
>> +            return CVMX_HELPER_INTERFACE_MODE_SGMII;
>> +        case 3:
>> +            return CVMX_HELPER_INTERFACE_MODE_XAUI;
>> +        default:
>> +            return CVMX_HELPER_INTERFACE_MODE_SGMII;
>> +        }
>> +    } else if (interface == 2)    /* NPI */
>> +        return CVMX_HELPER_INTERFACE_MODE_NPI;
>> +    else if (interface == 3)    /* LOOP */
>> +        return CVMX_HELPER_INTERFACE_MODE_LOOP;
>> +    else if (interface == 4)    /* RGMII (AGL) */
>> +        return CVMX_HELPER_INTERFACE_MODE_RGMII;
>
>     This is asking to be a *switch* statement.

Ask and you shall receive

(⌐▀͡ ̯ʖ▀)

Thanks
ZubairLK

>
>> +
>> +    return CVMX_HELPER_INTERFACE_MODE_DISABLED;
>> +}
>> +
>> +
>> +/**
>>    * Get the operating mode of an interface. Depending on the Octeon
>>    * chip and configuration, this function returns an enumeration
>>    * of the type of packet I/O supported by an interface.
> [...]
>
> MBR, Sergei
>
>

WARNING: multiple messages have this Message-ID (diff)
From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
To: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	david.daney@cavium.com
Cc: janne.huttunen@nokia.com, aaro.koskinen@nokia.com,
	ralf@linux-mips.org, linux-mips@linux-mips.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] MIPS: Octeon: Add Octeon III CN7XXX interface detection
Date: Wed, 3 Feb 2016 17:45:22 +0000	[thread overview]
Message-ID: <56B23CB2.5090805@imgtec.com> (raw)
Message-ID: <20160203174522.jDGO_LJL9yHOtgLBlSNFsKNgr2WNLTemk3VHdMJsDUU@z> (raw)
In-Reply-To: <56B09528.1030902@cogentembedded.com>

Hi,

Thanks for the review. Comments below.

On 02/02/16 11:38, Sergei Shtylyov wrote:
> Hello.
>
> On 2/2/2016 2:25 PM, Zubair Lutfullah Kakakhel wrote:
>
>> Add basic CN7XXX interface detection.
>>
>> This allows the kernel to boot with ethernet working as it initializes
>> the ethernet ports with SGMII instead of defaulting to RGMII routines.
>>
>> Tested on the utm8 from Rhino Labs with a CN7130.
>>
>> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
>> ---
>>   arch/mips/cavium-octeon/executive/cvmx-helper.c | 41 +++++++++++++++++++++++++
>>   1 file changed, 41 insertions(+)
>>
>> diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
>> index 376701f..1a28009 100644
>> --- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
>> +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
> [...]
>> @@ -260,6 +262,39 @@ static cvmx_helper_interface_mode_t __cvmx_get_mode_octeon2(int interface)
>>   }
>>
>>   /**
>> + * @INTERNAL
>> + * Return interface mode for CN7XXX.
>> + */
>> +static cvmx_helper_interface_mode_t __cvmx_get_mode_cn7xxx(int interface)
>
>     Not *unsigned*?

The rest of the instances in the file don't have unsigned.

Probably because it is an enum..

>
>> +{
>> +    union cvmx_gmxx_inf_mode mode;
>> +
>> +    mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
>> +
>> +    if (interface < 2) {        /* SGMII/QSGMII/XAUI */
>> +        switch (mode.cn68xx.mode) {
>> +        case 0:
>> +            return CVMX_HELPER_INTERFACE_MODE_DISABLED;
>> +        case 1:
>> +        case 2:
>> +            return CVMX_HELPER_INTERFACE_MODE_SGMII;
>> +        case 3:
>> +            return CVMX_HELPER_INTERFACE_MODE_XAUI;
>> +        default:
>> +            return CVMX_HELPER_INTERFACE_MODE_SGMII;
>> +        }
>> +    } else if (interface == 2)    /* NPI */
>> +        return CVMX_HELPER_INTERFACE_MODE_NPI;
>> +    else if (interface == 3)    /* LOOP */
>> +        return CVMX_HELPER_INTERFACE_MODE_LOOP;
>> +    else if (interface == 4)    /* RGMII (AGL) */
>> +        return CVMX_HELPER_INTERFACE_MODE_RGMII;
>
>     This is asking to be a *switch* statement.

Ask and you shall receive

(⌐▀͡ ̯ʖ▀)

Thanks
ZubairLK

>
>> +
>> +    return CVMX_HELPER_INTERFACE_MODE_DISABLED;
>> +}
>> +
>> +
>> +/**
>>    * Get the operating mode of an interface. Depending on the Octeon
>>    * chip and configuration, this function returns an enumeration
>>    * of the type of packet I/O supported by an interface.
> [...]
>
> MBR, Sergei
>
>

  reply	other threads:[~2016-02-03 17:45 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-02 11:25 [PATCH] MIPS: Octeon: Add Octeon III CN7XXX interface detection Zubair Lutfullah Kakakhel
2016-02-02 11:25 ` Zubair Lutfullah Kakakhel
2016-02-02 11:38 ` Sergei Shtylyov
2016-02-03 17:45   ` Zubair Lutfullah Kakakhel [this message]
2016-02-03 17:45     ` Zubair Lutfullah Kakakhel
2016-02-03 17:52     ` Sergei Shtylyov
2016-02-03 17:57       ` David Daney
2016-02-03 17:57         ` David Daney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56B23CB2.5090805@imgtec.com \
    --to=zubair.kakakhel@imgtec.com \
    --cc=aaro.koskinen@nokia.com \
    --cc=david.daney@cavium.com \
    --cc=janne.huttunen@nokia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox