Re: [PATCH v2 1/4] dt-bindings: clock: mediatek,mtmips-sysc: Adapt compatible for MT7688 boards

[Krzysztof Kozlowski <krzk@kernel.org>]

On 17/06/2025 12:30, Ezra Buehler wrote:
> From: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
> 
> As the MT7628 and MT7688 are identical in most respects, mt7628a.dtsi is
> used for both SoCs. To prevent "Kernel panic - not syncing: unable to
> get CPU clock, err=-2" and allow an MT7688-based board to boot, the
> following must be allowed:
> 
>     compatible = "ralink,mt7628-sysc", "ralink,mt7688-sysc", "syscon";
> 
> Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
> ---
>  .../bindings/clock/mediatek,mtmips-sysc.yaml  | 29 +++++++++++--------
>  1 file changed, 17 insertions(+), 12 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
> index 83c1803ffd16..550807301fc5 100644
> --- a/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
> +++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
> @@ -26,18 +26,23 @@ description: |
>  
>  properties:
>    compatible:
> -    items:
> -      - enum:
> -          - ralink,mt7620-sysc
> -          - ralink,mt7628-sysc
> -          - ralink,mt7688-sysc
> -          - ralink,rt2880-sysc
> -          - ralink,rt3050-sysc
> -          - ralink,rt3052-sysc
> -          - ralink,rt3352-sysc
> -          - ralink,rt3883-sysc
> -          - ralink,rt5350-sysc
> -      - const: syscon
> +    oneOf:
> +      - items:
> +          - enum:
> +              - ralink,mt7620-sysc
> +              - ralink,mt7628-sysc

It's here already, so this must be dropped.


Best regards,
Krzysztof