hello! can you help me for compiling the linux kernel?

hello! can you help me for compiling the linux kernel?

[jack_lu]

Dear Sir,
　　hello! can you help me for compiling the linux kernel?
　　Linux version is linux-2.6.21.5.
　　CPU:mips
　　Cross-compilation tools is eldk and openwrt file packages.
　　Errors are the followings.
　　init/built-in.o: In function `init':
　　init/main.c:833: undefined reference to `opipmux_gel_init'
　　init/main.c:833: relocation truncated to fit: R_MIPS_26 against `opipmux_gel_init'
　　init/main.c:835: undefined reference to `ip_auto_config'
　　init/main.c:835: relocation truncated to fit: R_MIPS_26 against `ip_auto_config'
　　init/built-in.o: In function `start_kernel':
　　init/main.c:525: undefined reference to `setup_prom_printf'
　　init/main.c:525: relocation truncated to fit: R_MIPS_26 against `setup_prom_printf'
　　init/main.c:527: undefined reference to `prom_printf'
　　init/main.c:527: relocation truncated to fit: R_MIPS_26 against `prom_printf'
　　init/main.c:530: undefined reference to `prom_printf'
　　init/main.c:530: relocation truncated to fit: R_MIPS_26 against `prom_printf'
　　arch/mips/kernel/built-in.o: In function `test_setdata':
　　arch/mips/kernel/syscall.c:461: undefined reference to `set_ipmux_el_tx_buf_data'
　　arch/mips/kernel/syscall.c:461: relocation truncated to fit: R_MIPS_26 against `set_ipmux_el_tx_buf_data'
　　arch/mips/kernel/built-in.o: In function `test_getdata':
　　arch/mips/kernel/syscall.c:453: undefined reference to `get_ipmux_el_rx_buf_data'
　　arch/mips/kernel/syscall.c:453: relocation truncated to fit: R_MIPS_26 against `get_ipmux_el_rx_buf_data'
　　arch/mips/kernel/built-in.o: In function `test_waitinterrupt':
　　arch/mips/kernel/syscall.c:446: undefined reference to `wait_for_host_test_interrupt'
　　arch/mips/kernel/syscall.c:446: relocation truncated to fit: R_MIPS_26 against `wait_for_host_test_interrupt'
　　kernel/built-in.o: In function `free_module':
　　kernel/module.c:1231: undefined reference to `kfree1'
　　kernel/module.c:1231: relocation truncated to fit: R_MIPS_26 against `kfree1'
　　drivers/built-in.o: In function `snapshot_map':
　　drivers/md/dm-snap.c:900: undefined reference to `__cmpdi2'
　　drivers/md/dm-snap.c:900: relocation truncated to fit: R_MIPS_26 against `__cmpdi2'
　　make: *** [.tmp_vmlinux1] Error 1
　　make: *** No rule to make target `../vmlinux', needed by `piggy.lzma'.  Stop.
　　copyed to ../wrt_uImage
　　cp: cannot stat `uImageLzma': No such file or directory
　　ls: cannot access ../wrt_uImage: No such file or directory
　　===============================================================
　　    output files:                           
　　         wrt_uImage : the kernel image      
　　
　　
　　Thanks &Best Wishes,
　　Jack_Lu(鲁红刚)
   益满颖贸易（上海）有限公司
   上海市愚园路168号环球大厦A座2101室
   电话：+86 21 62495328/29/30/31 分机：820
   传真：+86 21 62490538
   MSN: luhongang@163.com

　　


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

hello! can you help me for compiling the linux kernel?

[jack_lu]

Dear Sir,
　　hello! can you help me for compiling the linux kernel?
　　Linux version is linux-2.6.21.5.
　　CPU:mips
　　Cross-compilation tools is eldk and openwrt file packages.
　　Errors are the followings.
　　init/built-in.o: In function `init':
　　init/main.c:833: undefined reference to `opipmux_gel_init'
　　init/main.c:833: relocation truncated to fit: R_MIPS_26 against `opipmux_gel_init'
　　init/main.c:835: undefined reference to `ip_auto_config'
　　init/main.c:835: relocation truncated to fit: R_MIPS_26 against `ip_auto_config'
　　init/built-in.o: In function `start_kernel':
　　init/main.c:525: undefined reference to `setup_prom_printf'
　　init/main.c:525: relocation truncated to fit: R_MIPS_26 against `setup_prom_printf'
　　init/main.c:527: undefined reference to `prom_printf'
　　init/main.c:527: relocation truncated to fit: R_MIPS_26 against `prom_printf'
　　init/main.c:530: undefined reference to `prom_printf'
　　init/main.c:530: relocation truncated to fit: R_MIPS_26 against `prom_printf'
　　arch/mips/kernel/built-in.o: In function `test_setdata':
　　arch/mips/kernel/syscall.c:461: undefined reference to `set_ipmux_el_tx_buf_data'
　　arch/mips/kernel/syscall.c:461: relocation truncated to fit: R_MIPS_26 against `set_ipmux_el_tx_buf_data'
　　arch/mips/kernel/built-in.o: In function `test_getdata':
　　arch/mips/kernel/syscall.c:453: undefined reference to `get_ipmux_el_rx_buf_data'
　　arch/mips/kernel/syscall.c:453: relocation truncated to fit: R_MIPS_26 against `get_ipmux_el_rx_buf_data'
　　arch/mips/kernel/built-in.o: In function `test_waitinterrupt':
　　arch/mips/kernel/syscall.c:446: undefined reference to `wait_for_host_test_interrupt'
　　arch/mips/kernel/syscall.c:446: relocation truncated to fit: R_MIPS_26 against `wait_for_host_test_interrupt'
　　kernel/built-in.o: In function `free_module':
　　kernel/module.c:1231: undefined reference to `kfree1'
　　kernel/module.c:1231: relocation truncated to fit: R_MIPS_26 against `kfree1'
　　drivers/built-in.o: In function `snapshot_map':
　　drivers/md/dm-snap.c:900: undefined reference to `__cmpdi2'
　　drivers/md/dm-snap.c:900: relocation truncated to fit: R_MIPS_26 against `__cmpdi2'
　　make: *** [.tmp_vmlinux1] Error 1
　　make: *** No rule to make target `../vmlinux', needed by `piggy.lzma'.  Stop.
　　copyed to ../wrt_uImage
　　cp: cannot stat `uImageLzma': No such file or directory
　　ls: cannot access ../wrt_uImage: No such file or directory
　　===============================================================
　　    output files:                           
　　         wrt_uImage : the kernel image      
　　
　　
　　Thanks &Best Wishes,
　　Jack_Lu(鲁红刚)
   益满颖贸易（上海）有限公司
   上海市愚园路168号环球大厦A座2101室
   电话：+86 21 62495328/29/30/31 分机：820
   传真：+86 21 62490538
   MSN: luhongang@163.com

　　


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

Re: hello! can you help me for compiling the linux kernel?

[Wu Zhangjin]

On Tue, 2009-12-01 at 11:52 +0800, jack_lu wrote:
> Dear Sir,
> 　　hello! can you help me for compiling the linux kernel?
> 　　Linux version is linux-2.6.21.5.
> 　　CPU:mips
> 　　Cross-compilation tools is eldk and openwrt file packages.

Hello,

Which board are you using? and did you try the corresponding defconfig
file under arch/mips/configs/.

Regards,
	Wu zhangjin

> 　　Errors are the followings.
> 　　init/built-in.o: In function `init':
> 　　init/main.c:833: undefined reference to `opipmux_gel_init'
> 　　init/main.c:833: relocation truncated to fit: R_MIPS_26 against `opipmux_gel_init'
> 　　init/main.c:835: undefined reference to `ip_auto_config'
> 　　init/main.c:835: relocation truncated to fit: R_MIPS_26 against `ip_auto_config'
> 　　init/built-in.o: In function `start_kernel':
> 　　init/main.c:525: undefined reference to `setup_prom_printf'
> 　　init/main.c:525: relocation truncated to fit: R_MIPS_26 against `setup_prom_printf'
> 　　init/main.c:527: undefined reference to `prom_printf'
> 　　init/main.c:527: relocation truncated to fit: R_MIPS_26 against `prom_printf'
> 　　init/main.c:530: undefined reference to `prom_printf'
> 　　init/main.c:530: relocation truncated to fit: R_MIPS_26 against `prom_printf'
> 　　arch/mips/kernel/built-in.o: In function `test_setdata':
> 　　arch/mips/kernel/syscall.c:461: undefined reference to `set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/syscall.c:461: relocation truncated to fit: R_MIPS_26 against `set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_getdata':
> 　　arch/mips/kernel/syscall.c:453: undefined reference to `get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/syscall.c:453: relocation truncated to fit: R_MIPS_26 against `get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_waitinterrupt':
> 　　arch/mips/kernel/syscall.c:446: undefined reference to `wait_for_host_test_interrupt'
> 　　arch/mips/kernel/syscall.c:446: relocation truncated to fit: R_MIPS_26 against `wait_for_host_test_interrupt'
> 　　kernel/built-in.o: In function `free_module':
> 　　kernel/module.c:1231: undefined reference to `kfree1'
> 　　kernel/module.c:1231: relocation truncated to fit: R_MIPS_26 against `kfree1'
> 　　drivers/built-in.o: In function `snapshot_map':
> 　　drivers/md/dm-snap.c:900: undefined reference to `__cmpdi2'
> 　　drivers/md/dm-snap.c:900: relocation truncated to fit: R_MIPS_26 against `__cmpdi2'
> 　　make: *** [.tmp_vmlinux1] Error 1
> 　　make: *** No rule to make target `../vmlinux', needed by `piggy.lzma'.  Stop.
> 　　copyed to ../wrt_uImage
> 　　cp: cannot stat `uImageLzma': No such file or directory
> 　　ls: cannot access ../wrt_uImage: No such file or directory
> 　　===============================================================
> 　　    output files:                           
> 　　         wrt_uImage : the kernel image      
> 　　
> 　　
> 　　Thanks &Best Wishes,
> 　　Jack_Lu(鲁红刚)
>    益满颖贸易（上海）有限公司
>    上海市愚园路168号环球大厦A座2101室
>    电话：+86 21 62495328/29/30/31 分机：820
>    传真：+86 21 62490538
>    MSN: luhongang@163.com
> 
> 　　
> 
> 

答复: hello! can you help me for compiling the linux kernel?

[jack_lu]

Dear Wu，
     The demo board is ONU. It is used in EPON systerm.
     I copy the cross-compilation to /opt,then modify CROSS_COMPILE
=/opt/openwrt/kamikaze_7.09/staging_dir_mips/bin/mips-linux-uclibc- in
mklzma.sh and Makefile.
     Then make config,and compile kernel.
     Use make command or sh mklzma.sh command can compile kernel.the same
errors come when excute one of two commands

Best Wishes
Jack Lu


-----邮件原件-----
发件人: Wu Zhangjin [mailto:wuzhangjin@gmail.com] 
发送时间: 2009年12月1日 13:14
收件人: jack_lu
抄送: linux-mips@linux-mips.org
主题: Re: hello! can you help me for compiling the linux kernel?

On Tue, 2009-12-01 at 11:52 +0800, jack_lu wrote:
> Dear Sir,
> 　　hello! can you help me for compiling the linux kernel?
> 　　Linux version is linux-2.6.21.5.
> 　　CPU:mips
> 　　Cross-compilation tools is eldk and openwrt file packages.

Hello,

Which board are you using? and did you try the corresponding defconfig
file under arch/mips/configs/.

Regards,
	Wu zhangjin

> 　　Errors are the followings.
> 　　init/built-in.o: In function `init':
> 　　init/main.c:833: undefined reference to `opipmux_gel_init'
> 　　init/main.c:833: relocation truncated to fit: R_MIPS_26 against
`opipmux_gel_init'
> 　　init/main.c:835: undefined reference to `ip_auto_config'
> 　　init/main.c:835: relocation truncated to fit: R_MIPS_26 against
`ip_auto_config'
> 　　init/built-in.o: In function `start_kernel':
> 　　init/main.c:525: undefined reference to `setup_prom_printf'
> 　　init/main.c:525: relocation truncated to fit: R_MIPS_26 against
`setup_prom_printf'
> 　　init/main.c:527: undefined reference to `prom_printf'
> 　　init/main.c:527: relocation truncated to fit: R_MIPS_26 against
`prom_printf'
> 　　init/main.c:530: undefined reference to `prom_printf'
> 　　init/main.c:530: relocation truncated to fit: R_MIPS_26 against
`prom_printf'
> 　　arch/mips/kernel/built-in.o: In function `test_setdata':
> 　　arch/mips/kernel/syscall.c:461: undefined reference to
`set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/syscall.c:461: relocation truncated to fit: R_MIPS_26
against `set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_getdata':
> 　　arch/mips/kernel/syscall.c:453: undefined reference to
`get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/syscall.c:453: relocation truncated to fit: R_MIPS_26
against `get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_waitinterrupt':
> 　　arch/mips/kernel/syscall.c:446: undefined reference to
`wait_for_host_test_interrupt'
> 　　arch/mips/kernel/syscall.c:446: relocation truncated to fit: R_MIPS_26
against `wait_for_host_test_interrupt'
> 　　kernel/built-in.o: In function `free_module':
> 　　kernel/module.c:1231: undefined reference to `kfree1'
> 　　kernel/module.c:1231: relocation truncated to fit: R_MIPS_26 against
`kfree1'
> 　　drivers/built-in.o: In function `snapshot_map':
> 　　drivers/md/dm-snap.c:900: undefined reference to `__cmpdi2'
> 　　drivers/md/dm-snap.c:900: relocation truncated to fit: R_MIPS_26
against `__cmpdi2'
> 　　make: *** [.tmp_vmlinux1] Error 1
> 　　make: *** No rule to make target `../vmlinux', needed by `piggy.lzma'.
Stop.
> 　　copyed to ../wrt_uImage
> 　　cp: cannot stat `uImageLzma': No such file or directory
> 　　ls: cannot access ../wrt_uImage: No such file or directory
> 　　===============================================================
> 　　    output files:                           
> 　　         wrt_uImage : the kernel image      
> 　　
> 　　
> 　　Thanks &Best Wishes,
> 　　Jack_Lu(鲁红刚)
>    益满颖贸易（上海）有限公司
>    上海市愚园路168号环球大厦A座2101室
>    电话：+86 21 62495328/29/30/31 分机：820
>    传真：+86 21 62490538
>    MSN: luhongang@163.com
> 
> 　　
> 
> 



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

答复: hello! can you help me for compiling the linux kernel?

[jack_lu]

Dear Wu，
     The demo board is ONU. It is used in EPON systerm.
     I copy the cross-compilation to /opt,then modify CROSS_COMPILE
=/opt/openwrt/kamikaze_7.09/staging_dir_mips/bin/mips-linux-uclibc- in
mklzma.sh and Makefile.
     Then make config,and compile kernel.
     Use make command or sh mklzma.sh command can compile kernel.the same
errors come when excute one of two commands

Best Wishes
Jack Lu


-----邮件原件-----
发件人: Wu Zhangjin [mailto:wuzhangjin@gmail.com] 
发送时间: 2009年12月1日 13:14
收件人: jack_lu
抄送: linux-mips@linux-mips.org
主题: Re: hello! can you help me for compiling the linux kernel?

On Tue, 2009-12-01 at 11:52 +0800, jack_lu wrote:
> Dear Sir,
> 　　hello! can you help me for compiling the linux kernel?
> 　　Linux version is linux-2.6.21.5.
> 　　CPU:mips
> 　　Cross-compilation tools is eldk and openwrt file packages.

Hello,

Which board are you using? and did you try the corresponding defconfig
file under arch/mips/configs/.

Regards,
	Wu zhangjin

> 　　Errors are the followings.
> 　　init/built-in.o: In function `init':
> 　　init/main.c:833: undefined reference to `opipmux_gel_init'
> 　　init/main.c:833: relocation truncated to fit: R_MIPS_26 against
`opipmux_gel_init'
> 　　init/main.c:835: undefined reference to `ip_auto_config'
> 　　init/main.c:835: relocation truncated to fit: R_MIPS_26 against
`ip_auto_config'
> 　　init/built-in.o: In function `start_kernel':
> 　　init/main.c:525: undefined reference to `setup_prom_printf'
> 　　init/main.c:525: relocation truncated to fit: R_MIPS_26 against
`setup_prom_printf'
> 　　init/main.c:527: undefined reference to `prom_printf'
> 　　init/main.c:527: relocation truncated to fit: R_MIPS_26 against
`prom_printf'
> 　　init/main.c:530: undefined reference to `prom_printf'
> 　　init/main.c:530: relocation truncated to fit: R_MIPS_26 against
`prom_printf'
> 　　arch/mips/kernel/built-in.o: In function `test_setdata':
> 　　arch/mips/kernel/syscall.c:461: undefined reference to
`set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/syscall.c:461: relocation truncated to fit: R_MIPS_26
against `set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_getdata':
> 　　arch/mips/kernel/syscall.c:453: undefined reference to
`get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/syscall.c:453: relocation truncated to fit: R_MIPS_26
against `get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_waitinterrupt':
> 　　arch/mips/kernel/syscall.c:446: undefined reference to
`wait_for_host_test_interrupt'
> 　　arch/mips/kernel/syscall.c:446: relocation truncated to fit: R_MIPS_26
against `wait_for_host_test_interrupt'
> 　　kernel/built-in.o: In function `free_module':
> 　　kernel/module.c:1231: undefined reference to `kfree1'
> 　　kernel/module.c:1231: relocation truncated to fit: R_MIPS_26 against
`kfree1'
> 　　drivers/built-in.o: In function `snapshot_map':
> 　　drivers/md/dm-snap.c:900: undefined reference to `__cmpdi2'
> 　　drivers/md/dm-snap.c:900: relocation truncated to fit: R_MIPS_26
against `__cmpdi2'
> 　　make: *** [.tmp_vmlinux1] Error 1
> 　　make: *** No rule to make target `../vmlinux', needed by `piggy.lzma'.
Stop.
> 　　copyed to ../wrt_uImage
> 　　cp: cannot stat `uImageLzma': No such file or directory
> 　　ls: cannot access ../wrt_uImage: No such file or directory
> 　　===============================================================
> 　　    output files:                           
> 　　         wrt_uImage : the kernel image      
> 　　
> 　　
> 　　Thanks &Best Wishes,
> 　　Jack_Lu(鲁红刚)
>    益满颖贸易（上海）有限公司
>    上海市愚园路168号环球大厦A座2101室
>    电话：+86 21 62495328/29/30/31 分机：820
>    传真：+86 21 62490538
>    MSN: luhongang@163.com
> 
> 　　
> 
> 



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

答复: hello! can you help me for compiling the linux kernel?

[jack_lu]

Dear Wu,
     I tried to add #include <asm-mips/ipmux.h> or extern __init
opipmux_gel_init,but can not resolve these errors.
Thanks,
Jack Lu

-----邮件原件-----
发件人: Wu Zhangjin [mailto:wuzhangjin@gmail.com] 
发送时间: 2009年12月1日 13:14
收件人: jack_lu
抄送: linux-mips@linux-mips.org
主题: Re: hello! can you help me for compiling the linux kernel?

On Tue, 2009-12-01 at 11:52 +0800, jack_lu wrote:
> Dear Sir,
> 　　hello! can you help me for compiling the linux kernel?
> 　　Linux version is linux-2.6.21.5.
> 　　CPU:mips
> 　　Cross-compilation tools is eldk and openwrt file packages.

Hello,

Which board are you using? and did you try the corresponding defconfig
file under arch/mips/configs/.

Regards,
	Wu zhangjin

> 　　Errors are the followings.
> 　　init/built-in.o: In function `init':
> 　　init/main.c:833: undefined reference to `opipmux_gel_init'
> 　　init/main.c:833: relocation truncated to fit: R_MIPS_26 against
`opipmux_gel_init'
> 　　init/main.c:835: undefined reference to `ip_auto_config'
> 　　init/main.c:835: relocation truncated to fit: R_MIPS_26 against
`ip_auto_config'
> 　　init/built-in.o: In function `start_kernel':
> 　　init/main.c:525: undefined reference to `setup_prom_printf'
> 　　init/main.c:525: relocation truncated to fit: R_MIPS_26 against
`setup_prom_printf'
> 　　init/main.c:527: undefined reference to `prom_printf'
> 　　init/main.c:527: relocation truncated to fit: R_MIPS_26 against
`prom_printf'
> 　　init/main.c:530: undefined reference to `prom_printf'
> 　　init/main.c:530: relocation truncated to fit: R_MIPS_26 against
`prom_printf'
> 　　arch/mips/kernel/built-in.o: In function `test_setdata':
> 　　arch/mips/kernel/syscall.c:461: undefined reference to
`set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/syscall.c:461: relocation truncated to fit: R_MIPS_26
against `set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_getdata':
> 　　arch/mips/kernel/syscall.c:453: undefined reference to
`get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/syscall.c:453: relocation truncated to fit: R_MIPS_26
against `get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_waitinterrupt':
> 　　arch/mips/kernel/syscall.c:446: undefined reference to
`wait_for_host_test_interrupt'
> 　　arch/mips/kernel/syscall.c:446: relocation truncated to fit: R_MIPS_26
against `wait_for_host_test_interrupt'
> 　　kernel/built-in.o: In function `free_module':
> 　　kernel/module.c:1231: undefined reference to `kfree1'
> 　　kernel/module.c:1231: relocation truncated to fit: R_MIPS_26 against
`kfree1'
> 　　drivers/built-in.o: In function `snapshot_map':
> 　　drivers/md/dm-snap.c:900: undefined reference to `__cmpdi2'
> 　　drivers/md/dm-snap.c:900: relocation truncated to fit: R_MIPS_26
against `__cmpdi2'
> 　　make: *** [.tmp_vmlinux1] Error 1
> 　　make: *** No rule to make target `../vmlinux', needed by `piggy.lzma'.
Stop.
> 　　copyed to ../wrt_uImage
> 　　cp: cannot stat `uImageLzma': No such file or directory
> 　　ls: cannot access ../wrt_uImage: No such file or directory
> 　　===============================================================
> 　　    output files:                           
> 　　         wrt_uImage : the kernel image      
> 　　
> 　　
> 　　Thanks &Best Wishes,
> 　　Jack_Lu(鲁红刚)
>    益满颖贸易（上海）有限公司
>    上海市愚园路168号环球大厦A座2101室
>    电话：+86 21 62495328/29/30/31 分机：820
>    传真：+86 21 62490538
>    MSN: luhongang@163.com
> 
> 　　
> 
> 



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

答复: hello! can you help me for compiling the linux kernel?

[jack_lu]

Dear Wu,
     I tried to add #include <asm-mips/ipmux.h> or extern __init
opipmux_gel_init,but can not resolve these errors.
Thanks,
Jack Lu

-----邮件原件-----
发件人: Wu Zhangjin [mailto:wuzhangjin@gmail.com] 
发送时间: 2009年12月1日 13:14
收件人: jack_lu
抄送: linux-mips@linux-mips.org
主题: Re: hello! can you help me for compiling the linux kernel?

On Tue, 2009-12-01 at 11:52 +0800, jack_lu wrote:
> Dear Sir,
> 　　hello! can you help me for compiling the linux kernel?
> 　　Linux version is linux-2.6.21.5.
> 　　CPU:mips
> 　　Cross-compilation tools is eldk and openwrt file packages.

Hello,

Which board are you using? and did you try the corresponding defconfig
file under arch/mips/configs/.

Regards,
	Wu zhangjin

> 　　Errors are the followings.
> 　　init/built-in.o: In function `init':
> 　　init/main.c:833: undefined reference to `opipmux_gel_init'
> 　　init/main.c:833: relocation truncated to fit: R_MIPS_26 against
`opipmux_gel_init'
> 　　init/main.c:835: undefined reference to `ip_auto_config'
> 　　init/main.c:835: relocation truncated to fit: R_MIPS_26 against
`ip_auto_config'
> 　　init/built-in.o: In function `start_kernel':
> 　　init/main.c:525: undefined reference to `setup_prom_printf'
> 　　init/main.c:525: relocation truncated to fit: R_MIPS_26 against
`setup_prom_printf'
> 　　init/main.c:527: undefined reference to `prom_printf'
> 　　init/main.c:527: relocation truncated to fit: R_MIPS_26 against
`prom_printf'
> 　　init/main.c:530: undefined reference to `prom_printf'
> 　　init/main.c:530: relocation truncated to fit: R_MIPS_26 against
`prom_printf'
> 　　arch/mips/kernel/built-in.o: In function `test_setdata':
> 　　arch/mips/kernel/syscall.c:461: undefined reference to
`set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/syscall.c:461: relocation truncated to fit: R_MIPS_26
against `set_ipmux_el_tx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_getdata':
> 　　arch/mips/kernel/syscall.c:453: undefined reference to
`get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/syscall.c:453: relocation truncated to fit: R_MIPS_26
against `get_ipmux_el_rx_buf_data'
> 　　arch/mips/kernel/built-in.o: In function `test_waitinterrupt':
> 　　arch/mips/kernel/syscall.c:446: undefined reference to
`wait_for_host_test_interrupt'
> 　　arch/mips/kernel/syscall.c:446: relocation truncated to fit: R_MIPS_26
against `wait_for_host_test_interrupt'
> 　　kernel/built-in.o: In function `free_module':
> 　　kernel/module.c:1231: undefined reference to `kfree1'
> 　　kernel/module.c:1231: relocation truncated to fit: R_MIPS_26 against
`kfree1'
> 　　drivers/built-in.o: In function `snapshot_map':
> 　　drivers/md/dm-snap.c:900: undefined reference to `__cmpdi2'
> 　　drivers/md/dm-snap.c:900: relocation truncated to fit: R_MIPS_26
against `__cmpdi2'
> 　　make: *** [.tmp_vmlinux1] Error 1
> 　　make: *** No rule to make target `../vmlinux', needed by `piggy.lzma'.
Stop.
> 　　copyed to ../wrt_uImage
> 　　cp: cannot stat `uImageLzma': No such file or directory
> 　　ls: cannot access ../wrt_uImage: No such file or directory
> 　　===============================================================
> 　　    output files:                           
> 　　         wrt_uImage : the kernel image      
> 　　
> 　　
> 　　Thanks &Best Wishes,
> 　　Jack_Lu(鲁红刚)
>    益满颖贸易（上海）有限公司
>    上海市愚园路168号环球大厦A座2101室
>    电话：+86 21 62495328/29/30/31 分机：820
>    传真：+86 21 62490538
>    MSN: luhongang@163.com
> 
> 　　
> 
> 



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.