From: girish <girishvg@gmail.com>
To: "linux-mips@linux-mips.org" <linux-mips@linux-mips.org>
Cc: girish <girishvg@gmail.com>, Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Subject: Re: [PATCH] cleanup hardcoding __pa/__va macros etc. (take-2)
Date: Mon, 25 Sep 2006 23:51:46 +0900 [thread overview]
Message-ID: <C13E1C13.6FDC%girishvg@gmail.com> (raw)
In-Reply-To: <20060925.002616.126574366.anemo@mba.ocn.ne.jp>
[-- Attachment #1: Type: text/plain, Size: 1403 bytes --]
Here is the patch again, attached as a text file. I don't have idea how
these macros should be on a 64bit machine, so I just left them as it is.
Could you please verify these macros again?
On 9/25/06 12:26 AM, "Atsushi Nemoto" <anemo@mba.ocn.ne.jp> wrote:
> On Sun, 24 Sep 2006 14:39:38 +0900, girish <girishvg@gmail.com> wrote:
>> --- linux-vanilla/include/asm-mips/page.h 2006-09-24 12:23:34.000000000 +0900
>> +++ linux/include/asm-mips/page.h 2006-09-24 14:00:53.000000000 +0900
>> @@ -134,8 +134,13 @@ typedef struct { unsigned long pgprot; }
>> /* to align the pointer to the (next) page boundary */
>> #define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK)
>>
>> -#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
>> -#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
>> +#define UNMAPLIMIT (UNCAC_BASE - CAC_BASE) /*HIGHMEM_START*/
>> +#define ISMAPPED(x) (KSEGX((x)) > UNMAPLIMIT)
>> +#define ___pa(x) ((unsigned long) (x) - PAGE_OFFSET)
>> +#define __pa(x) (ISMAPPED(x) ? (x) : ___pa(x))
>> +
>> +#define ___va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
>> +#define __va(x) (ISMAPPED(x) ? (x) : ___va(x))
>>
>> #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
>
> This part looks broken for 64-bit kernel.
>
> For other parts, it would be better to keep correct indentation level.
>
> ---
> Atsushi Nemoto
[-- Attachment #2: patch-basicfix-20060925 --]
[-- Type: application/octet-stream, Size: 4643 bytes --]
diff -uprN -X linux-vanilla/Documentation/dontdiff linux-vanilla/arch/mips/mm/dma-noncoherent.c linux/arch/mips/mm/dma-noncoherent.c
--- linux-vanilla/arch/mips/mm/dma-noncoherent.c 2006-09-24 12:22:46.000000000 +0900
+++ linux/arch/mips/mm/dma-noncoherent.c 2006-09-25 22:38:38.000000000 +0900
@@ -334,7 +334,7 @@ EXPORT_SYMBOL(pci_dac_page_to_dma);
struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
dma64_addr_t dma_addr)
{
- return mem_map + (dma_addr >> PAGE_SHIFT);
+ return pfn_to_page (dma_addr >> PAGE_SHIFT);
}
EXPORT_SYMBOL(pci_dac_dma_to_page);
diff -uprN -X linux-vanilla/Documentation/dontdiff linux-vanilla/arch/mips/mm/init.c linux/arch/mips/mm/init.c
--- linux-vanilla/arch/mips/mm/init.c 2006-09-24 12:22:46.000000000 +0900
+++ linux/arch/mips/mm/init.c 2006-09-25 22:43:22.000000000 +0900
@@ -155,24 +155,22 @@ void __init paging_init(void)
low = max_low_pfn;
high = highend_pfn;
-#ifdef CONFIG_ISA
- if (low < max_dma)
+ if (low < max_dma) {
zones_size[ZONE_DMA] = low;
- else {
+ } else {
zones_size[ZONE_DMA] = max_dma;
zones_size[ZONE_NORMAL] = low - max_dma;
}
-#else
- zones_size[ZONE_DMA] = low;
-#endif
+
#ifdef CONFIG_HIGHMEM
if (cpu_has_dc_aliases) {
printk(KERN_WARNING "This processor doesn't support highmem.");
if (high - low)
printk(" %ldk highmem ignored", high - low);
printk("\n");
- } else
- zones_size[ZONE_HIGHMEM] = high - low;
+ } else {
+ zones_size[ZONE_HIGHMEM] = high - highstart_pfn;
+ }
#endif
free_area_init(zones_size);
@@ -233,7 +231,7 @@ void __init mem_init(void)
#ifdef CONFIG_HIGHMEM
for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) {
- struct page *page = mem_map + tmp;
+ struct page *page = pfn_to_page(tmp);
if (!page_is_ram(tmp)) {
SetPageReserved(page);
diff -uprN -X linux-vanilla/Documentation/dontdiff linux-vanilla/include/asm-mips/dma.h linux/include/asm-mips/dma.h
--- linux-vanilla/include/asm-mips/dma.h 2006-09-24 12:23:34.000000000 +0900
+++ linux/include/asm-mips/dma.h 2006-09-25 22:45:28.000000000 +0900
@@ -87,8 +87,13 @@
/* Horrible hack to have a correct DMA window on IP22 */
#include <asm/sgi/mc.h>
#define MAX_DMA_ADDRESS (PAGE_OFFSET + SGIMC_SEG0_BADDR + 0x01000000)
-#else
+#elif defined(CONFIG_ISA)
#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000)
+#else
+#ifndef PLAT_MAX_DMA_SIZE
+#define PLAT_MAX_DMA_SIZE 0x10000000 /* 256MB: true for most of the MIPS32 systems */
+#endif
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + PLAT_MAX_DMA_SIZE)
#endif
/* 8237 DMA controllers */
diff -uprN -X linux-vanilla/Documentation/dontdiff linux-vanilla/include/asm-mips/io.h linux/include/asm-mips/io.h
--- linux-vanilla/include/asm-mips/io.h 2006-09-24 12:23:34.000000000 +0900
+++ linux/include/asm-mips/io.h 2006-09-25 22:51:31.000000000 +0900
@@ -116,7 +116,7 @@ static inline void set_io_port_base(unsi
*/
static inline unsigned long virt_to_phys(volatile void * address)
{
- return (unsigned long)address - PAGE_OFFSET;
+ return (unsigned long) __pa(address);
}
/*
@@ -133,7 +133,7 @@ static inline unsigned long virt_to_phys
*/
static inline void * phys_to_virt(unsigned long address)
{
- return (void *)(address + PAGE_OFFSET);
+ return (void *) __va(address);
}
/*
@@ -141,12 +141,12 @@ static inline void * phys_to_virt(unsign
*/
static inline unsigned long isa_virt_to_bus(volatile void * address)
{
- return (unsigned long)address - PAGE_OFFSET;
+ return (unsigned long) __pa(address);
}
static inline void * isa_bus_to_virt(unsigned long address)
{
- return (void *)(address + PAGE_OFFSET);
+ return (void *) __va(address);
}
#define isa_page_to_bus page_to_phys
diff -uprN -X linux-vanilla/Documentation/dontdiff linux-vanilla/include/asm-mips/page.h linux/include/asm-mips/page.h
--- linux-vanilla/include/asm-mips/page.h 2006-09-24 12:23:34.000000000 +0900
+++ linux/include/asm-mips/page.h 2006-09-25 22:50:40.000000000 +0900
@@ -134,8 +134,17 @@ typedef struct { unsigned long pgprot; }
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
-#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
+#ifdef CONFIG_32BIT
+#define ISMAPPED(x) (KSEGX((x)) >= HIGHMEM_START && KSEGX((x)) < KSEG0)
+#else
+#define ISMAPPED(x) (0)
+#endif
+
+#define ___pa(x) ((unsigned long) (x) - PAGE_OFFSET)
+#define __pa(x) (ISMAPPED(x) ? (x) : ___pa(x))
+
+#define ___va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
+#define __va(x) (ISMAPPED(x) ? (x) : ___va(x))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
next prev parent reply other threads:[~2006-09-25 14:52 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-24 5:39 [PATCH] cleanup hardcoding __pa/__va macros etc girish
2006-09-24 7:15 ` [PATCH] cleanup hardcoding __pa/__va macros etc. (FWD) girish
2006-09-24 15:26 ` [PATCH] cleanup hardcoding __pa/__va macros etc Atsushi Nemoto
2006-09-25 14:51 ` girish [this message]
2006-09-25 15:43 ` [PATCH] cleanup hardcoding __pa/__va macros etc. (take-2) Atsushi Nemoto
[not found] ` <C13EBDF2.724C%girishvg@gmail.com>
2006-09-26 2:24 ` FW: " girish
2006-09-26 9:02 ` Atsushi Nemoto
2006-09-26 15:20 ` girish
2006-09-26 16:35 ` Atsushi Nemoto
2006-09-26 22:06 ` girish
2006-09-27 15:35 ` Atsushi Nemoto
2006-09-27 16:58 ` PATCH] cleanup hardcoding __pa/__va macros etc. (take-4) girish
2006-09-28 23:29 ` Ralf Baechle
2006-09-29 14:45 ` PATCH] cleanup hardcoding __pa/__va macros etc. (take-5) girish
2006-09-29 17:59 ` Atsushi Nemoto
2006-09-29 18:33 ` girish
2006-10-01 14:52 ` Atsushi Nemoto
2006-10-01 14:57 ` girish
2006-10-01 15:09 ` Atsushi Nemoto
2006-09-28 15:01 ` [PATCH] cleanup hardcoding __pa/__va macros etc. (take-2) Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=C13E1C13.6FDC%girishvg@gmail.com \
--to=girishvg@gmail.com \
--cc=anemo@mba.ocn.ne.jp \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox