* fs problem between 2.4.19-rc1 and tip? @ 2002-09-16 21:15 Matthew Dharm 2002-09-18 16:30 ` Matthew Dharm 2002-09-18 16:57 ` Brian Murphy 0 siblings, 2 replies; 4+ messages in thread From: Matthew Dharm @ 2002-09-16 21:15 UTC (permalink / raw) To: Linux-MIPS Is anyone else seeing a problem using SCSI disks (ext2 format) that was introduced between 2.4.19-rc1 and the tip revision? Upon booting the 2.4.20-pre6 (tip of CVS), the root filesystem throws an error about an "unaligned directory entry" and then cannot find init. 2.4.19-rc1 with the _same_ hardware configuration works just fine. Is it just me, or this this something general? Matt -- Matthew D. Dharm Senior Software Designer Momentum Computer Inc. 1815 Aston Ave. Suite 107 (760) 431-8663 X-115 Carlsbad, CA 92008-7310 Momentum Works For You www.momenco.com ^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: fs problem between 2.4.19-rc1 and tip? 2002-09-16 21:15 fs problem between 2.4.19-rc1 and tip? Matthew Dharm @ 2002-09-18 16:30 ` Matthew Dharm 2002-09-18 16:57 ` Brian Murphy 1 sibling, 0 replies; 4+ messages in thread From: Matthew Dharm @ 2002-09-18 16:30 UTC (permalink / raw) To: Linux-MIPS Okay... if nobody is going to report seeing a problem like this, can someone confirm that using the CVS tip their SCSI disk works? Matt -- Matthew D. Dharm Senior Software Designer Momentum Computer Inc. 1815 Aston Ave. Suite 107 (760) 431-8663 X-115 Carlsbad, CA 92008-7310 Momentum Works For You www.momenco.com > -----Original Message----- > From: linux-mips-bounce@linux-mips.org > [mailto:linux-mips-bounce@linux-mips.org]On Behalf Of Matthew Dharm > Sent: Monday, September 16, 2002 2:15 PM > To: Linux-MIPS > Subject: fs problem between 2.4.19-rc1 and tip? > > > Is anyone else seeing a problem using SCSI disks (ext2 format) that > was introduced between 2.4.19-rc1 and the tip revision? > > Upon booting the 2.4.20-pre6 (tip of CVS), the root > filesystem throws > an error about an "unaligned directory entry" and then cannot find > init. > > 2.4.19-rc1 with the _same_ hardware configuration works just fine. > > Is it just me, or this this something general? > > Matt > > -- > Matthew D. Dharm Senior Software Designer > Momentum Computer Inc. 1815 Aston Ave. > Suite 107 > (760) 431-8663 X-115 Carlsbad, CA 92008-7310 > Momentum Works For You www.momenco.com > > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: fs problem between 2.4.19-rc1 and tip? 2002-09-16 21:15 fs problem between 2.4.19-rc1 and tip? Matthew Dharm 2002-09-18 16:30 ` Matthew Dharm @ 2002-09-18 16:57 ` Brian Murphy 2002-09-18 20:52 ` Matthew Dharm 1 sibling, 1 reply; 4+ messages in thread From: Brian Murphy @ 2002-09-18 16:57 UTC (permalink / raw) To: Linux-MIPS; +Cc: Matthew Dharm Matthew Dharm wrote: >Is anyone else seeing a problem using SCSI disks (ext2 format) that >was introduced between 2.4.19-rc1 and the tip revision? > >Upon booting the 2.4.20-pre6 (tip of CVS), the root filesystem throws >an error about an "unaligned directory entry" and then cannot find >init. > > This sounds like a problem I had with cache flushing in pci.h which got triggered by a change in the ide dma driver. Is it a pci driver? If so you could try the fix I submitted a few days ago with ide-dma in the subject line. /Brian ^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: fs problem between 2.4.19-rc1 and tip? 2002-09-18 16:57 ` Brian Murphy @ 2002-09-18 20:52 ` Matthew Dharm 0 siblings, 0 replies; 4+ messages in thread From: Matthew Dharm @ 2002-09-18 20:52 UTC (permalink / raw) To: Brian Murphy, Linux-MIPS Well, that makes things significantly better.... I can mount my filesystem now, tho I still get errors like: EXT2-fs error (device sd(8,2)): ext2_check_page: bad entry in directory #894638: unaligned directory entry - offset=4068, inode=544829025, rec_len=28261, name_len=116 But, it does boot. My serial console stopped (standard NS16550) working, tho.... as did a custom NVRAM driver. Oddly enough, it's only /dev/console that stopped working (actually, it no longer appears on my filesystem?!?) -- the getty running on /dev/ttyS0 works just fine. Regardless, the DMA patch should definately go in. I'm still looking into the other problems... we'll see what I come up with. Matt -- Matthew D. Dharm Senior Software Designer Momentum Computer Inc. 1815 Aston Ave. Suite 107 (760) 431-8663 X-115 Carlsbad, CA 92008-7310 Momentum Works For You www.momenco.com > -----Original Message----- > From: linux-mips-bounce@linux-mips.org > [mailto:linux-mips-bounce@linux-mips.org]On Behalf Of Brian Murphy > Sent: Wednesday, September 18, 2002 9:57 AM > To: Linux-MIPS > Cc: Matthew Dharm > Subject: Re: fs problem between 2.4.19-rc1 and tip? > > > Matthew Dharm wrote: > > >Is anyone else seeing a problem using SCSI disks (ext2 format) that > >was introduced between 2.4.19-rc1 and the tip revision? > > > >Upon booting the 2.4.20-pre6 (tip of CVS), the root > filesystem throws > >an error about an "unaligned directory entry" and then cannot find > >init. > > > > > This sounds like a problem I had with cache flushing in > pci.h which got > triggered > by a change in the ide dma driver. Is it a pci driver? If > so you could > try the fix > I submitted a few days ago with ide-dma in the subject line. > > /Brian > > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2002-09-18 20:52 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2002-09-16 21:15 fs problem between 2.4.19-rc1 and tip? Matthew Dharm 2002-09-18 16:30 ` Matthew Dharm 2002-09-18 16:57 ` Brian Murphy 2002-09-18 20:52 ` Matthew Dharm
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox