[PATCH] MIPS: configs: Enable the current Ingenic USB PHY symbol

[PATCH] MIPS: configs: Enable the current Ingenic USB PHY symbol

[Pengpeng Hou]

The Ingenic USB PHY provider is now built from phy-ingenic-usb.o under
`CONFIG_PHY_INGENIC_USB`.

The Ingenic defconfigs below still enable the stale `CONFIG_JZ4770_PHY`
symbol.  That symbol no longer carries the provider object, so the
defconfigs lose the intended USB PHY provider after olddefconfig.

Use `CONFIG_PHY_INGENIC_USB` instead.

Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
---
 arch/mips/configs/cu1000-neo_defconfig | 2 +-
 arch/mips/configs/cu1830-neo_defconfig | 2 +-
 arch/mips/configs/gcw0_defconfig       | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
--- a/arch/mips/configs/cu1000-neo_defconfig
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -86,7 +86,7 @@ CONFIG_RTC_DRV_JZ4740=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_JZ4780=y
 # CONFIG_INGENIC_TIMER is not set
 CONFIG_INGENIC_SYSOST=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_JZ4770_PHY=y
+CONFIG_PHY_INGENIC_USB=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_AUTOFS_FS=y
diff --git a/arch/mips/configs/cu1830-neo_defconfig b/arch/mips/configs/cu1830-neo_defconfig
--- a/arch/mips/configs/cu1830-neo_defconfig
+++ b/arch/mips/configs/cu1830-neo_defconfig
@@ -89,7 +89,7 @@ CONFIG_RTC_DRV_JZ4740=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_JZ4780=y
 # CONFIG_INGENIC_TIMER is not set
 CONFIG_INGENIC_SYSOST=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_JZ4770_PHY=y
+CONFIG_PHY_INGENIC_USB=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_AUTOFS_FS=y
diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig
--- a/arch/mips/configs/gcw0_defconfig
+++ b/arch/mips/configs/gcw0_defconfig
@@ -99,7 +99,7 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_JZ4740=y
 CONFIG_USB_INVENTRA_DMA=y
-CONFIG_JZ4770_PHY=y
+CONFIG_PHY_INGENIC_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
 CONFIG_USB_ETH=y

Re: [PATCH] MIPS: configs: Enable the current Ingenic USB PHY symbol

[Thomas Bogendoerfer]

On Wed, Jun 24, 2026 at 04:17:39PM +0800, Pengpeng Hou wrote:
> The Ingenic USB PHY provider is now built from phy-ingenic-usb.o under
> `CONFIG_PHY_INGENIC_USB`.
> 
> The Ingenic defconfigs below still enable the stale `CONFIG_JZ4770_PHY`
> symbol.  That symbol no longer carries the provider object, so the
> defconfigs lose the intended USB PHY provider after olddefconfig.
> 
> Use `CONFIG_PHY_INGENIC_USB` instead.
> 
> Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
> ---
>  arch/mips/configs/cu1000-neo_defconfig | 2 +-
>  arch/mips/configs/cu1830-neo_defconfig | 2 +-
>  arch/mips/configs/gcw0_defconfig       | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)

applied to mips-fixes

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]