Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Kevin Cernekee <cernekee@gmail.com>
To: ralf@linux-mips.org
Cc: <ffainelli@freebox.fr>, <mbizon@freebox.fr>,
	<jonas.gorski@gmail.com>, <linux-mips@linux-mips.org>
Subject: [PATCH 7/7] MIPS: BCM63XX: Create platform_device for USBD
Date: Fri, 22 Jun 2012 22:14:57 -0700	[thread overview]
Message-ID: <e2aacdca2b2e2f5b7ee20563032bf1ee@localhost> (raw)
In-Reply-To: <0f67eabbb0d5c59add27e42a08b94944@localhost>

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
 arch/mips/bcm63xx/Makefile                         |  2 +-
 arch/mips/bcm63xx/boards/board_bcm963xx.c          | 10 +++
 arch/mips/bcm63xx/dev-usb-usbd.c                   | 72 ++++++++++++++++++++++
 .../asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h        | 17 +++++
 .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  5 ++
 5 files changed, 105 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/bcm63xx/dev-usb-usbd.c
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h

diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index 833af72..9bbb30a 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,6 +1,6 @@
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
 		   dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-rng.o \
-		   dev-spi.o dev-uart.o dev-wdt.o
+		   dev-spi.o dev-uart.o dev-wdt.o dev-usb-usbd.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index feb0525..ea4ea77 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -24,6 +24,7 @@
 #include <bcm63xx_dev_flash.h>
 #include <bcm63xx_dev_pcmcia.h>
 #include <bcm63xx_dev_spi.h>
+#include <bcm63xx_dev_usb_usbd.h>
 #include <board_bcm963xx.h>
 
 #define PFX	"board_bcm963xx: "
@@ -42,6 +43,12 @@ static struct board_info __initdata board_96328avng = {
 
 	.has_uart0			= 1,
 	.has_pci			= 1,
+	.has_usbd			= 0,
+
+	.usbd = {
+		.use_fullspeed		= 0,
+		.port_no		= 0,
+	},
 
 	.leds = {
 		{
@@ -888,6 +895,9 @@ int __init board_register_devices(void)
 	    !board_get_mac_address(board.enet1.mac_addr))
 		bcm63xx_enet_register(1, &board.enet1);
 
+	if (board.has_usbd)
+		bcm63xx_usbd_register(&board.usbd);
+
 	if (board.has_dsp)
 		bcm63xx_dsp_register(&board.dsp);
 
diff --git a/arch/mips/bcm63xx/dev-usb-usbd.c b/arch/mips/bcm63xx/dev-usb-usbd.c
new file mode 100644
index 0000000..5aeae2b
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+ * Copyright (C) 2012 Broadcom Corporation
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_usb_usbd.h>
+
+static struct resource usbd_resources[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 usbd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device bcm63xx_usbd_device = {
+	.name		= "bcm63xx_udc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(usbd_resources),
+	.resource	= usbd_resources,
+	.dev		= {
+		.dma_mask		= &usbd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+int __init bcm63xx_usbd_register(const struct bcm63xx_usbd_platform_data *pd)
+{
+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
+		return 0;
+
+	usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
+	usbd_resources[0].end = usbd_resources[0].start + RSET_USBD_SIZE - 1;
+
+	usbd_resources[1].start = bcm63xx_regset_address(RSET_USBDMA);
+	usbd_resources[1].end = usbd_resources[1].start + RSET_USBDMA_SIZE - 1;
+
+	usbd_resources[2].start = bcm63xx_get_irq_number(IRQ_USBD);
+
+	usbd_resources[3].start = bcm63xx_get_irq_number(IRQ_USBDMA_RXDMA0);
+	usbd_resources[3].end = bcm63xx_get_irq_number(IRQ_USBDMA_TXDMA5);
+
+	platform_device_add_data(&bcm63xx_usbd_device, pd, sizeof(*pd));
+
+	return platform_device_register(&bcm63xx_usbd_device);
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h
new file mode 100644
index 0000000..5d6d698
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h
@@ -0,0 +1,17 @@
+#ifndef BCM63XX_DEV_USB_USBD_H_
+#define BCM63XX_DEV_USB_USBD_H_
+
+/*
+ * usb device platform data
+ */
+struct bcm63xx_usbd_platform_data {
+	/* board can only support full speed (USB 1.1) */
+	int use_fullspeed;
+
+	/* 0-based port index, for chips with >1 USB PHY */
+	int port_no;
+};
+
+int bcm63xx_usbd_register(const struct bcm63xx_usbd_platform_data *pd);
+
+#endif /* BCM63XX_DEV_USB_USBD_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
index 474daaa..b0dd4bb 100644
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -5,6 +5,7 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_usb_usbd.h>
 #include <bcm63xx_dev_dsp.h>
 
 /*
@@ -44,6 +45,7 @@ struct board_info {
 	unsigned int	has_pccard:1;
 	unsigned int	has_ohci0:1;
 	unsigned int	has_ehci0:1;
+	unsigned int	has_usbd:1;
 	unsigned int	has_dsp:1;
 	unsigned int	has_uart0:1;
 	unsigned int	has_uart1:1;
@@ -52,6 +54,9 @@ struct board_info {
 	struct bcm63xx_enet_platform_data enet0;
 	struct bcm63xx_enet_platform_data enet1;
 
+	/* USB config */
+	struct bcm63xx_usbd_platform_data usbd;
+
 	/* DSP config */
 	struct bcm63xx_dsp_platform_data dsp;
 
-- 
1.7.11.1

WARNING: multiple messages have this Message-ID (diff)
From: Kevin Cernekee <cernekee@gmail.com>
To: ralf@linux-mips.org
Cc: ffainelli@freebox.fr, mbizon@freebox.fr, jonas.gorski@gmail.com,
	linux-mips@linux-mips.org
Subject: [PATCH 7/7] MIPS: BCM63XX: Create platform_device for USBD
Date: Fri, 22 Jun 2012 22:14:57 -0700	[thread overview]
Message-ID: <e2aacdca2b2e2f5b7ee20563032bf1ee@localhost> (raw)
Message-ID: <20120623051457.aZgd0FSavuIOTmCWgi_sWHAYOkgoC0ZoSLnwz9tEo_Q@z> (raw)
In-Reply-To: <0f67eabbb0d5c59add27e42a08b94944@localhost>

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
---
 arch/mips/bcm63xx/Makefile                         |  2 +-
 arch/mips/bcm63xx/boards/board_bcm963xx.c          | 10 +++
 arch/mips/bcm63xx/dev-usb-usbd.c                   | 72 ++++++++++++++++++++++
 .../asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h        | 17 +++++
 .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  5 ++
 5 files changed, 105 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/bcm63xx/dev-usb-usbd.c
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h

diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index 833af72..9bbb30a 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,6 +1,6 @@
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
 		   dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-rng.o \
-		   dev-spi.o dev-uart.o dev-wdt.o
+		   dev-spi.o dev-uart.o dev-wdt.o dev-usb-usbd.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index feb0525..ea4ea77 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -24,6 +24,7 @@
 #include <bcm63xx_dev_flash.h>
 #include <bcm63xx_dev_pcmcia.h>
 #include <bcm63xx_dev_spi.h>
+#include <bcm63xx_dev_usb_usbd.h>
 #include <board_bcm963xx.h>
 
 #define PFX	"board_bcm963xx: "
@@ -42,6 +43,12 @@ static struct board_info __initdata board_96328avng = {
 
 	.has_uart0			= 1,
 	.has_pci			= 1,
+	.has_usbd			= 0,
+
+	.usbd = {
+		.use_fullspeed		= 0,
+		.port_no		= 0,
+	},
 
 	.leds = {
 		{
@@ -888,6 +895,9 @@ int __init board_register_devices(void)
 	    !board_get_mac_address(board.enet1.mac_addr))
 		bcm63xx_enet_register(1, &board.enet1);
 
+	if (board.has_usbd)
+		bcm63xx_usbd_register(&board.usbd);
+
 	if (board.has_dsp)
 		bcm63xx_dsp_register(&board.dsp);
 
diff --git a/arch/mips/bcm63xx/dev-usb-usbd.c b/arch/mips/bcm63xx/dev-usb-usbd.c
new file mode 100644
index 0000000..5aeae2b
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+ * Copyright (C) 2012 Broadcom Corporation
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_usb_usbd.h>
+
+static struct resource usbd_resources[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 usbd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device bcm63xx_usbd_device = {
+	.name		= "bcm63xx_udc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(usbd_resources),
+	.resource	= usbd_resources,
+	.dev		= {
+		.dma_mask		= &usbd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+int __init bcm63xx_usbd_register(const struct bcm63xx_usbd_platform_data *pd)
+{
+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
+		return 0;
+
+	usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
+	usbd_resources[0].end = usbd_resources[0].start + RSET_USBD_SIZE - 1;
+
+	usbd_resources[1].start = bcm63xx_regset_address(RSET_USBDMA);
+	usbd_resources[1].end = usbd_resources[1].start + RSET_USBDMA_SIZE - 1;
+
+	usbd_resources[2].start = bcm63xx_get_irq_number(IRQ_USBD);
+
+	usbd_resources[3].start = bcm63xx_get_irq_number(IRQ_USBDMA_RXDMA0);
+	usbd_resources[3].end = bcm63xx_get_irq_number(IRQ_USBDMA_TXDMA5);
+
+	platform_device_add_data(&bcm63xx_usbd_device, pd, sizeof(*pd));
+
+	return platform_device_register(&bcm63xx_usbd_device);
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h
new file mode 100644
index 0000000..5d6d698
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_usbd.h
@@ -0,0 +1,17 @@
+#ifndef BCM63XX_DEV_USB_USBD_H_
+#define BCM63XX_DEV_USB_USBD_H_
+
+/*
+ * usb device platform data
+ */
+struct bcm63xx_usbd_platform_data {
+	/* board can only support full speed (USB 1.1) */
+	int use_fullspeed;
+
+	/* 0-based port index, for chips with >1 USB PHY */
+	int port_no;
+};
+
+int bcm63xx_usbd_register(const struct bcm63xx_usbd_platform_data *pd);
+
+#endif /* BCM63XX_DEV_USB_USBD_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
index 474daaa..b0dd4bb 100644
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -5,6 +5,7 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_usb_usbd.h>
 #include <bcm63xx_dev_dsp.h>
 
 /*
@@ -44,6 +45,7 @@ struct board_info {
 	unsigned int	has_pccard:1;
 	unsigned int	has_ohci0:1;
 	unsigned int	has_ehci0:1;
+	unsigned int	has_usbd:1;
 	unsigned int	has_dsp:1;
 	unsigned int	has_uart0:1;
 	unsigned int	has_uart1:1;
@@ -52,6 +54,9 @@ struct board_info {
 	struct bcm63xx_enet_platform_data enet0;
 	struct bcm63xx_enet_platform_data enet1;
 
+	/* USB config */
+	struct bcm63xx_usbd_platform_data usbd;
+
 	/* DSP config */
 	struct bcm63xx_dsp_platform_data dsp;
 
-- 
1.7.11.1

  parent reply	other threads:[~2012-06-23  5:26 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-23  5:14 [PATCH 0/7] Prerequisites for BCM63XX UDC driver Kevin Cernekee
2012-06-23  5:14 ` Kevin Cernekee
2012-06-23  5:14 ` [PATCH 1/7] MIPS: BCM63XX: Expose the USBH/USBD clocks on BCM6328/BCM6368 Kevin Cernekee
2012-06-23  5:14   ` Kevin Cernekee
2012-06-23  5:14 ` [PATCH 2/7] MIPS: BCM63XX: Move DMA descriptor definition into common header file Kevin Cernekee
2012-06-23  5:14   ` Kevin Cernekee
2012-06-26 15:13   ` Jonas Gorski
2012-06-23  5:14 ` [PATCH 3/7] MIPS: BCM63XX: Add new IUDMA definitions needed for USBD Kevin Cernekee
2012-06-23  5:14   ` Kevin Cernekee
2012-06-23  5:14 ` [PATCH 4/7] MIPS: BCM63XX: Add register definitions for USBD dependencies Kevin Cernekee
2012-06-23  5:14   ` Kevin Cernekee
2012-06-23  5:14 ` [PATCH 5/7] MIPS: BCM63XX: Fix USB IRQ definitions for 6328 Kevin Cernekee
2012-06-23  5:14   ` Kevin Cernekee
2012-06-23  5:14 ` [PATCH 6/7] MIPS: BCM63XX: Add register and IRQ definitions for USB 2.0 device Kevin Cernekee
2012-06-23  5:14   ` Kevin Cernekee
2012-06-23  5:14 ` Kevin Cernekee [this message]
2012-06-23  5:14   ` [PATCH 7/7] MIPS: BCM63XX: Create platform_device for USBD Kevin Cernekee
2012-07-09  2:58 ` [PATCH 0/7] Prerequisites for BCM63XX UDC driver Kevin Cernekee
2012-07-12  8:57   ` Jonas Gorski
2012-07-12  9:43     ` Florian Fainelli
2012-08-30 18:11 ` John Crispin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e2aacdca2b2e2f5b7ee20563032bf1ee@localhost \
    --to=cernekee@gmail.com \
    --cc=ffainelli@freebox.fr \
    --cc=jonas.gorski@gmail.com \
    --cc=linux-mips@linux-mips.org \
    --cc=mbizon@freebox.fr \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox