Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: alan@lxorguk.ukuu.org.uk (Alan Cox)
To: hakamada@meteor.nsg.sgi.com (Takeshi Hakamada)
Cc: linux@cthulhu.engr.sgi.com
Subject: Re: Mount ext2 filesystem.
Date: Wed, 10 Dec 1997 22:43:26 +0000 (GMT)	[thread overview]
Message-ID: <m0xfuql-0005FsC@lightning.swansea.linux.org.uk> (raw)
In-Reply-To: <199712101335.WAA09888@meteor.nsg.sgi.com> from "Takeshi Hakamada" at Dec 10, 97 10:35:39 pm

> However, when I try to invoke rpm which is made by Alan(libc/ld workaround
> version), I get efs read error as follows:
> 
> efs: read error in indirect extents
> attempt to access beyond end of device
> 08:01 rw=0, want=1207011792, limit=1965937

The efs driver is still very limited and cant handle many file layouts.

> Anyway, why root-be-0.00.cpio.gz doesn't contain rpm binary?
> I think rpm binary should be in root-be-0.00.cpio.gz.

Personally I'd like to see a lot less in a final root-be-0.00. Really it
needs some minimal disk handling tools and rpm. The root-be is a good
start for an NFS root right now.

I used the installer stuff I did to get rpm on the disk by doing

on Linux x86

rpm2cpio rpm-2.3.11.mips.rpm >rpm.cpio

ftping it to Irix and using the install cpio option. Ive been poking at
better installing and talked to a few people about Arc firmware after Ralf
prodded me. Given the horror stories told I think the better option is
to finish producing a tool that takes a compressed ramdisk image (the initrd
image) that is used by setups like the redhat installer and merges it with
the kernel image so the existing bootup stuff can load it

The X86 has memory space problems (install in 8Mb), on the indy blowing
4Mbytes on the install ramdisk is almost an irrelevance.

Alan

WARNING: multiple messages have this Message-ID (diff)
From: alan@lxorguk.ukuu.org.uk (Alan Cox)
To: Takeshi Hakamada <hakamada@meteor.nsg.sgi.com>
Cc: linux@cthulhu.engr.sgi.com
Subject: Re: Mount ext2 filesystem.
Date: Wed, 10 Dec 1997 22:43:26 +0000 (GMT)	[thread overview]
Message-ID: <m0xfuql-0005FsC@lightning.swansea.linux.org.uk> (raw)
Message-ID: <19971210224326._HSZBEVHIOke2hMmxnYehm8-qU59a0Cdp33Re56fKKw@z> (raw)
In-Reply-To: <199712101335.WAA09888@meteor.nsg.sgi.com> from "Takeshi Hakamada" at Dec 10, 97 10:35:39 pm

> However, when I try to invoke rpm which is made by Alan(libc/ld workaround
> version), I get efs read error as follows:
> 
> efs: read error in indirect extents
> attempt to access beyond end of device
> 08:01 rw=0, want=1207011792, limit=1965937

The efs driver is still very limited and cant handle many file layouts.

> Anyway, why root-be-0.00.cpio.gz doesn't contain rpm binary?
> I think rpm binary should be in root-be-0.00.cpio.gz.

Personally I'd like to see a lot less in a final root-be-0.00. Really it
needs some minimal disk handling tools and rpm. The root-be is a good
start for an NFS root right now.

I used the installer stuff I did to get rpm on the disk by doing

on Linux x86

rpm2cpio rpm-2.3.11.mips.rpm >rpm.cpio

ftping it to Irix and using the install cpio option. Ive been poking at
better installing and talked to a few people about Arc firmware after Ralf
prodded me. Given the horror stories told I think the better option is
to finish producing a tool that takes a compressed ramdisk image (the initrd
image) that is used by setups like the redhat installer and merges it with
the kernel image so the existing bootup stuff can load it

The X86 has memory space problems (install in 8Mb), on the indy blowing
4Mbytes on the install ramdisk is almost an irrelevance.

Alan

  parent reply	other threads:[~1997-12-10 22:40 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
1997-12-10 13:35 Mount ext2 filesystem Takeshi Hakamada
1997-12-10 16:43 ` Alex deVries
1997-12-10 17:11   ` ralf
1997-12-10 17:02 ` ralf
1997-12-10 22:43 ` Alan Cox [this message]
1997-12-10 22:43   ` Alan Cox
1997-12-12  0:30   ` Takeshi Hakamada
1997-12-12  1:11     ` Alan Cox
1997-12-12  1:11       ` Alan Cox
1997-12-12  1:16       ` Takeshi Hakamada
1997-12-12  2:52         ` Andrew O'Brien
1997-12-15 12:53           ` Takeshi Hakamada
1997-12-12 15:04         ` Eric Kimminau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m0xfuql-0005FsC@lightning.swansea.linux.org.uk \
    --to=alan@lxorguk.ukuu.org.uk \
    --cc=hakamada@meteor.nsg.sgi.com \
    --cc=linux@cthulhu.engr.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox