Linux-mm Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Usama Arif <usama.arif@linux.dev>
To: "David Hildenbrand (Arm)" <david@kernel.org>,
	Rik van Riel <riel@surriel.com>
Cc: linux-kernel@vger.kernel.org, x86@kernel.org, linux-mm@kvack.org,
	Thomas Gleixner <tglx@kernel.org>, Ingo Molnar <mingo@redhat.com>,
	Dmitry Ilvokhin <d@ilvokhin.com>, Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Lorenzo Stoakes <ljs@kernel.org>,
	"Liam R. Howlett" <liam@infradead.org>,
	Vlastimil Babka <vbabka@kernel.org>,
	Suren Baghdasaryan <surenb@google.com>
Subject: Re: [PATCH 3/3] mm: read remote memory without the mmap lock where possible
Date: Thu, 18 Jun 2026 18:22:51 +0100	[thread overview]
Message-ID: <08a8a7c9-b60d-44f0-9028-f480e318d756@linux.dev> (raw)
In-Reply-To: <929d36a3-f08d-47e5-94c0-b06739dac74c@kernel.org>



On 18/06/2026 18:07, David Hildenbrand (Arm) wrote:
> On 6/18/26 19:01, Usama Arif wrote:
>> On Tue, 16 Jun 2026 15:03:00 -0400 Rik van Riel <riel@surriel.com> wrote:
>>
>>> __access_remote_vm() takes mmap_read_lock() for the entire transfer and
>>> uses get_user_pages_remote(), which faults pages in.  For the common
>>> case of reading memory that is already resident -- /proc/PID/cmdline,
>>> /proc/PID/environ, ptrace PEEK of resident pages -- the mmap lock is
>>> unnecessary and is badly contended on large machines.
>>>
>>> Add an opportunistic, read-only fast path that transfers what it can
>>> without the mmap lock.  For each address it takes the per-VMA lock with
>>> lock_vma_under_rcu(), re-checks the read-side VMA permissions, and uses
>>> folio_walk_start(..., FW_VMA_LOCKED) to grab a short-lived reference to
>>> a present page before copying it out.  Anything non-trivial -- a not-
>>> present page (needs faulting), a hugetlb or VM_IO/VM_PFNMAP mapping, or
>>> a race with a VMA writer -- falls back to the existing mmap_lock path
>>> for the remainder.
>>>
>>> untagged_addr_remote() asserts the mmap lock, so add an unlocked variant
>>> for the fast path; the untag mask is a stable per-mm value.
>>>
>>> Only reads are handled here; writes keep using the slow path.
>>>
>>> Assisted-by: Claude:claude-opus-4-8
>>> Signed-off-by: Rik van Riel <riel@surriel.com>
>>> ---
>>>  arch/x86/include/asm/uaccess_64.h |  12 +++
>>>  include/linux/uaccess.h           |  11 ++
>>>  mm/memory.c                       | 166 +++++++++++++++++++++++++++++-
>>>  3 files changed, 188 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
>>> index 4a52497ba6a1..c6fac900a747 100644
>>> --- a/arch/x86/include/asm/uaccess_64.h
>>> +++ b/arch/x86/include/asm/uaccess_64.h
>>> @@ -51,6 +51,18 @@ static inline unsigned long __untagged_addr_remote(struct mm_struct *mm,
>>>  	(__force __typeof__(addr))__untagged_addr_remote(mm, __addr);	\
>>>  })
>>>  
>>> +/* Same as __untagged_addr_remote(), but usable without the mmap lock held. */
>>> +static inline unsigned long __untagged_addr_remote_unlocked(struct mm_struct *mm,
>>> +							    unsigned long addr)
>>> +{
>>> +	return addr & READ_ONCE((mm)->context.untag_mask);
>>> +}
>>> +
>>> +#define untagged_addr_remote_unlocked(mm, addr)	({			\
>>> +	unsigned long __addr = (__force unsigned long)(addr);		\
>>> +	(__force __typeof__(addr))__untagged_addr_remote_unlocked(mm, __addr); \
>>> +})
>>> +
>>>  #endif
>>>  
>>>  #define valid_user_address(x) \
>>> diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
>>> index 8a264662b242..c8c83372c9d8 100644
>>> --- a/include/linux/uaccess.h
>>> +++ b/include/linux/uaccess.h
>>> @@ -34,6 +34,17 @@
>>>  })
>>>  #endif
>>>  
>>> +/*
>>> + * Like untagged_addr_remote(), but for callers that stabilize @mm by other
>>> + * means (e.g. a per-VMA lock) and must not assert the mmap lock.
>>> + */
>>> +#ifndef untagged_addr_remote_unlocked
>>> +#define untagged_addr_remote_unlocked(mm, addr)	({	\
>>> +	(void)(mm);					\
>>> +	untagged_addr(addr);				\
>>> +})
>>> +#endif
>>> +
>>>  #ifdef masked_user_access_begin
>>>   #define can_do_masked_user_access() 1
>>>  # ifndef masked_user_write_access_begin
>>> diff --git a/mm/memory.c b/mm/memory.c
>>> index 86a973119bd4..0b23b82eaa18 100644
>>> --- a/mm/memory.c
>>> +++ b/mm/memory.c
>>> @@ -42,6 +42,8 @@
>>>  #include <linux/kernel_stat.h>
>>>  #include <linux/mm.h>
>>>  #include <linux/mm_inline.h>
>>> +#include <linux/secretmem.h>
>>> +#include <linux/pagewalk.h>
>>>  #include <linux/sched/mm.h>
>>>  #include <linux/sched/numa_balancing.h>
>>>  #include <linux/sched/task.h>
>>> @@ -7062,6 +7064,153 @@ int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
>>>  EXPORT_SYMBOL_GPL(generic_access_phys);
>>>  #endif
>>>  
>>> +/*
>>> + * The fast path uses folio_walk_start(FW_VMA_LOCKED), which needs the per-VMA
>>> + * lock and RCU-freed page tables to walk page tables without the mmap lock.
>>> + */
>>> +#if defined(CONFIG_PER_VMA_LOCK) && defined(CONFIG_MMU_GATHER_RCU_TABLE_FREE)
>>> +/*
>>> + * Opportunistic lockless fast path for __access_remote_vm() reads.
>>> + *
>>> + * Memory already resident in @mm can be read without taking the heavily
>>> + * contended mmap_lock: a per-VMA lock stabilizes the VMA, and folio_walk_start()
>>> + * with FW_VMA_LOCKED grabs a short-lived reference to a present page via an
>>> + * RCU/PTL protected page table walk (relying on MMU_GATHER_RCU_TABLE_FREE).
>>> + *
>>> + * Anything that would require faulting a page in, touching a hugetlb or
>>> + * VM_IO/VM_PFNMAP mapping, or that races a VMA writer is left to the mmap_lock
>>> + * path in __access_remote_vm().  Only reads are handled here.
>>> + *
>>> + * Returns the number of bytes transferred via the fast path.
>>> + */
>>> +static int access_remote_vm_fast(struct mm_struct *mm, unsigned long addr,
>>> +				 void *buf, int len, unsigned int gup_flags)
>>> +{
>>> +	void *old_buf = buf;
>>> +
>>> +	addr = untagged_addr_remote_unlocked(mm, addr);
>>> +
>>> +	while (len) {
>>> +		struct vm_area_struct *vma;
>>> +		vm_flags_t vm_flags;
>>> +
>>> +		vma = lock_vma_under_rcu(mm, addr);
>>> +		if (!vma)
>>> +			break;
>>> +
>>> +		/*
>>> +		 * Mirror the read-side permission checks of check_vma_flags(),
>>> +		 * and exclude what FW_VMA_LOCKED cannot handle (hugetlb) or what
>>> +		 * needs the ->access() handler (VM_IO/VM_PFNMAP).  Checked once
>>> +		 * per VMA; anything not positively allowed falls back to the
>>> +		 * slow path, which re-validates everything.
>>> +		 */
>>> +		vm_flags = vma->vm_flags;
>>> +		if ((vm_flags & (VM_IO | VM_PFNMAP)) ||
>>> +		    is_vm_hugetlb_page(vma) || vma_is_secretmem(vma) ||
>>> +		    (!(vm_flags & VM_READ) &&
>>> +		     (!(gup_flags & FOLL_FORCE) || !(vm_flags & VM_MAYREAD)))) {
>>> +			vma_end_read(vma);
>>> +			break;
>>> +		}
>>
>> This should also do the FOLL_ANON check from check_vma_flags().
>>
>> check_vma_flags() rejects non-anonymous VMAs when FOLL_ANON is set:
>>
>> 	if ((gup_flags & FOLL_ANON) && !vma_anon)
>> 		return -EFAULT;
> 
> Duplicating GUP logic in a non-GUP file. Splendid. :)
> 

Haha probably just need a common helper.



  reply	other threads:[~2026-06-18 17:23 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-16 19:02 [PATCH 0/3] mm: __access_remote_vm with per-VMA lock Rik van Riel
2026-06-16 19:02 ` [PATCH 1/3] x86/mm: use READ_ONCE/WRITE_ONCE for mm->context.untag_mask Rik van Riel
2026-06-18 16:40   ` Usama Arif
2026-06-16 19:02 ` [PATCH 2/3] mm/pagewalk: let folio_walk_start() run under the per-VMA lock Rik van Riel
2026-06-16 19:03 ` [PATCH 3/3] mm: read remote memory without the mmap lock where possible Rik van Riel
2026-06-17  6:19   ` Suren Baghdasaryan
2026-06-18 17:01   ` Usama Arif
2026-06-18 17:07     ` David Hildenbrand (Arm)
2026-06-18 17:22       ` Usama Arif [this message]
2026-06-17  1:10 ` [PATCH 0/3] mm: __access_remote_vm with per-VMA lock Suren Baghdasaryan
2026-06-17  9:42   ` David Hildenbrand (Arm)
2026-06-17 13:33     ` Suren Baghdasaryan
2026-06-18 20:37       ` David Hildenbrand (Arm)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=08a8a7c9-b60d-44f0-9028-f480e318d756@linux.dev \
    --to=usama.arif@linux.dev \
    --cc=akpm@linux-foundation.org \
    --cc=bp@alien8.de \
    --cc=d@ilvokhin.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=david@kernel.org \
    --cc=liam@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ljs@kernel.org \
    --cc=mingo@redhat.com \
    --cc=riel@surriel.com \
    --cc=surenb@google.com \
    --cc=tglx@kernel.org \
    --cc=vbabka@kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox