From: Baoquan He <baoquan.he@linux.dev>
To: linux-mm@kvack.org
Cc: akpm@linux-foundation.org, chrisl@kernel.org, nphamcs@gmail.com,
kasong@tencent.com, baohua@kernel.org, youngjun.park@lge.com,
hannes@cmpxchg.org, yosry@kernel.org, david@kernel.org,
shikemeng@huaweicloud.com, chengming.zhou@linux.dev,
linux-kernel@vger.kernel.org, Baoquan He <baoquan.he@linux.dev>
Subject: [RFC PATCH 05/11] mm, swap: add xswap_try_shrink and shrink trigger on cluster free
Date: Mon, 27 Jul 2026 22:04:56 +0800 [thread overview]
Message-ID: <20260727140503.1060918-4-baoquan.he@linux.dev> (raw)
In-Reply-To: <20260727140503.1060918-1-baoquan.he@linux.dev>
Add xswap_try_shrink() — the shrink logic that scans backwards from
the tail to find contiguous free clusters, then unmaps full pages
when >= XSWAP_GROW_CLUSTERS free clusters accumulate.
Wire the trigger in __free_cluster(): after a cluster is released to
the free list, call xswap_try_shrink() to attempt tail shrinking.
Also update the XSWAP_GROW_CLUSTERS comment to reflect both grow
and shrink semantics.
Signed-off-by: Baoquan He <baoquan.he@linux.dev>
---
mm/swapfile.c | 48 ++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 44 insertions(+), 4 deletions(-)
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 8a048b2897ce..e0f5fe64de2a 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -51,11 +51,13 @@
#ifdef CONFIG_XSWAP
/*
- * xswap: dynamically grow the cluster_info array via a VM_SPARSE area.
+ * xswap: dynamically grow and shrink the cluster_info array via a
+ * VM_SPARSE area.
*
- * XSWAP_GROW_CLUSTERS is the number of clusters to map in one grow
- * operation. It is set to the number of cluster_info structs that
- * fit in a single page (at least 16), so that the vmalloc page table
+ * XSWAP_GROW_CLUSTERS is the number of clusters to map/unmap in one
+ * grow/shrink operation. It is set to the number of cluster_info
+ * structs that fit in a single page (at least 16), so that the vmalloc
+ * page table
* overhead is proportional to the number of clusters mapped.
*/
#define XSWAP_GROW_CLUSTERS \
@@ -66,6 +68,7 @@ static int xswap_map_clusters(struct swap_info_struct *si,
static void xswap_unmap_clusters(struct swap_info_struct *si,
unsigned long start_idx, unsigned long nr);
static int xswap_check_mapped(pte_t *pte, unsigned long addr, void *data);
+static void xswap_try_shrink(struct swap_info_struct *si);
#endif
static void swap_range_alloc(struct swap_info_struct *si,
@@ -629,6 +632,9 @@ static void __free_cluster(struct swap_info_struct *si, struct swap_cluster_info
swap_cluster_free_table(ci);
move_cluster(si, ci, &si->free_clusters, CLUSTER_FLAG_FREE);
ci->order = 0;
+#ifdef CONFIG_XSWAP
+ xswap_try_shrink(si);
+#endif
}
/*
@@ -3809,6 +3815,40 @@ static int xswap_check_mapped(pte_t *pte, unsigned long addr, void *data)
{
return 1;
}
+
+/*
+ * Try to shrink the cluster_info tail: unmap contiguous free clusters
+ * at the end of the mapped range.
+ */
+static void xswap_try_shrink(struct swap_info_struct *si)
+{
+ struct swap_cluster_info *ci;
+ unsigned long last, idx;
+
+ if (!(si->flags & SWP_XSWAP))
+ return;
+ if (READ_ONCE(si->nr_clusters_mapped) <= 1) /* keep cluster 0 */
+ return;
+
+ /* Find the last non-free cluster from the tail */
+ last = READ_ONCE(si->nr_clusters_mapped);
+ while (last > 1) {
+ idx = last - 1;
+ ci = &si->cluster_info[idx];
+ if (ci->count || ci->flags != CLUSTER_FLAG_FREE)
+ break;
+ last = idx;
+ }
+
+ if (last == si->nr_clusters_mapped)
+ return; /* nothing to shrink */
+
+ /* Only unmap if we can free at least one full page of clusters */
+ if (si->nr_clusters_mapped - last < XSWAP_GROW_CLUSTERS)
+ return;
+
+ xswap_unmap_clusters(si, last, si->nr_clusters_mapped - last);
+}
#endif /* CONFIG_XSWAP */
static int setup_swap_clusters_info(struct swap_info_struct *si,
--
2.54.0
next prev parent reply other threads:[~2026-07-27 14:05 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-27 13:50 [RFC PATCH 00/11] mm, swap: dynamic cluster management for xswap devices Baoquan He
2026-07-27 13:50 ` [RFC PATCH 01/11] mm: xswap support for zswap Baoquan He
2026-07-27 14:04 ` [RFC PATCH 02/11] mm, swap: add CONFIG_XSWAP and xswap fields to swap_info_struct Baoquan He
2026-07-27 14:04 ` [RFC PATCH 03/11] mm, swap: add xswap cluster grow via VM_SPARSE vmalloc Baoquan He
2026-07-27 15:05 ` Nhat Pham
2026-07-27 16:09 ` Chris Li
2026-07-27 14:04 ` [RFC PATCH 04/11] mm, swap: add xswap grow trigger on cluster allocation Baoquan He
2026-07-27 14:04 ` Baoquan He [this message]
2026-07-27 14:04 ` [RFC PATCH 06/11] mm, swap: free backing pages in xswap_unmap_clusters Baoquan He
2026-07-27 14:04 ` [RFC PATCH 07/11] mm, swap: add nr_free_tail for O(1) xswap shrink detection Baoquan He
2026-07-27 14:04 ` [RFC PATCH 08/11] mm, swap: add adjustable runtime ceiling (nr_clusters) for xswap Baoquan He
2026-07-27 14:05 ` [RFC PATCH 09/11] mm, swap: add debugfs knob for xswap per-device cluster limit Baoquan He
2026-07-27 14:05 ` [RFC PATCH 10/11] mm, swap: defer xswap shrink to workqueue to avoid lock recursion Baoquan He
2026-07-27 14:05 ` [RFC PATCH 11/11] mm, swap: serialize xswap map/unmap with a mutex Baoquan He
2026-07-27 15:13 ` Nhat Pham
2026-07-27 15:26 ` [RFC PATCH 02/11] mm, swap: add CONFIG_XSWAP and xswap fields to swap_info_struct Chris Li
2026-07-27 15:48 ` [RFC PATCH 00/11] mm, swap: dynamic cluster management for xswap devices Nhat Pham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260727140503.1060918-4-baoquan.he@linux.dev \
--to=baoquan.he@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=chengming.zhou@linux.dev \
--cc=chrisl@kernel.org \
--cc=david@kernel.org \
--cc=hannes@cmpxchg.org \
--cc=kasong@tencent.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nphamcs@gmail.com \
--cc=shikemeng@huaweicloud.com \
--cc=yosry@kernel.org \
--cc=youngjun.park@lge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).