From: Baoquan He <baoquan.he@linux.dev>
To: linux-mm@kvack.org
Cc: akpm@linux-foundation.org, chrisl@kernel.org, nphamcs@gmail.com,
kasong@tencent.com, baohua@kernel.org, youngjun.park@lge.com,
hannes@cmpxchg.org, yosry@kernel.org, david@kernel.org,
shikemeng@huaweicloud.com, chengming.zhou@linux.dev,
linux-kernel@vger.kernel.org, Baoquan He <baoquan.he@linux.dev>
Subject: [RFC PATCH 09/11] mm, swap: add debugfs knob for xswap per-device cluster limit
Date: Mon, 27 Jul 2026 22:05:00 +0800 [thread overview]
Message-ID: <20260727140503.1060918-8-baoquan.he@linux.dev> (raw)
In-Reply-To: <20260727140503.1060918-1-baoquan.he@linux.dev>
Add a per-device debugfs file for runtime adjustment of xswap cluster
limit:
/sys/kernel/debug/xswap/type<N>_cluster_limit
Reading shows the current ceiling (in clusters); writing sets it
(clamped to [0, nr_clusters_max]). Setting below nr_clusters_mapped
triggers an immediate shrink check via xswap_try_shrink().
The debugfs entry is created at swapon and removed at swapoff.
Signed-off-by: Baoquan He <baoquan.he@linux.dev>
---
include/linux/swap.h | 1 +
mm/swapfile.c | 97 +++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 97 insertions(+), 1 deletion(-)
diff --git a/include/linux/swap.h b/include/linux/swap.h
index e4512aeead36..ebcd5eaa7924 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -254,6 +254,7 @@ struct swap_info_struct {
unsigned long nr_clusters; /* current growth ceiling (⤠nr_clusters_max) */
unsigned long nr_clusters_mapped; /* currently mapped cluster count */
unsigned long nr_free_tail; /* contiguous free clusters at tail */
+ struct dentry *debugfs_entry; /* debugfs: type<N>_max_clusters */
#endif
struct list_head free_clusters; /* free clusters list */
struct list_head full_clusters; /* full clusters list */
diff --git a/mm/swapfile.c b/mm/swapfile.c
index f57823d6449f..af62981506d3 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -48,6 +48,9 @@
#include "swap_table.h"
#include "internal.h"
#include "swap.h"
+#include <linux/debugfs.h>
+
+static DEFINE_SPINLOCK(swap_lock);
#ifdef CONFIG_XSWAP
/*
@@ -63,6 +66,8 @@
#define XSWAP_GROW_CLUSTERS \
max_t(unsigned long, PAGE_SIZE / sizeof(struct swap_cluster_info), 16)
+static struct dentry *xswap_debugfs_root;
+
static int xswap_map_clusters(struct swap_info_struct *si,
unsigned long start_idx, unsigned long nr);
static void xswap_unmap_clusters(struct swap_info_struct *si,
@@ -73,6 +78,90 @@ static void xswap_update_free_tail(struct swap_info_struct *si,
unsigned long freed_idx);
static void xswap_try_shrink(struct swap_info_struct *si);
+/*
+ * debugfs read/write for per-device max cluster count.
+ * Shows/sets si->nr_clusters (current growth ceiling), clamped to
+ * [0, si->nr_clusters_max].
+ */
+static ssize_t xswap_max_clusters_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct swap_info_struct *si = file->private_data;
+ char tmp[32];
+ int len;
+
+ len = snprintf(tmp, sizeof(tmp), "%lu\n", READ_ONCE(si->nr_clusters));
+ return simple_read_from_buffer(buf, count, ppos, tmp, len);
+}
+
+static ssize_t xswap_max_clusters_write(struct file *file,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct swap_info_struct *si = file->private_data;
+ unsigned long val, new_pages;
+ int err;
+
+ err = kstrtoul_from_user(buf, count, 0, &val);
+ if (err)
+ return err;
+
+ if (val > si->nr_clusters_max)
+ val = si->nr_clusters_max;
+
+ spin_lock(&si->lock);
+ si->nr_clusters = val;
+ spin_unlock(&si->lock);
+
+ /* Keep the visible swap size in sync with the new ceiling. */
+ new_pages = min_t(unsigned long, val * SWAPFILE_CLUSTER, si->max);
+ if (new_pages)
+ new_pages--;
+ if (new_pages != si->pages) {
+ long delta = (long)new_pages - (long)si->pages;
+
+ spin_lock(&swap_lock);
+ si->pages = new_pages;
+ atomic_long_add(delta, &nr_swap_pages);
+ total_swap_pages += delta;
+ spin_unlock(&swap_lock);
+ }
+
+ /*
+ * Lowering the ceiling may make tail clusters eligible for
+ * shrinking. Trigger an immediate check.
+ */
+ xswap_try_shrink(si);
+
+ return count;
+}
+
+static const struct file_operations xswap_debugfs_fops = {
+ .read = xswap_max_clusters_read,
+ .write = xswap_max_clusters_write,
+ .open = simple_open,
+ .llseek = default_llseek,
+};
+
+static void xswap_debugfs_add(struct swap_info_struct *si)
+{
+ char name[32];
+
+ if (!xswap_debugfs_root)
+ return;
+
+ snprintf(name, sizeof(name), "type%d_cluster_limit", si->type);
+ si->debugfs_entry = debugfs_create_file(name, 0644, xswap_debugfs_root,
+ si, &xswap_debugfs_fops);
+}
+
+static void xswap_debugfs_del(struct swap_info_struct *si)
+{
+ debugfs_remove(si->debugfs_entry);
+ si->debugfs_entry = NULL;
+}
+
+
#endif
static void swap_range_alloc(struct swap_info_struct *si,
@@ -89,7 +178,6 @@ static void move_cluster(struct swap_info_struct *si,
*
* Also protects swap_active_head total_swap_pages, and the SWP_WRITEOK flag.
*/
-static DEFINE_SPINLOCK(swap_lock);
static unsigned int nr_swapfiles;
atomic_long_t nr_swap_pages;
atomic_t nr_real_swapfiles;
@@ -3147,6 +3235,7 @@ static void free_swap_cluster_info(struct swap_info_struct *si)
#ifdef CONFIG_XSWAP
if (si->flags & SWP_XSWAP) {
+ xswap_debugfs_del(si);
/* Unmap all mapped clusters and free the VM_SPARSE area */
if (si->nr_clusters_mapped > 0)
xswap_unmap_clusters(si, 0, si->nr_clusters_mapped);
@@ -4048,6 +4137,7 @@ static int setup_swap_clusters_info(struct swap_info_struct *si,
/* All mapped clusters except cluster 0 are free at the tail */
si->nr_free_tail = si->nr_clusters_mapped - 1;
+ xswap_debugfs_add(si);
return 0;
err_unmap:
@@ -4464,6 +4554,11 @@ static int __init swapfile_init(void)
if (swapfile_maximum_size >= (1UL << SWP_MIG_TOTAL_BITS))
swap_migration_ad_supported = true;
#endif /* CONFIG_MIGRATION */
+
+#ifdef CONFIG_XSWAP
+ xswap_debugfs_root = debugfs_create_dir("xswap", NULL);
+#endif
+
return 0;
}
subsys_initcall(swapfile_init);
--
2.54.0
next prev parent reply other threads:[~2026-07-27 14:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-27 13:50 [RFC PATCH 00/11] mm, swap: dynamic cluster management for xswap devices Baoquan He
2026-07-27 13:50 ` [RFC PATCH 01/11] mm: xswap support for zswap Baoquan He
2026-07-27 14:04 ` [RFC PATCH 02/11] mm, swap: add CONFIG_XSWAP and xswap fields to swap_info_struct Baoquan He
2026-07-27 14:04 ` [RFC PATCH 03/11] mm, swap: add xswap cluster grow via VM_SPARSE vmalloc Baoquan He
2026-07-27 15:05 ` Nhat Pham
2026-07-27 14:04 ` [RFC PATCH 04/11] mm, swap: add xswap grow trigger on cluster allocation Baoquan He
2026-07-27 14:04 ` [RFC PATCH 05/11] mm, swap: add xswap_try_shrink and shrink trigger on cluster free Baoquan He
2026-07-27 14:04 ` [RFC PATCH 06/11] mm, swap: free backing pages in xswap_unmap_clusters Baoquan He
2026-07-27 14:04 ` [RFC PATCH 07/11] mm, swap: add nr_free_tail for O(1) xswap shrink detection Baoquan He
2026-07-27 14:04 ` [RFC PATCH 08/11] mm, swap: add adjustable runtime ceiling (nr_clusters) for xswap Baoquan He
2026-07-27 14:05 ` Baoquan He [this message]
2026-07-27 14:05 ` [RFC PATCH 10/11] mm, swap: defer xswap shrink to workqueue to avoid lock recursion Baoquan He
2026-07-27 14:05 ` [RFC PATCH 11/11] mm, swap: serialize xswap map/unmap with a mutex Baoquan He
2026-07-27 15:13 ` Nhat Pham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260727140503.1060918-8-baoquan.he@linux.dev \
--to=baoquan.he@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=chengming.zhou@linux.dev \
--cc=chrisl@kernel.org \
--cc=david@kernel.org \
--cc=hannes@cmpxchg.org \
--cc=kasong@tencent.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nphamcs@gmail.com \
--cc=shikemeng@huaweicloud.com \
--cc=yosry@kernel.org \
--cc=youngjun.park@lge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox