* Writing emmc write-protected area gives no error, though the protection is working
@ 2012-04-17 3:35 Jongman Heo
0 siblings, 0 replies; only message in thread
From: Jongman Heo @ 2012-04-17 3:35 UTC (permalink / raw)
To: linux-mmc
Hi all,
I've tested (temporary) write-protection feature of eMMC flash.
#1. set the temporary write-protection (using CMD28)
#2. write data to the write-protected area (using dd or similar)
-> gives no error at all.
#3. checking the area confirms that write-protection is working, data is not over-written.
In step #2, I expected some error return, but no. Obviously write-protection is working, but user can't see any visible output.
Shouldn't write(2) return some error for above case?
Jongman.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-04-17 3:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-17 3:35 Writing emmc write-protected area gives no error, though the protection is working Jongman Heo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox