Linux MultiMedia Card development
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Avri Altman <avri.altman@wdc.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	linux-mmc@vger.kernel.org
Cc: Ricky WU <ricky_wu@realtek.com>, Shawn Lin <shawn.lin@rock-chips.com>
Subject: Re: [PATCH v6 0/9] Add SDUC Support
Date: Fri, 6 Sep 2024 14:10:22 +0300	[thread overview]
Message-ID: <1eee4711-7a42-4c9c-a092-9bb6f69ee3a9@intel.com> (raw)
In-Reply-To: <20240904145256.3670679-1-avri.altman@wdc.com>

On 4/09/24 17:52, Avri Altman wrote:
> Ultra Capacity SD cards (SDUC) was already introduced in SD7.0.  Those
> cards support capacity larger than 2TB and up to including 128TB. Thus,
> the address range of the card expands beyond the 32-bit command
> argument. To that end, a new command - CMD22 is defined, to carry the
> extra 6-bit upper part of the 38-bit block address that enable access to
> 128TB memory space.
> 
> SDUC capacity is agnostic to the interface mode: UHS-I and UHS-II – Same
> as SDXC.
> 
> The spec defines several extensions/modifications to the current SDXC
> cards, which we address in patches 1 - 10.  Otherwise requirements are
> out-of-scope of this change.  Specifically, CMDQ (CMD44+CMD45), and
> Extension for Video Speed Class (CMD20).
> 
> First publication of SDUC was in [1].  This series was developed and
> tested separately from [1] and does not borrow from it.
> 
> [1] https://lwn.net/Articles/982566/
> 
> ---
> Changes in v6:
>  - Remove Ricky's tested-by tag - the series has changed greatly
>  - Call mmc_send_ext_addr from mmc_start_request (Adrian)
> 
> Changes in v5:
>  - leave out the mask in mmc_send_ext_addr (Adrian)
>  - leave out close-ended SDUC support
>  - remove 500msec write delay as there is no busy indication (Adrian)
>  - disable mmc-test for SDUC
>  - move enabling SDUC to the last patch (Adrian)
> 
> Changes in v4:
>  - Squash patches 1 & 2 (Ulf)
>  - Amend SD_OCR_2T to SD_OCR_CCS in mmc_sd_get_cid (Ulf)
>  - Use card state instead of caps2 (Ricky & Ulf)
>  - Switch patches 5 & 6 (Ulf)
> 
> Changes in v3:
>  - Some more kernel test robot fixes
>  - Fix a typo in a commit log (Ricky WU)
>  - Fix ACMD22 returned value
>  - Add 'Tested-by' tag for the whole series (Ricky WU)
> 
> Changes in v2:
>  - Attend kernel test robot warnings
> 
> ---
> 
> Avri Altman (9):
>   mmc: sd: SDUC Support Recognition
>   mmc: sd: Add Extension memory addressing
>   mmc: core: Add open-ended Ext memory addressing
>   mmc: core: Don't use close-ended rw for SDUC
>   mmc: core: Allow mmc erase to carry large addresses
>   mmc: core: Add Ext memory addressing for erase
>   mmc: core: Adjust ACMD22 to SDUC
>   mmc: core: Disable SDUC for mmc_test
>   mmc: core: Enable SDUC
> 
>  drivers/mmc/core/block.c    | 43 +++++++++++++++++++++++-------
>  drivers/mmc/core/bus.c      |  4 ++-
>  drivers/mmc/core/card.h     |  3 +++
>  drivers/mmc/core/core.c     | 52 +++++++++++++++++++++++++------------
>  drivers/mmc/core/core.h     | 16 +++++++++---
>  drivers/mmc/core/mmc_test.c |  7 +++++
>  drivers/mmc/core/sd.c       | 36 ++++++++++++++++---------
>  drivers/mmc/core/sd.h       |  2 +-
>  drivers/mmc/core/sd_ops.c   | 16 ++++++++++++
>  drivers/mmc/core/sd_ops.h   |  1 +
>  drivers/mmc/core/sdio.c     |  2 +-
>  include/linux/mmc/card.h    |  2 +-
>  include/linux/mmc/core.h    |  5 ++++
>  include/linux/mmc/sd.h      |  4 +++
>  14 files changed, 146 insertions(+), 47 deletions(-)
> 

I made a few comments, but this looks good
otherwise.


      parent reply	other threads:[~2024-09-06 11:10 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-04 14:52 [PATCH v6 0/9] Add SDUC Support Avri Altman
2024-09-04 14:52 ` [PATCH v6 1/9] mmc: sd: SDUC Support Recognition Avri Altman
2024-09-06  6:39   ` Adrian Hunter
2024-09-06  8:10     ` Avri Altman
2024-09-04 14:52 ` [PATCH v6 2/9] mmc: sd: Add Extension memory addressing Avri Altman
2024-09-04 14:52 ` [PATCH v6 3/9] mmc: core: Add open-ended Ext " Avri Altman
2024-09-04 22:13   ` Christian Loehle
2024-09-05  6:12     ` Avri Altman
2024-09-05  7:25       ` Adrian Hunter
2024-09-05  8:27       ` Christian Loehle
2024-09-05  9:47         ` Avri Altman
2024-09-06  8:02   ` Adrian Hunter
2024-09-06  8:20     ` Avri Altman
2024-09-06  8:33       ` Adrian Hunter
2024-09-06 10:11         ` Avri Altman
2024-09-04 14:52 ` [PATCH v6 4/9] mmc: core: Don't use close-ended rw for SDUC Avri Altman
2024-09-04 14:52 ` [PATCH v6 5/9] mmc: core: Allow mmc erase to carry large addresses Avri Altman
2024-09-04 14:52 ` [PATCH v6 6/9] mmc: core: Add Ext memory addressing for erase Avri Altman
2024-09-06 10:06   ` Adrian Hunter
2024-09-06 10:14     ` Avri Altman
2024-09-04 14:52 ` [PATCH v6 7/9] mmc: core: Adjust ACMD22 to SDUC Avri Altman
2024-09-06 10:57   ` Adrian Hunter
2024-09-06 11:07     ` Avri Altman
2024-09-04 14:52 ` [PATCH v6 8/9] mmc: core: Disable SDUC for mmc_test Avri Altman
2024-09-06 10:10   ` Adrian Hunter
2024-09-06 10:15     ` Avri Altman
2024-09-04 14:52 ` [PATCH v6 9/9] mmc: core: Enable SDUC Avri Altman
2024-09-06 11:10 ` Adrian Hunter [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1eee4711-7a42-4c9c-a092-9bb6f69ee3a9@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=avri.altman@wdc.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ricky_wu@realtek.com \
    --cc=shawn.lin@rock-chips.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox