[PATCH v3 00/13] Add CMU/RMU/DMA/MMC/I2C support for Actions Semi

[PATCH v3 00/13] Add CMU/RMU/DMA/MMC/I2C support for Actions Semi

[Cristian Ciocaltea]

Hi,

This patchset brings a series of improvements for the Actions Semi S500
SoCs family, by adding support for Clock & Reset Management Units, DMA,
MMC, I2C & SIRQ controllers.

Please note the patches consist mostly of DTS and bindings/compatibles
changes, since all the work they depend on has been already merged,
i.e. clock fixes/additions, pinctrl driver, sirq driver.

For the moment, I have only enabled the features I could test on
RoseapplePi SBC.

Thanks,
Cristi

Changes in v3:
- Squashed 'arm: dts: owl-s500-roseapplepi: Use UART clock from CMU' with
  'arm: dts: owl-s500: Set CMU clocks for UARTs', according to Mani's review
- Rebased series on v5.11-rc1 and dropped the already merged patches:
 * dt-bindings: mmc: owl: Add compatible string for Actions Semi S500 SoC
 * dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
 * MAINTAINERS: Update entry for Actions Semi Owl I2C binding
 * i2c: owl: Add compatible for the Actions Semi S500 I2C controller

Changes in v2:
- Added new bindings/compatibles for S500 DMA, MMC & I2C controllers
- Added support for the SIRQ controller
- Added new entries in MAINTAINERS
- Updated naming of some patches in v1

Cristian Ciocaltea (13):
  arm: dts: owl-s500: Add Clock Management Unit
  arm: dts: owl-s500: Set CMU clocks for UARTs
  arm: dts: owl-s500: Add Reset controller
  dt-bindings: dma: owl: Add compatible string for Actions Semi S500 SoC
  dmaengine: owl: Add compatible for the Actions Semi S500 DMA
    controller
  arm: dts: owl-s500: Add DMA controller
  arm: dts: owl-s500: Add pinctrl & GPIO support
  arm: dts: owl-s500: Add MMC support
  arm: dts: owl-s500: Add I2C support
  arm: dts: owl-s500: Add SIRQ controller
  arm: dts: owl-s500-roseapplepi: Add uSD support
  arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
  MAINTAINERS: Add linux-actions ML for Actions Semi Arch

 .../devicetree/bindings/dma/owl-dma.yaml      |   7 +-
 MAINTAINERS                                   |   1 +
 arch/arm/boot/dts/owl-s500-cubieboard6.dts    |   7 -
 .../arm/boot/dts/owl-s500-guitar-bb-rev-b.dts |   7 -
 .../arm/boot/dts/owl-s500-labrador-base-m.dts |   7 -
 arch/arm/boot/dts/owl-s500-roseapplepi.dts    |  97 +++++++++++-
 arch/arm/boot/dts/owl-s500-sparky.dts         |   7 -
 arch/arm/boot/dts/owl-s500.dtsi               | 140 ++++++++++++++++++
 drivers/dma/owl-dma.c                         |   3 +-
 9 files changed, 239 insertions(+), 37 deletions(-)

-- 
2.30.0

[PATCH v3 08/13] arm: dts: owl-s500: Add MMC support

[Cristian Ciocaltea]

Add MMC controller nodes for Actions Semi S500 SoC, in order to
facilitate access to SD/EMMC/SDIO cards.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
Changes in v3:
 - Added Reviewed-by tags from Ulf and Mani

 arch/arm/boot/dts/owl-s500.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index b16172615db0..7af7c9e1119d 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -241,5 +241,38 @@ dma: dma-controller@b0260000 {
 			clocks = <&cmu CLK_DMAC>;
 			power-domains = <&sps S500_PD_DMA>;
 		};
+
+		mmc0: mmc@b0230000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0230000 0x38>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@b0234000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0234000 0x38>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@b0238000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0238000 0x38>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
 	};
 };
-- 
2.30.0

Re: [PATCH v3 00/13] Add CMU/RMU/DMA/MMC/I2C support for Actions Semi

[Manivannan Sadhasivam]

On Tue, Dec 29, 2020 at 11:17:15PM +0200, Cristian Ciocaltea wrote:
> Hi,
> 
> This patchset brings a series of improvements for the Actions Semi S500
> SoCs family, by adding support for Clock & Reset Management Units, DMA,
> MMC, I2C & SIRQ controllers.
> 
> Please note the patches consist mostly of DTS and bindings/compatibles
> changes, since all the work they depend on has been already merged,
> i.e. clock fixes/additions, pinctrl driver, sirq driver.
> 
> For the moment, I have only enabled the features I could test on
> RoseapplePi SBC.
> 

Applied all patches except the 2 dmaengine patches for v5.12. Andreas, please
let me know if you want to do the PR this time. Else I'll proceed.

Thanks,
Mani

> Thanks,
> Cristi
> 
> Changes in v3:
> - Squashed 'arm: dts: owl-s500-roseapplepi: Use UART clock from CMU' with
>   'arm: dts: owl-s500: Set CMU clocks for UARTs', according to Mani's review
> - Rebased series on v5.11-rc1 and dropped the already merged patches:
>  * dt-bindings: mmc: owl: Add compatible string for Actions Semi S500 SoC
>  * dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
>  * MAINTAINERS: Update entry for Actions Semi Owl I2C binding
>  * i2c: owl: Add compatible for the Actions Semi S500 I2C controller
> 
> Changes in v2:
> - Added new bindings/compatibles for S500 DMA, MMC & I2C controllers
> - Added support for the SIRQ controller
> - Added new entries in MAINTAINERS
> - Updated naming of some patches in v1
> 
> Cristian Ciocaltea (13):
>   arm: dts: owl-s500: Add Clock Management Unit
>   arm: dts: owl-s500: Set CMU clocks for UARTs
>   arm: dts: owl-s500: Add Reset controller
>   dt-bindings: dma: owl: Add compatible string for Actions Semi S500 SoC
>   dmaengine: owl: Add compatible for the Actions Semi S500 DMA
>     controller
>   arm: dts: owl-s500: Add DMA controller
>   arm: dts: owl-s500: Add pinctrl & GPIO support
>   arm: dts: owl-s500: Add MMC support
>   arm: dts: owl-s500: Add I2C support
>   arm: dts: owl-s500: Add SIRQ controller
>   arm: dts: owl-s500-roseapplepi: Add uSD support
>   arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
>   MAINTAINERS: Add linux-actions ML for Actions Semi Arch
> 
>  .../devicetree/bindings/dma/owl-dma.yaml      |   7 +-
>  MAINTAINERS                                   |   1 +
>  arch/arm/boot/dts/owl-s500-cubieboard6.dts    |   7 -
>  .../arm/boot/dts/owl-s500-guitar-bb-rev-b.dts |   7 -
>  .../arm/boot/dts/owl-s500-labrador-base-m.dts |   7 -
>  arch/arm/boot/dts/owl-s500-roseapplepi.dts    |  97 +++++++++++-
>  arch/arm/boot/dts/owl-s500-sparky.dts         |   7 -
>  arch/arm/boot/dts/owl-s500.dtsi               | 140 ++++++++++++++++++
>  drivers/dma/owl-dma.c                         |   3 +-
>  9 files changed, 239 insertions(+), 37 deletions(-)
> 
> -- 
> 2.30.0
> 

Re: [PATCH v3 00/13] Add CMU/RMU/DMA/MMC/I2C support for Actions Semi

[Cristian Ciocaltea]

On Thu, Dec 31, 2020 at 01:24:35PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Dec 29, 2020 at 11:17:15PM +0200, Cristian Ciocaltea wrote:
> > Hi,
> > 
> > This patchset brings a series of improvements for the Actions Semi S500
> > SoCs family, by adding support for Clock & Reset Management Units, DMA,
> > MMC, I2C & SIRQ controllers.
> > 
> > Please note the patches consist mostly of DTS and bindings/compatibles
> > changes, since all the work they depend on has been already merged,
> > i.e. clock fixes/additions, pinctrl driver, sirq driver.
> > 
> > For the moment, I have only enabled the features I could test on
> > RoseapplePi SBC.
> > 
> 
> Applied all patches except the 2 dmaengine patches for v5.12. Andreas, please
> let me know if you want to do the PR this time. Else I'll proceed.

Thank you, Mani!
The dmaengine patches should be picked up by Vinod, right?

> Thanks,
> Mani
> 
> > Thanks,
> > Cristi
> > 
> > Changes in v3:
> > - Squashed 'arm: dts: owl-s500-roseapplepi: Use UART clock from CMU' with
> >   'arm: dts: owl-s500: Set CMU clocks for UARTs', according to Mani's review
> > - Rebased series on v5.11-rc1 and dropped the already merged patches:
> >  * dt-bindings: mmc: owl: Add compatible string for Actions Semi S500 SoC
> >  * dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
> >  * MAINTAINERS: Update entry for Actions Semi Owl I2C binding
> >  * i2c: owl: Add compatible for the Actions Semi S500 I2C controller
> > 
> > Changes in v2:
> > - Added new bindings/compatibles for S500 DMA, MMC & I2C controllers
> > - Added support for the SIRQ controller
> > - Added new entries in MAINTAINERS
> > - Updated naming of some patches in v1
> > 
> > Cristian Ciocaltea (13):
> >   arm: dts: owl-s500: Add Clock Management Unit
> >   arm: dts: owl-s500: Set CMU clocks for UARTs
> >   arm: dts: owl-s500: Add Reset controller
> >   dt-bindings: dma: owl: Add compatible string for Actions Semi S500 SoC
> >   dmaengine: owl: Add compatible for the Actions Semi S500 DMA
> >     controller
> >   arm: dts: owl-s500: Add DMA controller
> >   arm: dts: owl-s500: Add pinctrl & GPIO support
> >   arm: dts: owl-s500: Add MMC support
> >   arm: dts: owl-s500: Add I2C support
> >   arm: dts: owl-s500: Add SIRQ controller
> >   arm: dts: owl-s500-roseapplepi: Add uSD support
> >   arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
> >   MAINTAINERS: Add linux-actions ML for Actions Semi Arch
> > 
> >  .../devicetree/bindings/dma/owl-dma.yaml      |   7 +-
> >  MAINTAINERS                                   |   1 +
> >  arch/arm/boot/dts/owl-s500-cubieboard6.dts    |   7 -
> >  .../arm/boot/dts/owl-s500-guitar-bb-rev-b.dts |   7 -
> >  .../arm/boot/dts/owl-s500-labrador-base-m.dts |   7 -
> >  arch/arm/boot/dts/owl-s500-roseapplepi.dts    |  97 +++++++++++-
> >  arch/arm/boot/dts/owl-s500-sparky.dts         |   7 -
> >  arch/arm/boot/dts/owl-s500.dtsi               | 140 ++++++++++++++++++
> >  drivers/dma/owl-dma.c                         |   3 +-
> >  9 files changed, 239 insertions(+), 37 deletions(-)
> > 
> > -- 
> > 2.30.0
> > 

Re: [PATCH v3 00/13] Add CMU/RMU/DMA/MMC/I2C support for Actions Semi

[Manivannan Sadhasivam]

On 31 December 2020 2:42:02 PM IST, Cristian Ciocaltea <cristian.ciocaltea@gmail.com> wrote:
>On Thu, Dec 31, 2020 at 01:24:35PM +0530, Manivannan Sadhasivam wrote:
>> On Tue, Dec 29, 2020 at 11:17:15PM +0200, Cristian Ciocaltea wrote:
>> > Hi,
>> > 
>> > This patchset brings a series of improvements for the Actions Semi
>S500
>> > SoCs family, by adding support for Clock & Reset Management Units,
>DMA,
>> > MMC, I2C & SIRQ controllers.
>> > 
>> > Please note the patches consist mostly of DTS and
>bindings/compatibles
>> > changes, since all the work they depend on has been already merged,
>> > i.e. clock fixes/additions, pinctrl driver, sirq driver.
>> > 
>> > For the moment, I have only enabled the features I could test on
>> > RoseapplePi SBC.
>> > 
>> 
>> Applied all patches except the 2 dmaengine patches for v5.12.
>Andreas, please
>> let me know if you want to do the PR this time. Else I'll proceed.
>
>Thank you, Mani!
>The dmaengine patches should be picked up by Vinod, right?
>

Yes! Vinod is just back from vacation, so he will :) 

Thanks, 
Mani

>> Thanks,
>> Mani
>> 
>> > Thanks,
>> > Cristi
>> > 
>> > Changes in v3:
>> > - Squashed 'arm: dts: owl-s500-roseapplepi: Use UART clock from
>CMU' with
>> >   'arm: dts: owl-s500: Set CMU clocks for UARTs', according to
>Mani's review
>> > - Rebased series on v5.11-rc1 and dropped the already merged
>patches:
>> >  * dt-bindings: mmc: owl: Add compatible string for Actions Semi
>S500 SoC
>> >  * dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a
>schema
>> >  * MAINTAINERS: Update entry for Actions Semi Owl I2C binding
>> >  * i2c: owl: Add compatible for the Actions Semi S500 I2C
>controller
>> > 
>> > Changes in v2:
>> > - Added new bindings/compatibles for S500 DMA, MMC & I2C
>controllers
>> > - Added support for the SIRQ controller
>> > - Added new entries in MAINTAINERS
>> > - Updated naming of some patches in v1
>> > 
>> > Cristian Ciocaltea (13):
>> >   arm: dts: owl-s500: Add Clock Management Unit
>> >   arm: dts: owl-s500: Set CMU clocks for UARTs
>> >   arm: dts: owl-s500: Add Reset controller
>> >   dt-bindings: dma: owl: Add compatible string for Actions Semi
>S500 SoC
>> >   dmaengine: owl: Add compatible for the Actions Semi S500 DMA
>> >     controller
>> >   arm: dts: owl-s500: Add DMA controller
>> >   arm: dts: owl-s500: Add pinctrl & GPIO support
>> >   arm: dts: owl-s500: Add MMC support
>> >   arm: dts: owl-s500: Add I2C support
>> >   arm: dts: owl-s500: Add SIRQ controller
>> >   arm: dts: owl-s500-roseapplepi: Add uSD support
>> >   arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
>> >   MAINTAINERS: Add linux-actions ML for Actions Semi Arch
>> > 
>> >  .../devicetree/bindings/dma/owl-dma.yaml      |   7 +-
>> >  MAINTAINERS                                   |   1 +
>> >  arch/arm/boot/dts/owl-s500-cubieboard6.dts    |   7 -
>> >  .../arm/boot/dts/owl-s500-guitar-bb-rev-b.dts |   7 -
>> >  .../arm/boot/dts/owl-s500-labrador-base-m.dts |   7 -
>> >  arch/arm/boot/dts/owl-s500-roseapplepi.dts    |  97 +++++++++++-
>> >  arch/arm/boot/dts/owl-s500-sparky.dts         |   7 -
>> >  arch/arm/boot/dts/owl-s500.dtsi               | 140
>++++++++++++++++++
>> >  drivers/dma/owl-dma.c                         |   3 +-
>> >  9 files changed, 239 insertions(+), 37 deletions(-)
>> > 
>> > -- 
>> > 2.30.0
>> > 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.