[PATCH 01/11] mmc: core: Use BIT() macro

[Marek Vasut <marex@denx.de>]

Use the BIT(n) macro instead of (1<<n), no functional change.
Regex 's@(1 \?<< \?\([0-9A-Z_]\+\))@BIT(\1)' .

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bo Liu <liubo03@inspur.com>
Cc: Deren Wu <deren.wu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: linux-mmc@vger.kernel.org
---
 include/linux/mmc/core.h | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 6efec0b9820c1..23db84630ae8a 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -26,16 +26,16 @@ enum mmc_blk_status {
 struct mmc_command {
 	u32			opcode;
 	u32			arg;
-#define MMC_CMD23_ARG_REL_WR	(1 << 31)
+#define MMC_CMD23_ARG_REL_WR	BIT(31)
 #define MMC_CMD23_ARG_PACKED	((0 << 31) | (1 << 30))
-#define MMC_CMD23_ARG_TAG_REQ	(1 << 29)
+#define MMC_CMD23_ARG_TAG_REQ	BIT(29)
 	u32			resp[4];
 	unsigned int		flags;		/* expected response type */
-#define MMC_RSP_PRESENT	(1 << 0)
-#define MMC_RSP_136	(1 << 1)		/* 136 bit response */
-#define MMC_RSP_CRC	(1 << 2)		/* expect valid crc */
-#define MMC_RSP_BUSY	(1 << 3)		/* card may send busy */
-#define MMC_RSP_OPCODE	(1 << 4)		/* response contains opcode */
+#define MMC_RSP_PRESENT	BIT(0)
+#define MMC_RSP_136	BIT(1)		/* 136 bit response */
+#define MMC_RSP_CRC	BIT(2)		/* expect valid crc */
+#define MMC_RSP_BUSY	BIT(3)		/* card may send busy */
+#define MMC_RSP_OPCODE	BIT(4)		/* response contains opcode */
 
 #define MMC_CMD_MASK	(3 << 5)		/* non-SPI command type */
 #define MMC_CMD_AC	(0 << 5)
@@ -43,10 +43,10 @@ struct mmc_command {
 #define MMC_CMD_BC	(2 << 5)
 #define MMC_CMD_BCR	(3 << 5)
 
-#define MMC_RSP_SPI_S1	(1 << 7)		/* one status byte */
-#define MMC_RSP_SPI_S2	(1 << 8)		/* second byte */
-#define MMC_RSP_SPI_B4	(1 << 9)		/* four data bytes */
-#define MMC_RSP_SPI_BUSY (1 << 10)		/* card may send busy */
+#define MMC_RSP_SPI_S1	BIT(7)		/* one status byte */
+#define MMC_RSP_SPI_S2	BIT(8)		/* second byte */
+#define MMC_RSP_SPI_B4	BIT(9)		/* four data bytes */
+#define MMC_RSP_SPI_BUSY BIT(10)		/* card may send busy */
 
 /*
  * These are the native response types, and correspond to valid bit
-- 
2.39.2