From: Judith Mendez <jm@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
<linux-mmc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Andrew Davis <afd@ti.com>, Udit Kumar <u-kumar1@ti.com>,
Roger Quadros <rogerq@kernel.org>, <devicetree@vger.kernel.org>,
Randolph Sapp <rs@ti.com>
Subject: [RFC PATCH 12/13] arm64: dts: ti: k3-am6*: Remove DLL properties for soft phys
Date: Tue, 30 Jan 2024 18:37:13 -0600 [thread overview]
Message-ID: <20240131003714.2779593-13-jm@ti.com> (raw)
In-Reply-To: <20240131003714.2779593-1-jm@ti.com>
Remove DLL properties which are not applicable for soft phys
since they do not have a DLL to enable.
Signed-off-by: Judith Mendez <jm@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 3 ---
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 3 ---
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 1 -
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 -
9 files changed, 14 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index d10a02ede06c..ca825088970f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -561,7 +561,6 @@ sdhci0: mmc@fa10000 {
assigned-clock-parents = <&k3_clks 57 8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- ti,trm-icp = <0x2>;
bus-width = <8>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
@@ -577,7 +576,6 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,clkbuf-sel = <0x7>;
bus-width = <4>;
ti,otap-del-sel-legacy = <0x0>;
@@ -601,7 +599,6 @@ sdhci2: mmc@fa20000 {
power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index eadbdd9ffe37..f69dbf9b8406 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -827,7 +827,6 @@ &sdhci0 {
bootph-all;
pinctrl-names = "default";
pinctrl-0 = <&emmc_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
status = "okay";
};
@@ -840,7 +839,6 @@ &sdhci1 {
vmmc-supply = <&vdd_3v3_sd>;
vqmmc-supply = <&vdd_sd_dv>;
- ti,driver-strength-ohm = <50>;
disable-wp;
cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
cd-debounce-delay-ms = <100>;
@@ -857,7 +855,6 @@ &sdhci2 {
ti,fails-without-test-cd;
cap-power-off-card;
keep-power-in-suspend;
- ti,driver-strength-ohm = <50>;
assigned-clocks = <&k3_clks 157 158>;
assigned-clock-parents = <&k3_clks 157 160>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 227e7fb3e5bb..db5a7746c82e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -561,7 +561,6 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 2497acc0dd60..74816e08a15e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -507,7 +507,6 @@ &sdhci1 {
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 10156a04a92c..9e37e54f141a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -426,7 +426,6 @@ &sdhci1 {
vqmmc-supply = <&vddshv_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 33768c02d8eb..6dd48c826f74 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -411,7 +411,6 @@ &sdhci0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -421,7 +420,6 @@ &sdhci1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index b355d0a715a9..1842f05ac351 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -646,7 +646,6 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 8c5651d2cf5d..0583ec3a9b52 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -508,7 +508,6 @@ &sdhci1 {
pinctrl-names = "default";
bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 1dddd6fc1a0d..c3a77f6282cb 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -471,7 +471,6 @@ &sdhci1 {
pinctrl-names = "default";
bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
--
2.34.1
next prev parent reply other threads:[~2024-01-31 0:37 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-31 0:37 [RFC PATCH 00/13] Add tuning algorithm for delay chain Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 01/13] drivers: mmc: host: sdhci_am654: " Judith Mendez
2024-01-31 11:04 ` Vignesh Raghavendra
2024-01-31 20:27 ` Judith Mendez
2024-02-02 10:00 ` Roger Quadros
2024-01-31 0:37 ` [RFC PATCH 02/13] drivers: mmc: host: sdhci_am654: Write ITAPDLY for DDR52 timing Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 03/13] drivers: mmc: host: sdhci_am654: Add missing OTAP/ITAP enable Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 04/13] drivers: mmc: host: sdhci_am654: Add ITAPDLYSEL in sdhci_j721e_4bit_set_clock Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 05/13] drivers: mmc: host: sdhci_am654: Fix ITAPDLY for HS400 timing Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 06/13] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez
2024-01-31 19:17 ` Nishanth Menon
2024-01-31 20:28 ` Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 07/13] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 08/13] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 09/13] arm64: dts: ti: k3-am64-main: Update ITAP/OTAP values for MMC Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 10/13] arm64: dts: ti: k3-am62-main: " Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 11/13] arm64: dts: ti: k3-am62p: Add missing properties " Judith Mendez
2024-02-02 9:50 ` Roger Quadros
2024-02-12 23:38 ` Judith Mendez
2024-01-31 0:37 ` Judith Mendez [this message]
2024-01-31 0:37 ` [RFC PATCH 13/13] arm64: dts: ti: k3-am6*: Reorganize MMC properties Judith Mendez
2024-02-02 9:54 ` Roger Quadros
2024-02-12 23:41 ` Judith Mendez
2024-01-31 13:35 ` [RFC PATCH 00/13] Add tuning algorithm for delay chain Raghavendra, Vignesh
2024-01-31 13:41 ` Krzysztof Kozlowski
2024-01-31 13:53 ` Raghavendra, Vignesh
2024-02-01 7:28 ` Krzysztof Kozlowski
2024-01-31 20:41 ` Judith Mendez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240131003714.2779593-13-jm@ti.com \
--to=jm@ti.com \
--cc=adrian.hunter@intel.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@kernel.org \
--cc=rs@ti.com \
--cc=u-kumar1@ti.com \
--cc=ulf.hansson@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox