From: Roger Quadros <rogerq@kernel.org>
To: Judith Mendez <jm@ti.com>, Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Andrew Davis <afd@ti.com>, Udit Kumar <u-kumar1@ti.com>,
devicetree@vger.kernel.org, Randolph Sapp <rs@ti.com>
Subject: Re: [RFC PATCH 13/13] arm64: dts: ti: k3-am6*: Reorganize MMC properties
Date: Fri, 2 Feb 2024 11:54:45 +0200 [thread overview]
Message-ID: <9c78f4b5-8580-4679-ae65-60878221e00b@kernel.org> (raw)
In-Reply-To: <20240131003714.2779593-14-jm@ti.com>
On 31/01/2024 02:37, Judith Mendez wrote:
> Reorganize various MMC properties for MMC nodes to be
> more uniform across devices.
>
> Add ti,clkbuf-sel to MMC nodes that are missing this property.
>
> Signed-off-by: Judith Mendez <jm@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 5 +++--
> arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 --
> arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 4 ++--
> arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 ++
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 7 +++++--
> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 3 +--
> arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 -
> 7 files changed, 13 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> index ca825088970f..32a8a68f1311 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> @@ -559,9 +559,9 @@ sdhci0: mmc@fa10000 {
> clock-names = "clk_ahb", "clk_xin";
> assigned-clocks = <&k3_clks 57 6>;
> assigned-clock-parents = <&k3_clks 57 8>;
> + bus-width = <8>;
Is bus-width fix for this instance? If not then we don't really know here what
bus-width is used by the board implementation. And it should come in the
board DTS file.
> mmc-ddr-1_8v;
> mmc-hs200-1_8v;
> - bus-width = <8>;
> ti,clkbuf-sel = <0x7>;
> ti,otap-del-sel-legacy = <0x0>;
> ti,otap-del-sel-mmc-hs = <0x0>;
> @@ -576,8 +576,8 @@ sdhci1: mmc@fa00000 {
> power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
> clock-names = "clk_ahb", "clk_xin";
> - ti,clkbuf-sel = <0x7>;
> bus-width = <4>;
> + ti,clkbuf-sel = <0x7>;
> ti,otap-del-sel-legacy = <0x0>;
> ti,otap-del-sel-sd-hs = <0x0>;
> ti,otap-del-sel-sdr12 = <0xf>;
> @@ -599,6 +599,7 @@ sdhci2: mmc@fa20000 {
> power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
> clock-names = "clk_ahb", "clk_xin";
> + bus-width = <4>;
> ti,clkbuf-sel = <0x7>;
> ti,otap-del-sel-legacy = <0x0>;
> ti,otap-del-sel-sd-hs = <0x0>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
> index f69dbf9b8406..0422615e4d98 100644
> --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
> @@ -836,7 +836,6 @@ &sdhci1 {
> bootph-all;
> pinctrl-names = "default";
> pinctrl-0 = <&sd_pins_default>;
> -
> vmmc-supply = <&vdd_3v3_sd>;
> vqmmc-supply = <&vdd_sd_dv>;
> disable-wp;
> @@ -850,7 +849,6 @@ &sdhci2 {
> vmmc-supply = <&wlan_en>;
> pinctrl-names = "default";
> pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
> - bus-width = <4>;
I wouldn't remove this from here if bus-width is variable for this
instance of MMC controller.
> non-removable;
> ti,fails-without-test-cd;
> cap-power-off-card;
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> index db5a7746c82e..88b112e657c8 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> @@ -561,6 +561,8 @@ sdhci1: mmc@fa00000 {
> power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
> clock-names = "clk_ahb", "clk_xin";
> + bus-width = <4>;
> + ti,clkbuf-sel = <0x7>;
> ti,otap-del-sel-legacy = <0x0>;
> ti,otap-del-sel-sd-hs = <0x0>;
> ti,otap-del-sel-sdr12 = <0xf>;
> @@ -572,8 +574,6 @@ sdhci1: mmc@fa00000 {
> ti,itap-del-sel-sd-hs = <0x0>;
> ti,itap-del-sel-sdr12 = <0x0>;
> ti,itap-del-sel-sdr25 = <0x0>;
> - ti,clkbuf-sel = <0x7>;
> - bus-width = <4>;
> no-1-8-v;
> status = "disabled";
> };
> diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
> index 6dd48c826f74..2b4c10b35db1 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
> @@ -407,10 +407,12 @@ &main_i2c2 {
> };
>
> &sdhci0 {
> + /* eMMC */
> bootph-all;
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&main_mmc0_pins_default>;
> + non-removable;
> disable-wp;
> };
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 1842f05ac351..34706ab9f5fb 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -626,9 +626,11 @@ sdhci0: mmc@fa10000 {
> power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 57 0>, <&k3_clks 57 1>;
> clock-names = "clk_ahb", "clk_xin";
> + bus-width = <8>;
> mmc-ddr-1_8v;
> mmc-hs200-1_8v;
> - ti,trm-icp = <0x2>;
> + ti,clkbuf-sel = <0x7>;
> + ti,trm-icp = <0x8>;
> ti,otap-del-sel-legacy = <0x0>;
> ti,otap-del-sel-mmc-hs = <0x0>;
> ti,otap-del-sel-ddr52 = <0x6>;
> @@ -646,6 +648,8 @@ sdhci1: mmc@fa00000 {
> power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
> clock-names = "clk_ahb", "clk_xin";
> + bus-width = <4>;
> + ti,clkbuf-sel = <0x7>;
> ti,otap-del-sel-legacy = <0x0>;
> ti,otap-del-sel-sd-hs = <0x0>;
> ti,otap-del-sel-sdr12 = <0xf>;
> @@ -653,7 +657,6 @@ sdhci1: mmc@fa00000 {
> ti,otap-del-sel-sdr50 = <0xc>;
> ti,otap-del-sel-sdr104 = <0x6>;
> ti,otap-del-sel-ddr50 = <0x9>;
> - ti,clkbuf-sel = <0x7>;
> ti,itap-del-sel-legacy = <0x0>;
> ti,itap-del-sel-sd-hs = <0x0>;
> ti,itap-del-sel-sdr12 = <0x0>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> index 0583ec3a9b52..572b98a217a6 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> @@ -493,8 +493,8 @@ eeprom@0 {
>
> /* eMMC */
> &sdhci0 {
> + bootph-all;
> status = "okay";
> - bus-width = <8>;
> non-removable;
> ti,driver-strength-ohm = <50>;
> disable-wp;
> @@ -506,7 +506,6 @@ &sdhci1 {
> status = "okay";
> vmmc-supply = <&vdd_mmc1>;
> pinctrl-names = "default";
> - bus-width = <4>;
> pinctrl-0 = <&main_mmc1_pins_default>;
> disable-wp;
> };
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> index c3a77f6282cb..600056105874 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> @@ -469,7 +469,6 @@ &sdhci1 {
> status = "okay";
> vmmc-supply = <&vdd_mmc1>;
> pinctrl-names = "default";
> - bus-width = <4>;
> pinctrl-0 = <&main_mmc1_pins_default>;
> disable-wp;
> };
--
cheers,
-roger
next prev parent reply other threads:[~2024-02-02 9:54 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-31 0:37 [RFC PATCH 00/13] Add tuning algorithm for delay chain Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 01/13] drivers: mmc: host: sdhci_am654: " Judith Mendez
2024-01-31 11:04 ` Vignesh Raghavendra
2024-01-31 20:27 ` Judith Mendez
2024-02-02 10:00 ` Roger Quadros
2024-01-31 0:37 ` [RFC PATCH 02/13] drivers: mmc: host: sdhci_am654: Write ITAPDLY for DDR52 timing Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 03/13] drivers: mmc: host: sdhci_am654: Add missing OTAP/ITAP enable Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 04/13] drivers: mmc: host: sdhci_am654: Add ITAPDLYSEL in sdhci_j721e_4bit_set_clock Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 05/13] drivers: mmc: host: sdhci_am654: Fix ITAPDLY for HS400 timing Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 06/13] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez
2024-01-31 19:17 ` Nishanth Menon
2024-01-31 20:28 ` Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 07/13] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 08/13] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 09/13] arm64: dts: ti: k3-am64-main: Update ITAP/OTAP values for MMC Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 10/13] arm64: dts: ti: k3-am62-main: " Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 11/13] arm64: dts: ti: k3-am62p: Add missing properties " Judith Mendez
2024-02-02 9:50 ` Roger Quadros
2024-02-12 23:38 ` Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 12/13] arm64: dts: ti: k3-am6*: Remove DLL properties for soft phys Judith Mendez
2024-01-31 0:37 ` [RFC PATCH 13/13] arm64: dts: ti: k3-am6*: Reorganize MMC properties Judith Mendez
2024-02-02 9:54 ` Roger Quadros [this message]
2024-02-12 23:41 ` Judith Mendez
2024-01-31 13:35 ` [RFC PATCH 00/13] Add tuning algorithm for delay chain Raghavendra, Vignesh
2024-01-31 13:41 ` Krzysztof Kozlowski
2024-01-31 13:53 ` Raghavendra, Vignesh
2024-02-01 7:28 ` Krzysztof Kozlowski
2024-01-31 20:41 ` Judith Mendez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9c78f4b5-8580-4679-ae65-60878221e00b@kernel.org \
--to=rogerq@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jm@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=rs@ti.com \
--cc=u-kumar1@ti.com \
--cc=ulf.hansson@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox