Linux MultiMedia Card development
 help / color / mirror / Atom feed
From: Judith Mendez <jm@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
	<linux-mmc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Randolph Sapp <rs@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH v1 2/5] mmc: sdhci_am654: Write ITAPDLY for DDR52 timing
Date: Wed, 31 Jan 2024 15:50:41 -0600	[thread overview]
Message-ID: <20240131215044.3163469-3-jm@ti.com> (raw)
In-Reply-To: <20240131215044.3163469-1-jm@ti.com>

For DDR52 timing, DLL is enabled but tuning is not carried
out, therefore the ITAPDLY value in PHY CTRL 4 register is
not correct. Fix this by writing ITAPDLY after enabling DLL.

Fixes: a161c45f2979 ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <jm@ti.com>
---
 drivers/mmc/host/sdhci_am654.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index a3798c9912f6..ff18a274b6f2 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -170,7 +170,19 @@ struct sdhci_am654_driver_data {
 #define DLL_CALIB	(1 << 4)
 };
 
-static void sdhci_am654_setup_dll(struct sdhci_host *host, unsigned int clock)
+static void sdhci_am654_write_itapdly(struct sdhci_am654_data *sdhci_am654,
+				      u32 itapdly)
+{
+	/* Set ITAPCHGWIN before writing to ITAPDLY */
+	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
+			   0x1 << ITAPCHGWIN_SHIFT);
+	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYSEL_MASK,
+			   itapdly << ITAPDLYSEL_SHIFT);
+	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
+}
+
+static void sdhci_am654_setup_dll(struct sdhci_host *host, unsigned int clock,
+				  unsigned char timing)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
@@ -236,17 +248,8 @@ static void sdhci_am654_setup_dll(struct sdhci_host *host, unsigned int clock)
 		dev_err(mmc_dev(host->mmc), "DLL failed to relock\n");
 		return;
 	}
-}
 
-static void sdhci_am654_write_itapdly(struct sdhci_am654_data *sdhci_am654,
-				      u32 itapdly)
-{
-	/* Set ITAPCHGWIN before writing to ITAPDLY */
-	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
-			   1 << ITAPCHGWIN_SHIFT);
-	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYSEL_MASK,
-			   itapdly << ITAPDLYSEL_SHIFT);
-	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
+	sdhci_am654_write_itapdly(sdhci_am654, sdhci_am654->itap_del_sel[timing]);
 }
 
 static void sdhci_am654_setup_delay_chain(struct sdhci_am654_data *sdhci_am654,
@@ -298,7 +301,7 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
 	regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
 
 	if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
-		sdhci_am654_setup_dll(host, clock);
+		sdhci_am654_setup_dll(host, clock, timing);
 		sdhci_am654->dll_enable = true;
 	} else {
 		sdhci_am654_setup_delay_chain(sdhci_am654, timing);
-- 
2.34.1


  parent reply	other threads:[~2024-01-31 21:50 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-31 21:50 [PATCH v1 0/5] Add tuning algorithm for delay chain Judith Mendez
2024-01-31 21:50 ` [PATCH v1 1/5] mmc: sdhci_am654: " Judith Mendez
2024-02-01 19:24   ` Andrew Davis
2024-01-31 21:50 ` Judith Mendez [this message]
2024-02-01 19:36   ` [PATCH v1 2/5] mmc: sdhci_am654: Write ITAPDLY for DDR52 timing Andrew Davis
2024-02-06 21:58     ` Judith Mendez
2024-02-06 22:10       ` Judith Mendez
2024-01-31 21:50 ` [PATCH v1 3/5] mmc: sdhci_am654: Add missing OTAP/ITAP enable Judith Mendez
2024-02-01 19:46   ` Andrew Davis
2024-02-06 22:00     ` Judith Mendez
2024-02-06 22:16       ` Andrew Davis
2024-01-31 21:50 ` [PATCH v1 4/5] mmc: sdhci_am654: Add ITAPDLYSEL in sdhci_j721e_4bit_set_clock Judith Mendez
2024-02-01 19:57   ` Andrew Davis
2024-02-01 21:52     ` Judith Mendez
2024-02-02  4:42     ` Vignesh Raghavendra
2024-01-31 21:50 ` [PATCH v1 5/5] mmc: sdhci_am654: Fix ITAPDLY for HS400 timing Judith Mendez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240131215044.3163469-3-jm@ti.com \
    --to=jm@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=rs@ti.com \
    --cc=ulf.hansson@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox