Linux MultiMedia Card development
 help / color / mirror / Atom feed
From: Judith Mendez <jm@ti.com>
To: Andrew Davis <afd@ti.com>, Ulf Hansson <ulf.hansson@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>,
	<linux-mmc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Randolph Sapp <rs@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>
Subject: Re: [PATCH v1 4/5] mmc: sdhci_am654: Add ITAPDLYSEL in sdhci_j721e_4bit_set_clock
Date: Thu, 1 Feb 2024 15:52:27 -0600	[thread overview]
Message-ID: <866dc9ae-89be-4a6e-974b-d878af5e71d0@ti.com> (raw)
In-Reply-To: <7c40a415-f2d5-4a39-8c7e-7e7a05e0bdb3@ti.com>

Hi Andrew,

On 2/1/24 1:57 PM, Andrew Davis wrote:
> On 1/31/24 3:50 PM, Judith Mendez wrote:
>> Add ITAPDLYSEL to sdhci_j721e_4bit_set_clock function.
>> This allows to set the correct ITAPDLY for timings that
>> do not carry out tuning.
>>
>> Fixes: 1accbced1c32 ("mmc: sdhci_am654: Add Support for 4 bit IP on 
>> J721E")
> 
> You are adding this as a new feature, and not having a feature doesn't mean
> the initial patch was broken. If this patch was backported to kernels only
> containing the above patch it would cause more issues, so no need for the
> fixes tags on this nor the last patch.
> 

Sure, will fix, thanks.

>> Signed-off-by: Judith Mendez <jm@ti.com>
>> ---
>>   drivers/mmc/host/sdhci_am654.c | 10 ++++++++--
>>   1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci_am654.c 
>> b/drivers/mmc/host/sdhci_am654.c
>> index 5ac82bc70706..f5dc981c470d 100644
>> --- a/drivers/mmc/host/sdhci_am654.c
>> +++ b/drivers/mmc/host/sdhci_am654.c
>> @@ -321,6 +321,7 @@ static void sdhci_j721e_4bit_set_clock(struct 
>> sdhci_host *host,
>>       unsigned char timing = host->mmc->ios.timing;
>>       u32 otap_del_sel;
>>       u32 itap_del_ena;
>> +    u32 itap_del_sel;
>>       u32 mask, val;
>>       /* Setup Output TAP delay */
>> @@ -329,12 +330,17 @@ static void sdhci_j721e_4bit_set_clock(struct 
>> sdhci_host *host,
>>       mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
>>       val = (0x1 << OTAPDLYENA_SHIFT) | (otap_del_sel << 
>> OTAPDLYSEL_SHIFT);
>> +    /* Setup Input TAP delay */
>>       itap_del_ena = sdhci_am654->itap_del_ena[timing];
>> +    itap_del_sel = sdhci_am654->itap_del_sel[timing];
>> -    mask |= ITAPDLYENA_MASK;
>> -    val |= (itap_del_ena << ITAPDLYENA_SHIFT);
>> +    mask |= ITAPDLYENA_MASK | ITAPDLYSEL_MASK;
>> +    val |= (itap_del_ena << ITAPDLYENA_SHIFT) | (itap_del_sel << 
>> ITAPDLYSEL_SHIFT);
>> +    regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
>> +               1 << ITAPCHGWIN_SHIFT);
>>       regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
>> +    regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 
>> 0);
>>       regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
>>                  sdhci_am654->clkbuf_sel);

~ Judith

  reply	other threads:[~2024-02-01 21:52 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-31 21:50 [PATCH v1 0/5] Add tuning algorithm for delay chain Judith Mendez
2024-01-31 21:50 ` [PATCH v1 1/5] mmc: sdhci_am654: " Judith Mendez
2024-02-01 19:24   ` Andrew Davis
2024-01-31 21:50 ` [PATCH v1 2/5] mmc: sdhci_am654: Write ITAPDLY for DDR52 timing Judith Mendez
2024-02-01 19:36   ` Andrew Davis
2024-02-06 21:58     ` Judith Mendez
2024-02-06 22:10       ` Judith Mendez
2024-01-31 21:50 ` [PATCH v1 3/5] mmc: sdhci_am654: Add missing OTAP/ITAP enable Judith Mendez
2024-02-01 19:46   ` Andrew Davis
2024-02-06 22:00     ` Judith Mendez
2024-02-06 22:16       ` Andrew Davis
2024-01-31 21:50 ` [PATCH v1 4/5] mmc: sdhci_am654: Add ITAPDLYSEL in sdhci_j721e_4bit_set_clock Judith Mendez
2024-02-01 19:57   ` Andrew Davis
2024-02-01 21:52     ` Judith Mendez [this message]
2024-02-02  4:42     ` Vignesh Raghavendra
2024-01-31 21:50 ` [PATCH v1 5/5] mmc: sdhci_am654: Fix ITAPDLY for HS400 timing Judith Mendez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=866dc9ae-89be-4a6e-974b-d878af5e71d0@ti.com \
    --to=jm@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=afd@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=rs@ti.com \
    --cc=ulf.hansson@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox