Linux MultiMedia Card development
 help / color / mirror / Atom feed
* [PATCH] mmc: moxart: use platform helpers for resource and IRQ
@ 2026-07-22 20:46 Rosen Penev
  0 siblings, 0 replies; only message in thread
From: Rosen Penev @ 2026-07-22 20:46 UTC (permalink / raw)
  To: linux-mmc
  Cc: Ulf Hansson, Nathan Chancellor, Nick Desaulniers, Bill Wendling,
	Justin Stitt, open list,
	open list:CLANG/LLVM BUILD SUPPORT:Keyword:b(?i:clang|llvm)b

Replace of_address_to_resource() and the following devm_ioremap_resource()
with a single devm_platform_get_and_ioremap_resource() call in
moxart_probe(). This requests the register region and maps it once, which
is equivalent to the previous devm_ioremap_resource() behavior, and drops
the now-redundant separate resource lookup.

Similarly replace irq_of_parse_and_map() with platform_get_irq(), which
returns a negative errno on failure (including -EPROBE_DEFER) instead of
0, and tighten the error check to irq < 0.

Both substitutions are equivalent for a DT-backed platform device. The
remaining OF usage (mmc_of_parse() and the of_device_id table) is covered
by already-included headers, so linux/of_address.h and linux/of_irq.h
are dropped.

No functional change; the MMC register window is requested and mapped
exactly once, so there is no overlapping region claim.

Built for ARM (allmodconfig + CONFIG_MMC_MOXART) with LLVM=1;
drivers/mmc/host/moxart-mmc.o compiles cleanly.

Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/mmc/host/moxart-mmc.c | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
index 4a4d8b19b18c..28aed13549a6 100644
--- a/drivers/mmc/host/moxart-mmc.c
+++ b/drivers/mmc/host/moxart-mmc.c
@@ -26,8 +26,6 @@
 #include <linux/mmc/sd.h>
 #include <linux/sched.h>
 #include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/clk.h>
 #include <linux/bitops.h>
 #include <linux/of_dma.h>
@@ -555,8 +553,7 @@ static const struct mmc_host_ops moxart_ops = {
 static int moxart_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node;
-	struct resource res_mmc;
+	struct resource *res_mmc;
 	struct mmc_host *mmc;
 	struct moxart_host *host = NULL;
 	struct dma_slave_config cfg;
@@ -565,30 +562,24 @@ static int moxart_probe(struct platform_device *pdev)
 	int irq, ret;
 	u32 i;
 
+	reg_mmc = devm_platform_get_and_ioremap_resource(pdev, 0, &res_mmc);
+	if (IS_ERR(reg_mmc))
+		return PTR_ERR(reg_mmc);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
 	mmc = devm_mmc_alloc_host(dev, sizeof(*host));
 	if (!mmc) {
 		dev_err(dev, "devm_mmc_alloc_host failed\n");
 		return -ENOMEM;
 	}
 
-	ret = of_address_to_resource(node, 0, &res_mmc);
-	if (ret)
-		return dev_err_probe(dev, ret,
-				     "of_address_to_resource failed\n");
-
-	irq = irq_of_parse_and_map(node, 0);
-	if (irq <= 0)
-		return dev_err_probe(dev, -EINVAL,
-				     "irq_of_parse_and_map failed\n");
-
 	clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	reg_mmc = devm_ioremap_resource(dev, &res_mmc);
-	if (IS_ERR(reg_mmc))
-		return PTR_ERR(reg_mmc);
-
 	ret = mmc_of_parse(mmc);
 	if (ret)
 		return ret;
@@ -596,7 +587,7 @@ static int moxart_probe(struct platform_device *pdev)
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
 	host->base = reg_mmc;
-	host->reg_phys = res_mmc.start;
+	host->reg_phys = res_mmc->start;
 	host->timeout = msecs_to_jiffies(1000);
 	host->sysclk = clk_get_rate(clk);
 	host->fifo_width = readl(host->base + REG_FEATURE) << 2;
-- 
2.55.0


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2026-07-22 20:46 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-22 20:46 [PATCH] mmc: moxart: use platform helpers for resource and IRQ Rosen Penev

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox