Re: [“PATCH” 1/2] mmc: sdhci-of-arasan: Use clock-frequency property to update clk_xin

[Michal Simek <michal.simek@xilinx.com>]

On 6/3/21 8:22 PM, rashmi.a@intel.com wrote:
> From: Rashmi A <rashmi.a@intel.com>
> 
> If clock-frequency property is set and it is not the same as the current
> clock rate of clk_xin(base clock frequency), set clk_xin to use the
> provided clock rate.
> 
> Signed-off-by: Rashmi A <rashmi.a@intel.com>
> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
> ---
>  drivers/mmc/host/sdhci-of-arasan.c | 14 ++++++++++++--
>  1 file changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 839965f7c717..0e7c07ed9690 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -1542,6 +1542,8 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	sdhci_get_of_property(pdev);
> +
>  	sdhci_arasan->clk_ahb = devm_clk_get(dev, "clk_ahb");
>  	if (IS_ERR(sdhci_arasan->clk_ahb)) {
>  		ret = dev_err_probe(dev, PTR_ERR(sdhci_arasan->clk_ahb),
> @@ -1561,14 +1563,22 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
>  		goto err_pltfm_free;
>  	}
>  
> +	/* If clock-frequency property is set, use the provided value */
> +	if (pltfm_host->clock &&
> +	    pltfm_host->clock != clk_get_rate(clk_xin)) {
> +		ret = clk_set_rate(clk_xin, pltfm_host->clock);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to set SD clock rate\n");
> +			goto clk_dis_ahb;
> +		}
> +	}
> +
>  	ret = clk_prepare_enable(clk_xin);
>  	if (ret) {
>  		dev_err(dev, "Unable to enable SD clock.\n");
>  		goto clk_dis_ahb;
>  	}
>  
> -	sdhci_get_of_property(pdev);
> -
>  	if (of_property_read_bool(np, "xlnx,fails-without-test-cd"))
>  		sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_FORCE_CDTEST;
>  
> 

Manish/Sai: Please retest this on Xilinx SOC.

Thanks,
Michal