Re: [PATCH V16 08/23] mmc: core: Support UHS-II Auto Command Error Recovery

[Adrian Hunter <adrian.hunter@intel.com>]

On 22/05/24 14:08, Victor Shih wrote:
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
> 
> Add UHS-II Auto Command Error Recovery functionality
> into the MMC request processing flow.

Not sure what "auto" means here, but the commit message
should outline what the spec. requires for error recovery.

> 
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> ---
> 
> Updates in V16:
>  - Separate the Error Recovery mechanism from patch#7 to patch#8.
> 
> ---
> 
>  drivers/mmc/core/core.c    |  4 ++
>  drivers/mmc/core/core.h    |  1 +
>  drivers/mmc/core/sd_uhs2.c | 80 ++++++++++++++++++++++++++++++++++++++
>  include/linux/mmc/host.h   |  6 +++
>  4 files changed, 91 insertions(+)
> 
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 68496c51a521..18642afc405f 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -403,6 +403,10 @@ void mmc_wait_for_req_done(struct mmc_host *host, struct mmc_request *mrq)
>  	while (1) {
>  		wait_for_completion(&mrq->completion);
>  
> +		if (host->ops->get_cd(host))
> +			if (mrq->cmd->error || (mrq->data && mrq->data->error))
> +				mmc_sd_uhs2_error_recovery(host, mrq);

There are several issues with this:

1. It is not OK to start a request from within the request path
because it is recursive:

   mmc_wait_for_req_done()			<--
      mmc_sd_uhs2_error_recovery()
         sd_uhs2_abort_trans()
            mmc_wait_for_cmd()
               mmc_wait_for_req()
                  mmc_wait_for_req_done()	<--

2. The mmc block driver does not use this path

3. No need to always call ->get_cd() if there is no error

It is worth considering whether the host controller could
send the abort command as part of the original request, as
is done with the stop command.

> +
>  		cmd = mrq->cmd;
>  
>  		if (!cmd->error || !cmd->retries ||
> diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
> index 920323faa834..259d47c8bb19 100644
> --- a/drivers/mmc/core/core.h
> +++ b/drivers/mmc/core/core.h
> @@ -82,6 +82,7 @@ int mmc_attach_mmc(struct mmc_host *host);
>  int mmc_attach_sd(struct mmc_host *host);
>  int mmc_attach_sdio(struct mmc_host *host);
>  int mmc_attach_sd_uhs2(struct mmc_host *host);
> +void mmc_sd_uhs2_error_recovery(struct mmc_host *mmc, struct mmc_request *mrq);
>  
>  /* Module parameters */
>  extern bool use_spi_crc;
> diff --git a/drivers/mmc/core/sd_uhs2.c b/drivers/mmc/core/sd_uhs2.c
> index 85939a2582dc..d5acb4e6ccac 100644
> --- a/drivers/mmc/core/sd_uhs2.c
> +++ b/drivers/mmc/core/sd_uhs2.c
> @@ -1324,3 +1324,83 @@ int mmc_attach_sd_uhs2(struct mmc_host *host)
>  
>  	return err;
>  }
> +
> +static void sd_uhs2_abort_trans(struct mmc_host *mmc)
> +{
> +	struct mmc_request mrq = {};
> +	struct mmc_command cmd = {0};
> +	struct uhs2_command uhs2_cmd = {};
> +	int err;
> +
> +	mrq.cmd = &cmd;
> +	mmc->ongoing_mrq = &mrq;
> +
> +	uhs2_cmd.header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD |
> +			  mmc->card->uhs2_config.node_id;
> +	uhs2_cmd.arg = ((UHS2_DEV_CMD_TRANS_ABORT & 0xFF) << 8) |
> +			UHS2_NATIVE_CMD_WRITE |
> +			(UHS2_DEV_CMD_TRANS_ABORT >> 8);
> +
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, 0, 0);
> +	err = mmc_wait_for_cmd(mmc, &cmd, 0);
> +
> +	if (err)
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(mmc), __func__, err);
> +}
> +
> +static void sd_uhs2_abort_status_read(struct mmc_host *mmc)
> +{
> +	struct mmc_request mrq = {};
> +	struct mmc_command cmd = {0};
> +	struct uhs2_command uhs2_cmd = {};
> +	int err;
> +
> +	mrq.cmd = &cmd;
> +	mmc->ongoing_mrq = &mrq;
> +
> +	uhs2_cmd.header = UHS2_NATIVE_PACKET |
> +			  UHS2_PACKET_TYPE_CCMD |
> +			  mmc->card->uhs2_config.node_id;
> +	uhs2_cmd.arg = ((UHS2_DEV_STATUS_REG & 0xFF) << 8) |
> +			UHS2_NATIVE_CMD_READ |
> +			UHS2_NATIVE_CMD_PLEN_4B |
> +			(UHS2_DEV_STATUS_REG >> 8);
> +
> +	sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, 0, 0);
> +	err = mmc_wait_for_cmd(mmc, &cmd, 0);
> +
> +	if (err)
> +		pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",
> +		       mmc_hostname(mmc), __func__, err);
> +}
> +
> +void mmc_sd_uhs2_error_recovery(struct mmc_host *mmc, struct mmc_request *mrq)
> +{
> +	mmc->ops->uhs2_reset_cmd_data(mmc);

The host controller should already have done any resets needed.
sdhci already has support for doing that - see host->pending_reset

> +
> +	if (mrq->data) {
> +		if (mrq->data->error && mmc_card_uhs2(mmc)) {
> +			if (mrq->cmd) {
> +				switch (mrq->cmd->error) {
> +				case ETIMEDOUT:
> +				case EILSEQ:
> +				case EIO:
> +					sd_uhs2_abort_trans(mmc);
> +					sd_uhs2_abort_status_read(mmc);

What is the purpose of sd_uhs2_abort_status_read() here?
It is not obvious it does anything.

> +					break;
> +				default:
> +					break;
> +				}
> +			}
> +		}
> +	} else {
> +		if (mrq->cmd) {
> +			switch (mrq->cmd->error) {
> +			case ETIMEDOUT:
> +				sd_uhs2_abort_trans(mmc);
> +				break;
> +			}
> +		}
> +	}
> +}
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index fc9520b3bfa4..c914a58f7e1e 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -271,6 +271,12 @@ struct mmc_host_ops {
>  	 * negative errno in case of a failure or zero for success.
>  	 */
>  	int	(*uhs2_control)(struct mmc_host *host, enum sd_uhs2_operation op);
> +
> +	/*
> +	 * The uhs2_reset_cmd_data callback is used to excute reset
> +	 * when a auto command error occurs.
> +	 */
> +	void 	(*uhs2_reset_cmd_data)(struct mmc_host *host);
>  };
>  
>  struct mmc_cqe_ops {