From: Jaehoon Chung <jh80.chung@samsung.com>
To: Girish K S <girish.shivananjappa@linaro.org>
Cc: linux-mmc@vger.kernel.org, cjb@laptop.org, kgene.kim@samsung.com,
patches@linaro.org, linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH V7] mmc: core: Add Power Off Notify Feature eMMC 4.5
Date: Tue, 04 Oct 2011 19:52:10 +0900 [thread overview]
Message-ID: <4E8AE55A.2030808@samsung.com> (raw)
In-Reply-To: <1317293169-16677-2-git-send-email-girish.shivananjappa@linaro.org>
Hi Girish..
i think this patch didn't base on latest for mmc-next..
i commented the below.
Regards,
Jaehoon Chung
On 09/29/2011 07:46 PM, Girish K S wrote:
> This patch adds the support for power off notify feature
> available in eMMC 4.5 devices.
> If the the host has support for this feature, then the
> mmc core will notify it to the device by setting the
> POWER_OFF_NOTIFICATION byte in the extended csd register
> with a value 1(POWER_ON).
> For suspend mode short timeout is used, whereas for the
> normal poweroff long timeout is used.
> This patch is dependent on Seungwon Jeon's patch for
> CMD6 timeout.
>
> Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
> ---
> Changes in V2:
> Adds poweroff notification handling in suspend/normal
> Changes in V4:
> Updated with review comments of Jeon
> Changes in V5:
> This patch version fixes the problem with power off
> notify function, when called for the first time and
> card is not yet initialised.
> Changes in V6:
> Fixes checkpatch errors. The patches are generated after
> rebasing to chris's mmc-next branch.
> Changes in V7:
> Rebased to chris-mmc/mmc-next branch. merged to patches
> to single patch.
> drivers/mmc/core/core.c | 37 +++++++++++++++++++++++++++++++++++++
> drivers/mmc/core/mmc.c | 22 ++++++++++++++++++++++
> drivers/mmc/host/sdhci.c | 10 ++++++++++
> include/linux/mmc/card.h | 21 +++++++++++++++++++++
> include/linux/mmc/host.h | 5 +++++
> include/linux/mmc/mmc.h | 6 ++++++
> 6 files changed, 101 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 9698d8a..5fb2120 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -1198,11 +1198,46 @@ static void mmc_power_up(struct mmc_host *host)
>
> void mmc_power_off(struct mmc_host *host)
> {
> + struct mmc_card *card;
> + unsigned int notify_type;
> + unsigned int timeout;
> + int err;
> +
> + BUG_ON(!host);
> +
> mmc_host_clk_hold(host);
>
> + card = host->card;
> host->ios.clock = 0;
> host->ios.vdd = 0;
>
> + if (card != NULL && mmc_card_mmc(card) &&
> + (mmc_card_powernotify_on(card))) {
> +
> + if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
> + notify_type = EXT_CSD_POWER_OFF_SHORT;
> + timeout = card->ext_csd.generic_cmd6_time;
> + mmc_card_set_powernotify_short(card);
> + } else {
> + notify_type = EXT_CSD_POWER_OFF_LONG;
> + timeout = card->ext_csd.power_off_longtime;
> + mmc_card_set_powernotify_long(card);
> + }
> +
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_POWER_OFF_NOTIFICATION,
> + notify_type, timeout);
> +
> + if (err && err != -EBADMSG)
> + pr_err("Device failed to respond "
> + "within %d poweroff time."
> + "forcefully powering down"
> + "the device\n", timeout);
> +
> + /* Set the card state to no notification after the poweroff */
> + mmc_card_set_powernotify_off(card);
> + }
> +
> /*
> * Reset ocr mask to be the highest possible voltage supported for
> * this mmc host. This value will be used at next power up.
> @@ -2194,6 +2230,7 @@ int mmc_pm_notify(struct notifier_block *notify_block,
>
> spin_lock_irqsave(&host->lock, flags);
> host->rescan_disable = 1;
> + host->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
> spin_unlock_irqrestore(&host->lock, flags);
> cancel_delayed_work_sync(&host->detect);
>
> @@ -2217,6 +2254,7 @@ int mmc_pm_notify(struct notifier_block *notify_block,
>
> spin_lock_irqsave(&host->lock, flags);
> host->rescan_disable = 0;
> + host->power_notify_type = MMC_HOST_PW_NOTIFY_LONG;
> spin_unlock_irqrestore(&host->lock, flags);
> mmc_detect_change(host, 0);
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index f28aa4f..25ba7f5 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -447,6 +447,11 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
> else
> card->erased_byte = 0x0;
>
> + if (card->ext_csd.rev >= 6) {
> + card->ext_csd.power_off_longtime = 10 *
> + ext_csd[EXT_CSD_POWER_OFF_LONG_TIME];
> + }
> +
> out:
> return err;
> }
> @@ -829,6 +834,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> }
>
> /*
> + * If the host supports the power_off_notify capability then
> + * set the notification byte in the ext_csd register of device
> + */
> + if (host->caps2 & MMC_CAP_POWEROFF_NOTIFY &&
> + (mmc_card_powernotify_off(card))) {
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_POWER_OFF_NOTIFICATION,
> + EXT_CSD_POWER_ON,
> + card->ext_csd.generic_cmd6_time);
> + if (err && err != -EBADMSG)
> + goto free_card;
> + }
> +
you used host->caps2, i think right that should be use
MMC_CAP2_POWEROFF_NOTIFY.
> + if (!err)
> + mmc_card_set_powernotify_on(card);
> +
> + /*
> * Activate high speed (if supported)
> */
> if (card->ext_csd.hs_max_dtr != 0) {
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 4220133..2818238 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -2599,6 +2599,16 @@ int sdhci_add_host(struct sdhci_host *host)
> if (caps[1] & SDHCI_DRIVER_TYPE_D)
> mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
>
> + /*
> + * If Notify capability is enabled and
> + * notify type is not initialised by host, set default to
> + * long power off notify timeout value
> + */
> + if (mmc->caps2 & MMC_CAP_POWEROFF_NOTIFY)
> + mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
> + else
> + mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE;
> +
also here...
> /* Initial value for re-tuning timer count */
> host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
> SDHCI_RETUNING_TIMER_COUNT_SHIFT;
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 15e5ce2..d6f8c85 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -53,6 +53,8 @@ struct mmc_ext_csd {
> u8 rst_n_function;
> unsigned int part_time; /* Units: ms */
> unsigned int sa_timeout; /* Units: 100ns */
> + unsigned int generic_cmd6_time; /* Units: ms */
> + unsigned int power_off_longtime; /* Units: ms */
> unsigned int hs_max_dtr;
> unsigned int sectors;
> unsigned int card_type;
> @@ -192,6 +194,11 @@ struct mmc_card {
> #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */
> #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */
> /* byte mode */
> + unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */
> +#define MMC_NO_POWER_NOTIFICATION 0
> +#define MMC_POWERED_ON 1
> +#define MMC_POWEROFF_SHORT 2
> +#define MMC_POWEROFF_LONG 3
>
> unsigned int erase_size; /* erase size in sectors */
> unsigned int erase_shift; /* if erase unit is power 2 */
> @@ -329,6 +336,20 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
> #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
> #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
>
> +#define mmc_card_powernotify_on(c) \
> + ((c)->poweroff_notify_state == MMC_POWERED_ON)
> +#define mmc_card_powernotify_off(c) \
> + ((c)->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)
> +
> +#define mmc_card_set_powernotify_off(c) \
> + ((c)->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION)
> +#define mmc_card_set_powernotify_on(c) \
> + ((c)->poweroff_notify_state = MMC_POWERED_ON)
> +#define mmc_card_set_powernotify_short(c) \
> + ((c)->poweroff_notify_state = MMC_POWEROFF_SHORT)
> +#define mmc_card_set_powernotify_long(c) \
> + ((c)->poweroff_notify_state = MMC_POWEROFF_LONG)
> +
> /*
> * Quirk add/remove for MMC products.
> */
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index f62ffa2..b711a00 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -245,8 +245,13 @@ struct mmc_host {
> #define MMC_CAP_HS200_1_8V_SDR (1 << 2) /* can support */
> #define MMC_CAP_HS200_1_2V_SDR (1 << 3) /* can support */
> #define MMC_CAP_HIGHSPEED_200 (1 << 4) /* Can do MMC HS200 timing */
> +#define MMC_CAP_POWEROFF_NOTIFY (1 << 31) /* Notify poweroff supported */
>
> mmc_pm_flag_t pm_caps; /* supported pm features */
> + unsigned int power_notify_type;
> +#define MMC_HOST_PW_NOTIFY_NONE 0
> +#define MMC_HOST_PW_NOTIFY_SHORT 1
> +#define MMC_HOST_PW_NOTIFY_LONG 2
>
> #ifdef CONFIG_MMC_CLKGATE
> int clk_requests; /* internal reference counter */
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 3f2e210..944c99b 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -271,6 +271,7 @@ struct _mmc_csd {
> * EXT_CSD fields
> */
>
> +#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
> #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
> #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
> #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
> @@ -348,6 +349,11 @@ struct _mmc_csd {
> #define EXT_CSD_RST_N_EN_MASK 0x3
> #define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */
>
> +#define EXT_CSD_NO_POWER_NOTIFICATION 0
> +#define EXT_CSD_POWER_ON 1
> +#define EXT_CSD_POWER_OFF_SHORT 2
> +#define EXT_CSD_POWER_OFF_LONG 3
> +
> #define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */
> #define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */
> #define EXT_CSD_PWR_CL_8BIT_SHIFT 4
next prev parent reply other threads:[~2011-10-04 10:52 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-29 10:46 [PATCH V3] mmc: core: HS200 mode support for eMMC 4.5 Girish K S
2011-09-29 10:46 ` [PATCH V7] mmc: core: Add Power Off Notify Feature " Girish K S
2011-10-04 10:52 ` Jaehoon Chung [this message]
2011-10-04 11:03 ` Girish K S
2011-10-04 11:16 ` Jaehoon Chung
2011-10-04 11:20 ` Girish K S
2011-10-04 11:41 ` Girish K S
2011-10-04 12:12 ` Girish K S
2011-10-04 12:19 ` Jaehoon Chung
2011-10-04 12:43 ` Girish K S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E8AE55A.2030808@samsung.com \
--to=jh80.chung@samsung.com \
--cc=cjb@laptop.org \
--cc=girish.shivananjappa@linaro.org \
--cc=kgene.kim@samsung.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox