From: Jaehoon Chung <jh80.chung@samsung.com>
To: Beomho Seo <beomho.seo@samsung.com>, Chris Ball <cjb@laptop.org>
Cc: "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
"Jaehoon Chung" <jh80.chung@samsung.com>,
myungjoo.ham@samsung.com, "Heiko Stübner" <heiko@sntech.de>
Subject: Re: [PATCH v2] mmc: sdhci-s3c: Use mmc_gpio_request_cd fuction
Date: Mon, 18 Nov 2013 14:15:03 +0900 [thread overview]
Message-ID: <5289A257.7090506@samsung.com> (raw)
In-Reply-To: <5278DB0C.8060702@samsung.com>
Hi all,
Didn't have Any other comment for this patch?
If don't have any other comment, i want this patch is submitted at mmc-next.
We had tested this patch with exynos4 series.
CC'd Heiko.
Best Regards,
Jaehoon Chung
On 11/05/2013 08:48 PM, Beomho Seo wrote:
> Hello all,
>
> I have revised some issues of v1 revision.
> This patch used mmc_gpio_request_cd function for detect card from cd-gpio pin.
> Please give your feedback at that time.
>
> Change from v2 to v1
> - Remove "return ret;" from "err_req_cd:".
> - Revised sdhci_s3c_remove function.
>
> Subject: [PATCH] mmc: sdhci-s3c: Use mmc_gpio_request_cd function
>
> Include slot-gpio header file.
> Use mmc_gpio_request_cd function.
> Remove sehci_s3c_setup_card_detect_gpio/card_detect_thread functions.
>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> ---
> drivers/mmc/host/sdhci-s3c.c | 56 +++++++++++-------------------------------
> 1 file changed, 14 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 6debda9..d8696d2 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -27,6 +27,7 @@
> #include <linux/pm_runtime.h>
>
> #include <linux/mmc/host.h>
> +#include <linux/mmc/slot-gpio.h>
>
> #include "sdhci-s3c-regs.h"
> #include "sdhci.h"
> @@ -400,44 +401,6 @@ static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
> }
> }
>
> -static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void *dev_id)
> -{
> - struct sdhci_s3c *sc = dev_id;
> - int status = gpio_get_value(sc->ext_cd_gpio);
> - if (sc->pdata->ext_cd_gpio_invert)
> - status = !status;
> - sdhci_s3c_notify_change(sc->pdev, status);
> - return IRQ_HANDLED;
> -}
> -
> -static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
> -{
> - struct s3c_sdhci_platdata *pdata = sc->pdata;
> - struct device *dev = &sc->pdev->dev;
> -
> - if (devm_gpio_request(dev, pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
> - sc->ext_cd_gpio = pdata->ext_cd_gpio;
> - sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
> - if (sc->ext_cd_irq &&
> - request_threaded_irq(sc->ext_cd_irq, NULL,
> - sdhci_s3c_gpio_card_detect_thread,
> - IRQF_TRIGGER_RISING |
> - IRQF_TRIGGER_FALLING |
> - IRQF_ONESHOT,
> - dev_name(dev), sc) == 0) {
> - int status = gpio_get_value(sc->ext_cd_gpio);
> - if (pdata->ext_cd_gpio_invert)
> - status = !status;
> - sdhci_s3c_notify_change(sc->pdev, status);
> - } else {
> - dev_warn(dev, "cannot request irq for card detect\n");
> - sc->ext_cd_irq = 0;
> - }
> - } else {
> - dev_err(dev, "cannot request gpio for card detect\n");
> - }
> -}
> -
> #ifdef CONFIG_OF
> static int sdhci_s3c_parse_dt(struct device *dev,
> struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
> @@ -699,8 +662,14 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
> if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
> pdata->ext_cd_init(&sdhci_s3c_notify_change);
> if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
> - gpio_is_valid(pdata->ext_cd_gpio))
> - sdhci_s3c_setup_card_detect_gpio(sc);
> + gpio_is_valid(pdata->ext_cd_gpio)) {
> + ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio, 0);
> + if (ret) {
> + dev_err(dev,
> + "failed to request card detect gpio\n");
> + goto err_req_cd;
> + }
> + }
>
> #ifdef CONFIG_PM_RUNTIME
> if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
> @@ -708,6 +677,9 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
> #endif
> return 0;
>
> + err_req_cd:
> + mmc_gpio_free_cd(host->mmc);
> +
> err_req_regs:
> #ifndef CONFIG_PM_RUNTIME
> clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
> @@ -731,8 +703,8 @@ static int sdhci_s3c_remove(struct platform_device *pdev)
> if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
> pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
>
> - if (sc->ext_cd_irq)
> - free_irq(sc->ext_cd_irq, sc);
> + if (pdata->ext_cd_gpio)
> + mmc_gpio_free_cd(host->mmc);
>
> #ifdef CONFIG_PM_RUNTIME
> if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
>
next prev parent reply other threads:[~2013-11-18 5:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-05 11:48 [PATCH v2] mmc: sdhci-s3c: Use mmc_gpio_request_cd fuction Beomho Seo
2013-11-18 5:15 ` Jaehoon Chung [this message]
2013-11-18 20:03 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5289A257.7090506@samsung.com \
--to=jh80.chung@samsung.com \
--cc=beomho.seo@samsung.com \
--cc=cjb@laptop.org \
--cc=heiko@sntech.de \
--cc=linux-mmc@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox