From: Ping-Ke Shih <pkshih@realtek.com>
To: Fiona Klute <fiona.klute@gmx.de>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: "Kalle Valo" <kvalo@kernel.org>,
"Ulf Hansson" <ulf.hansson@linaro.org>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
"Pavel Machek" <pavel@ucw.cz>, "Ondřej Jirman" <megi@xff.cz>
Subject: RE: [PATCH 4/9] wifi: rtw88: Add rtw8703b.h
Date: Mon, 5 Feb 2024 02:24:43 +0000 [thread overview]
Message-ID: <64e338d9e0dd43e69fa2e6e1dd3ecb2c@realtek.com> (raw)
In-Reply-To: <20240202121050.977223-5-fiona.klute@gmx.de>
> -----Original Message-----
> From: Fiona Klute <fiona.klute@gmx.de>
> Sent: Friday, February 2, 2024 8:11 PM
> To: linux-wireless@vger.kernel.org; Ping-Ke Shih <pkshih@realtek.com>
> Cc: Kalle Valo <kvalo@kernel.org>; Ulf Hansson <ulf.hansson@linaro.org>; linux-mmc@vger.kernel.org; Pavel
> Machek <pavel@ucw.cz>; Ondřej Jirman <megi@xff.cz>; Fiona Klute <fiona.klute@gmx.de>
> Subject: [PATCH 4/9] wifi: rtw88: Add rtw8703b.h
>
> This is the main header for the new rtw88_8703b chip driver.
>
> Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
> ---
> drivers/net/wireless/realtek/rtw88/rtw8703b.h | 62 +++++++++++++++++++
> 1 file changed, 62 insertions(+)
> create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8703b.h
>
> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8703b.h
> b/drivers/net/wireless/realtek/rtw88/rtw8703b.h
> new file mode 100644
> index 0000000000..f5ff23f2ee
> --- /dev/null
> +++ b/drivers/net/wireless/realtek/rtw88/rtw8703b.h
> @@ -0,0 +1,62 @@
> +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
> +/* Copyright Fiona Klute <fiona.klute@gmx.de> */
> +
> +#ifndef __RTW8703B_H__
> +#define __RTW8703B_H__
> +
> +extern const struct rtw_chip_info rtw8703b_hw_spec;
> +
> +/* phy status parsing */
> +#define GET_PHY_STAT_AGC_GAIN_A(phy_stat) \
> + (le32_get_bits(*((__le32 *)(phy_stat) + 0x00), GENMASK(6, 0)))
We are planning to use struct and le32_get_bits() directly, so don't introduce
this old style anymore. An example is
struct rtw8703b_phy_stat {
__le32 w0;
__le32 w1;
...
};
#define RTW8703B_PHY_STAT_W0_AGC_GAIN_A GENMASK(6, 0)
val_s8 = le32_get_bits(stat->w0, RTW8703B_PHY_STAT_W0_AGC_GAIN_A);
> +
> +#define GET_PHY_STAT_PWDB(phy_stat) \
> + le32_get_bits(*((__le32 *)(phy_stat) + 0x01), GENMASK(7, 0))
> +#define GET_PHY_STAT_VGA(phy_stat) \
> + le32_get_bits(*((__le32 *)(phy_stat) + 0x01), GENMASK(12, 8))
> +#define GET_PHY_STAT_LNA_L(phy_stat) \
> + le32_get_bits(*((__le32 *)(phy_stat) + 0x01), GENMASK(15, 13))
> +/* the high LNA stat bit if 4 bit format is used */
> +#define GET_PHY_STAT_LNA_H(phy_stat) \
> + le32_get_bits(*((__le32 *)(phy_stat) + 0x01), BIT(23))
> +#define BIT_LNA_H_MASK BIT(3)
> +#define BIT_LNA_L_MASK GENMASK(2, 0)
> +
> +#define GET_PHY_STAT_CFO_TAIL_A(phy_stat) \
> + (le32_get_bits(*((__le32 *)(phy_stat) + 0x02), GENMASK(15, 8)))
> +#define GET_PHY_STAT_RXEVM_A(phy_stat) \
> + (le32_get_bits(*((__le32 *)(phy_stat) + 0x03), GENMASK(15, 8)))
> +#define GET_PHY_STAT_RXSNR_A(phy_stat) \
> + (le32_get_bits(*((__le32 *)(phy_stat) + 0x03), GENMASK(31, 24)))
> +
> +/* Baseband registers */
> +#define REG_BB_PWR_SAV5_11N 0x0818
> +/* BIT(11) should be 1 for 8703B *and* 8723D, which means LNA uses 4
> + * bit for CCK rates in report, not 3. Vendor driver logs a warning if
> + * it's 0, but handles the case.
> + *
> + * Purpose of other parts of this register is unknown, 8723cs driver
> + * code indicates some other chips use certain bits for antenna
> + * diversity.
> + */
> +#define REG_BB_AMP 0x0950
> +#define BIT_MASK_RX_LNA (BIT(11))
> +
> +/* 0xaXX: 40MHz channel settings */
> +#define REG_CCK_TXSF2 0x0a24 /* CCK TX filter 2 */
> +#define REG_CCK_DBG 0x0a28 /* debug port */
> +#define REG_OFDM0_A_TX_AFE 0x0c84
> +#define REG_TXIQK_MATRIXB_LSB2_11N 0x0c9c
> +#define REG_OFDM0_TX_PSD_NOISE 0x0ce4 /* TX pseudo noise weighting */
> +/* is != 0 when IQK is done */
Is this comment for 0x0e90? move to rear of the line?
> +#define REG_IQK_RDY 0x0e90
> +
> +/* RF registers */
> +#define RF_RCK1 0x1E
> +
> +#define AGG_BURST_NUM 3
> +#define AGG_BURST_SIZE 0 /* 1K */
> +#define BIT_MASK_AGG_BURST_NUM (GENMASK(3, 2))
> +#define BIT_MASK_AGG_BURST_SIZE (GENMASK(5, 4))
> +
> +#endif /* __RTW8703B_H__ */
> --
> 2.43.0
>
next prev parent reply other threads:[~2024-02-05 2:25 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-02 12:10 [PATCH 0/9] rtw88: Add support for RTL8723CS/RTL8703B Fiona Klute
2024-02-02 12:10 ` [PATCH 1/9] wifi: rtw88: Shared module for rtw8723x devices Fiona Klute
2024-02-03 14:20 ` kernel test robot
2024-02-03 15:04 ` kernel test robot
2024-02-03 21:47 ` kernel test robot
2024-02-04 10:03 ` kernel test robot
2024-02-05 1:45 ` Ping-Ke Shih
2024-02-05 16:47 ` Fiona Klute
2024-02-06 0:59 ` Ping-Ke Shih
2024-02-02 12:10 ` [PATCH 2/9] wifi: rtw88: Debug output for rtw8723x EFUSE Fiona Klute
2024-02-05 2:17 ` Ping-Ke Shih
2024-02-05 17:10 ` Fiona Klute
2024-02-02 12:10 ` [PATCH 3/9] wifi: rtw88: Add definitions for 8703b chip Fiona Klute
2024-02-02 12:10 ` [PATCH 4/9] wifi: rtw88: Add rtw8703b.h Fiona Klute
2024-02-05 2:24 ` Ping-Ke Shih [this message]
2024-02-06 1:08 ` Fiona Klute
2024-02-06 2:02 ` Ping-Ke Shih
2024-02-02 12:10 ` [PATCH 5/9] wifi: rtw88: Add rtw8703b.c Fiona Klute
2024-02-05 3:01 ` Ping-Ke Shih
2024-02-05 19:06 ` Fiona Klute
2024-02-06 1:37 ` Ping-Ke Shih
2024-02-06 8:12 ` Pavel Machek
2024-02-07 5:58 ` Ping-Ke Shih
2024-02-02 12:10 ` [PATCH 6/9] wifi: rtw88: Add rtw8703b_tables.h Fiona Klute
2024-02-02 12:10 ` [PATCH 7/9] wifi: rtw88: Add rtw8703b_tables.c Fiona Klute
2024-02-02 12:10 ` [PATCH 8/9] wifi: rtw88: Reset 8703b firmware before download Fiona Klute
2024-02-05 3:05 ` Ping-Ke Shih
2024-02-02 12:10 ` [PATCH 9/9] wifi: rtw88: SDIO device driver for RTL8723CS Fiona Klute
2024-02-05 3:10 ` Ping-Ke Shih
2024-02-05 16:07 ` Ulf Hansson
2024-02-02 13:13 ` [PATCH 0/9] rtw88: Add support for RTL8723CS/RTL8703B Dmitry Antipov
2024-02-02 13:27 ` Fiona Klute
2024-02-02 13:54 ` Dmitry Antipov
2024-02-02 14:13 ` Fiona Klute
2024-02-02 20:19 ` Pavel Machek
2024-02-03 0:36 ` Fiona Klute
2024-02-02 20:44 ` Pavel Machek
2024-02-02 20:52 ` Pavel Machek
2024-02-03 11:33 ` Fiona Klute
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=64e338d9e0dd43e69fa2e6e1dd3ecb2c@realtek.com \
--to=pkshih@realtek.com \
--cc=fiona.klute@gmx.de \
--cc=kvalo@kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=megi@xff.cz \
--cc=pavel@ucw.cz \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox