* [PATCH V1] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER
@ 2025-07-16 10:43 Victor Shih
2025-07-24 11:07 ` Victor Shih
2025-07-24 11:59 ` Adrian Hunter
0 siblings, 2 replies; 4+ messages in thread
From: Victor Shih @ 2025-07-16 10:43 UTC (permalink / raw)
To: ulf.hansson, adrian.hunter
Cc: linux-mmc, linux-kernel, benchuanggli, ben.chuang, HL.Liu,
Victor Shih, Victor Shih
From: Victor Shih <victor.shih@genesyslogic.com.tw>
Due to a flaw in the hardware design, the GL9763e replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9763e
PCI config. Therefore, the replay timer timeout must be masked.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
---
drivers/mmc/host/sdhci-pci-gli.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 4c2ae71770f7..eb3954729a3c 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -1754,6 +1754,7 @@ static int gl9763e_add_host(struct sdhci_pci_slot *slot)
static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
{
struct pci_dev *pdev = slot->chip->pdev;
+ int aer;
u32 value;
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
@@ -1780,6 +1781,14 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
+ /* mask the replay timer timeout of AER */
+ aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
+ if (aer) {
+ pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
+ value |= PCI_ERR_COR_REP_TIMER;
+ pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
+ }
+
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
value &= ~GLI_9763E_VHS_REV;
value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
--
2.43.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH V1] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER
2025-07-16 10:43 [PATCH V1] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER Victor Shih
@ 2025-07-24 11:07 ` Victor Shih
2025-07-24 11:59 ` Adrian Hunter
1 sibling, 0 replies; 4+ messages in thread
From: Victor Shih @ 2025-07-24 11:07 UTC (permalink / raw)
To: ulf.hansson, adrian.hunter
Cc: linux-mmc, linux-kernel, benchuanggli, ben.chuang, HL.Liu,
Victor Shih
Hi, Ulf and Adrian
Please help to review this patch and let me know if there is anything
that needs to be modified.
Thanks.
Thanks, Victor Shih
On Wed, Jul 16, 2025 at 6:43 PM Victor Shih <victorshihgli@gmail.com> wrote:
>
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
>
> Due to a flaw in the hardware design, the GL9763e replay timer frequently
> times out when ASPM is enabled. As a result, the warning messages will
> often appear in the system log when the system accesses the GL9763e
> PCI config. Therefore, the replay timer timeout must be masked.
>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> ---
> drivers/mmc/host/sdhci-pci-gli.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index 4c2ae71770f7..eb3954729a3c 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -1754,6 +1754,7 @@ static int gl9763e_add_host(struct sdhci_pci_slot *slot)
> static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
> {
> struct pci_dev *pdev = slot->chip->pdev;
> + int aer;
> u32 value;
>
> pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
> @@ -1780,6 +1781,14 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
> value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
> pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
>
> + /* mask the replay timer timeout of AER */
> + aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
> + if (aer) {
> + pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
> + value |= PCI_ERR_COR_REP_TIMER;
> + pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
> + }
> +
> pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
> value &= ~GLI_9763E_VHS_REV;
> value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
> --
> 2.43.0
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH V1] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER
2025-07-16 10:43 [PATCH V1] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER Victor Shih
2025-07-24 11:07 ` Victor Shih
@ 2025-07-24 11:59 ` Adrian Hunter
2025-07-25 11:01 ` Victor Shih
1 sibling, 1 reply; 4+ messages in thread
From: Adrian Hunter @ 2025-07-24 11:59 UTC (permalink / raw)
To: Victor Shih, ulf.hansson
Cc: linux-mmc, linux-kernel, benchuanggli, ben.chuang, HL.Liu,
Victor Shih
On 16/07/2025 13:43, Victor Shih wrote:
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
>
> Due to a flaw in the hardware design, the GL9763e replay timer frequently
> times out when ASPM is enabled. As a result, the warning messages will
> often appear in the system log when the system accesses the GL9763e
> PCI config. Therefore, the replay timer timeout must be masked.
>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> ---
> drivers/mmc/host/sdhci-pci-gli.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index 4c2ae71770f7..eb3954729a3c 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -1754,6 +1754,7 @@ static int gl9763e_add_host(struct sdhci_pci_slot *slot)
> static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
> {
> struct pci_dev *pdev = slot->chip->pdev;
> + int aer;
> u32 value;
>
> pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
> @@ -1780,6 +1781,14 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
> value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
> pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
>
> + /* mask the replay timer timeout of AER */
> + aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
> + if (aer) {
> + pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
> + value |= PCI_ERR_COR_REP_TIMER;
> + pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
> + }
The same code is in gl9750_hw_setting() and gl9755_hw_setting()
so it could be a separate little function.
Also should gli_set_gl9763e() be renamed gl9763e_hw_setting() for
consistency?
Also should this have a fixes tag?
> +
> pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
> value &= ~GLI_9763E_VHS_REV;
> value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH V1] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER
2025-07-24 11:59 ` Adrian Hunter
@ 2025-07-25 11:01 ` Victor Shih
0 siblings, 0 replies; 4+ messages in thread
From: Victor Shih @ 2025-07-25 11:01 UTC (permalink / raw)
To: Adrian Hunter
Cc: ulf.hansson, linux-mmc, linux-kernel, benchuanggli, ben.chuang,
HL.Liu, Victor Shih
On Thu, Jul 24, 2025 at 7:59 PM Adrian Hunter <adrian.hunter@intel.com> wrote:
>
> On 16/07/2025 13:43, Victor Shih wrote:
> > From: Victor Shih <victor.shih@genesyslogic.com.tw>
> >
> > Due to a flaw in the hardware design, the GL9763e replay timer frequently
> > times out when ASPM is enabled. As a result, the warning messages will
> > often appear in the system log when the system accesses the GL9763e
> > PCI config. Therefore, the replay timer timeout must be masked.
> >
> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> > ---
> > drivers/mmc/host/sdhci-pci-gli.c | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > index 4c2ae71770f7..eb3954729a3c 100644
> > --- a/drivers/mmc/host/sdhci-pci-gli.c
> > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > @@ -1754,6 +1754,7 @@ static int gl9763e_add_host(struct sdhci_pci_slot *slot)
> > static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
> > {
> > struct pci_dev *pdev = slot->chip->pdev;
> > + int aer;
> > u32 value;
> >
> > pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
> > @@ -1780,6 +1781,14 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
> > value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
> > pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
> >
> > + /* mask the replay timer timeout of AER */
> > + aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
> > + if (aer) {
> > + pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
> > + value |= PCI_ERR_COR_REP_TIMER;
> > + pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
> > + }
>
> The same code is in gl9750_hw_setting() and gl9755_hw_setting()
> so it could be a separate little function.
>
> Also should gli_set_gl9763e() be renamed gl9763e_hw_setting() for
> consistency?
>
> Also should this have a fixes tag?
>
Hi, Adrian
Ok, I will update in the next version.
I think I should only need the stable tag.
Thanks, Victor Shih
> > +
> > pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
> > value &= ~GLI_9763E_VHS_REV;
> > value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2025-07-25 11:02 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-07-16 10:43 [PATCH V1] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER Victor Shih
2025-07-24 11:07 ` Victor Shih
2025-07-24 11:59 ` Adrian Hunter
2025-07-25 11:01 ` Victor Shih
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox