* Re: Wrong Characters in dosemu
2004-08-10 8:16 Wrong Characters in dosemu Bastian Schäfer
@ 2004-08-10 11:29 ` Claudia Neumann
0 siblings, 0 replies; 2+ messages in thread
From: Claudia Neumann @ 2004-08-10 11:29 UTC (permalink / raw)
To: Bastian Schäfer; +Cc: linux-msdos
[-- Attachment #1: Type: text/plain, Size: 816 bytes --]
Hi Bastian!
Am Dienstag, 10. August 2004 10:16 schrieben Sie:
> Both of these two ways work not properly.
> If I start it the dosemu <return> way, the environment looks not so good,
> and the Capitals 'A' and 'S' (<caps> + A and <caps> + S) can not be used
> (not shown by typing).
> This is on both, Server and Client as well. This seems to be a DOSEMU
> Problem.
>
> So I take the dosemu -X <return> to start dosemu in a XTerm.
> On the server everything is OK (Well, it runs better than original DOS,).
> But, if I type a '2' on the clinet (over vnc) I get a 'q' on the screen.
> '.' and some other characters are not at their origin place and do not
> work.
I don't know anything about vnc, but dosemu and Xdosemu work well with
my .dosemurc. Try this configuration (for german keyboard layout).
cu
Claudia
[-- Attachment #2: .dosemurc --]
[-- Type: text/plain, Size: 11031 bytes --]
##############################################################################
# This file is the system-wide dosemu.conf or the per-user ~/.dosemurc,
# included by global.conf or dosemu.bin.
#
# Linux DOSEMU configuration for parser versions >= 3 (dosemu-0.97.0.1)
#
# ./doc/README.txt (chapter 2.) contains a description of the syntax
# and the usage of dosemu.conf.
#
# The commented-out values are defaults, here for documentation purposes
# only.
#
# Access rights are defined in
#
# /etc/dosemu.users or /etc/dosemu/dosemu.users
#
##############################################################################
# Notes for editing this section:
#
# In $_xxx = (n) n is a numerical or boolean value
# = =
# In $_zzz = "s" s is a string
#
# Please edit only between the brackets and quotes and keep the rest intact.
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^
#
$_hdimage = "/home/praxis/.dosemu/drives/*"
# # List of hdimages or boot directories under
# # syshdimagedir (/var/lib/dosemu by default)
# # assigned in this order such as
# # "hdimage_c directory_d hdimage_e"
# # Absolute pathnames are also allowed.
# # If the name begins with '/dev/', then partion
# # access is done instead of virtual hdimage such as
# # "/dev/hda1" or "/dev/hda1:ro" for readonly
# # Currently mounted devices and swap are refused.
# # Hdimages and devices may be mixed such as
# # "hdimage_c /dev/hda1 /dev/hda3:ro"
# # Note: 'wholedisk' is _not_ supported.
#$_hdimage_r = $_hdimage # hdimages for 'restricted access (if different)
#$_vbootfloppy = "" # if you want to boot from a virtual floppy:
# # file name of the floppy image under DOSEMU_LIB_DIR
# # e.g. "floppyimage" disables $_hdimage
# # "floppyimage +hd" does _not_ disable $_hdimage
$_floppy_a ="threeinch" # or "fiveinch" or "atapi" or empty, if non-existant
# # optionally the device may be appended such as
# # "threeinch:/dev/fd0"
#$_floppy_b = "" # ditto for B:
#
#
$_debug = "-D+Dd" # same format as -D commandline option, ""="-a+cw".
# # (but without the -D in front), normally written to
# # ~/.dosemu/boot.log
#$_features= "" # list of temporary hacks, see release notes in
# # the file ChangeLog. e.g "0:1 2:0", which means
# # to set feature_0 to 1 and feature_2 to 0.
$_mapping= "mapshm" # preferred mapping driver, one of:
# # auto, mapself, mapfile, mapshm
#$_timint = (on) # emulate INT08 type timer interrupts
#$_mathco = (on) # or off
$_cpu = "80586" # CPU shown to DOS, valid values: "80[345]86"
# # or "emulated" for non-native CPU (386 in this case)
#
$_rdtsc = (on) # if possible use Pentium cycle counter
#$_cpuspeed = (0) # 0 = calibrated by dosemu, else given (e.g.166.666)
$_xms = (8192) # in Kbyte
$_ems = (2048) # in Kbyte
#$_ems_frame = (0xe000)
$_dpmi = (4000) # in Kbyte (default is 0 if running suid-root)
#$_dosmem = (640) # in Kbyte, < 640
#
#$_emusys = "" # empty or 3 char., config.sys -> config.XXX
#$_emuini = "" # empty or 3 char., system.ini -> system.XXX
#
$_hogthreshold = (10) # 0 == all CPU power to DOSEMU
$_term_char_set = "ibm" # Global code page and character set selection.
# # "" == automatic, else: ibm, latin, latin1, latin2,
# # koi8r
#
# # Character set used externally to dosemu
#$_external_char_set = ""
# # "" == use $_term_char_set one of else:
# # "cp437", "cp737", "cp775", "cp850", "cp852", "cp857",
# # "cp860", "cp861", "cp862", "cp863", "cp864", "cp865",
# # "cp866", "cp869", "cp874",
# # "iso8859-1", "iso8859-2", "iso8859-3", "iso8859-4",
# # "iso8859-5", "iso8859-6", "iso8859-7", "iso8859-8",
# # "iso8859_9", "iso8859-14", "iso8859-15", "koi8-r"
#
# # Character set used by dos programs
$_internal_char_set = "cp850"
# # "" == use $_term_char_set one of else:
# # "cp437", "cp737", "cp775", "cp850", "cp852", "cp857",
# # "cp860", "cp861", "cp862", "cp863", "cp864", "cp865",
# # "cp866", "cp869", "cp874"
#
$_term_color = (on) # terminal with color support
$_term_updfreq = (4) # time between refreshes (units: 20 == 1 second)
#$_escchar = (30) # 30 == Ctrl-^, special-sequence prefix
#
#$_rawkeyboard = (1) # bypass normal keyboard input on the Linux console,
# # maybe dangerous
$_layout = "de-latin1" # one of: finnish(-latin1), de(-latin1), be, it, us
# # uk, dk(-latin1), keyb-no, no-latin1, dvorak, po
# # sg(-latin1), fr(-latin1), sf(-latin1), es(-latin1)
# # sw, hu(-latin2), hu-cwi, keyb-user
# # hr-cp852, hr-latin2, cz-qwerty, cz-qwertz, ru, tr.
# # Or 'auto' (which tries to generate the table from
# # the current Linux console settings)
#$_toggle = "" # toggle alternate layout, one of "shift_shift",
# # "ctrl_shift", "alt_shift". "" == disable toggling
#
#
#$_X_updfreq = (5) # time between refreshes (units: 20 == 1 second)
$_X_title = "DOSemu" # Title in the top bar of the window
$_X_icon_name = "DOS" # Text for icon, when minimized
#$_X_keycode = (auto) # on == translate keyboard via dosemu keytables
# # or 'off' or 'auto'
$_X_blinkrate = (20) # blink rate for the cursor
#$_X_font = "vga" # basename from /usr/X11R6/lib/X11/fonts/misc/*
# # (without extension) e.g. "vga"
#$_X_mitshm = (on) # Use shared memory extensions
#$_X_sharecmap = (off) # share the colormap with other applications
#$_X_fixed_aspect = (on) # Set fixed aspect for resizing the graphics window
#$_X_aspect_43 = (on) # Always use an aspect ratio of 4:3 for graphics
#$_X_lin_filt = (off) # Use linear filtering for >15 bpp interpolation
#$_X_bilin_filt = (off) # Use bi-linear filtering for >15 bpp interpolation
#$_X_mode13fact = (2) # initial size factor for video mode 0x13 (320x200)
#$_X_winsize = "" # "x,y" of initial windows size (defaults to float)
#$_X_gamma = (1.0) # gamma correction
#$_X_vgaemu_memsize = (1024) # size (in Kbytes) of the frame buffer for emulated vga
#$_X_lfb = (on) # use linear frame buffer in VESA modes
#$_X_pm_interface = (on) # use protected mode interface for VESA modes
#$_X_mgrab_key = "Home" # KeySym name to activate mouse grab, empty == off
#$_X_vesamode = "" # "xres,yres ... xres,yres"
# # List of vesamodes to add. The list has to contain
# # SPACE separated "xres,yres" pairs
#
#
#
#$_aspi = "" # list of generic SCSI devices to make available
# # for the builtin aspi driver (format of an entry
# # is 'device:type:mappedtarget' such as
# # "sg2:WORM sg3:Sequential-Access:6 sg4:CD-ROM" or
# # "sg2:4 sg3:1:6 sg4:5" (which are equal)
#
$_com1 = "/dev/ttyS0" # e.g. "/dev/mouse" or "/dev/ttyS0"
#$_com2 = "" # e.g. "/dev/modem" or "/dev/ttyS1"
#$_com3 = "" # ditto "/dev/ttyS2"
#$_com4 = "" # ditto "/dev/ttyS3"
# # Note: all "/dev/ttyXX" may be suffixed by the IRQ
# # used (instead of the default one), such as
# # "/dev/ttyS2 irq 5" or "/dev/ttyS3 irq 9"
#
$_ttylocks = "/home/praxis/dosemu/lock"# Lock directory (e.g. "/var/lock")
#
$_mouse = "ps2" # one of: microsoft, mousesystems, logitech, mmseries
# # mouseman, hitachi, busmouse, ps2, imps2
$_mouse_dev = "/dev/mouse" # one of: com1, com2, com3, com4 or /dev/mouse
#$_mouse_flags = "" # empty list or one or more of:
# # "emulate3buttons cleardtr"
#$_mouse_baud = (0) # baudrate, 0 == don't set
#
$_printer = "lp" # list of (/etc/printcap) printer names to appear as
# # LPT1, LPT2, LPT3 (not all are needed, empty for none)
$_printer_timeout = (1)# idle time in seconds before spooling out
#
#$_sound = (on) # sound support on/off
#$_sb_base = (0x220)
#$_sb_irq = (5)
#$_sb_dma = (1)
#$_sb_dsp = "/dev/dsp"
#$_sb_mixer = "" # or "/dev/mixer" if you allow that dosemu
# # changes the volume
#$_mpu_base = (0x330)
#
#$_joy_device = "/dev/js0 /dev/js1" # 1st and 2nd joystick device
# # e.g. "/dev/js0" or "/dev/js0 /dev/js1"
# # (or "" if you don't want joystick support)
# #
#$_joy_dos_min = (1) # range for joystick axis readings, must be > 0
#$_joy_dos_max = (150) # avoid setting this to > 250
#$_joy_granularity = (1) # the higher, the less sensitive -
# # useful if you have a wobbly joystick
# #
#$_joy_latency = (0) # delay between nonblocking linux joystick reads
# # increases performance if >0 and processor>=Pentium
# # recommended: 1-50ms or 0 if unsure
#
#
# NOTE: IPX needs root privileges unless you setup /proc/net/ipx_route
# in advance.
#
#$_ipxsupport = (off) # or on
#
# NOTE: Network/packet driver support needs root privileges
#
#$_pktdriver = (off) # 'on' for Packet Driver
#$_novell_hack = (off)
#$_netdev = "eth0" # network device for Packet Driver
#$_vnet = (off) # 'on' for packet-multi
# # (used by dosnet, dsn0 overrides $_netdev)
#
# NOTE: all the settings below here are only valid in a system-wide dosemu.conf
# and cannot be changed by ~/.dosemurc. For these settings to take effect,
# DOSEMU must be run with root privileges.
#
#$_secure ="ngd" # secure for: n (normal users), g (guest), d (dexe)
# # empty string: depending on 'restricted'
# # "0": always insecure (not recommended)
#$_odd_hosts = "" # black list such as "lucifer.hell.com billy.the.cat"
#$_diskless_hosts="" # black list such as "hacker1 newbee gateway1"
#
#$_ports = "" # list of portnumbers such as "0x1ce 0x1cf 0x238"
# # or "0x1ce range 0x280,0x29f 310"
# # or "range 0x1a0,(0x1a0+15)"
#$_irqpassing = "" # list of IRQ numbers (2-15) to pass to DOS such as
# # "3 8 10"
#$_hardware_ram = "" # list of segment values/ranges such as
# # "0xc8000 range 0xcc000,0xcffff"
$_speaker = "emulated" # or "native" or "emulated"
$_pci = (on) # on: give access to the PCI configuration space
#
# The following settings apply to direct console video only and are
# ignored by xdosemu.
#
#$_video = "vga" # one of: plainvga, vga, ega, mda, mga, cga
#$_console = (1) # use 'console' video
$_graphics = (0) # use the cards BIOS to set graphics
$_videoportaccess = (1) # allow videoportaccess when 'graphics' enabled
#$_vbios_seg = (0) # set the address of your VBIOS (e.g. 0xc000, 0xe000)
#$_vbios_size = (0) # set the size of your BIOS (e.g. 0x10000, 0x8000).
# # 0 for $_vbios_seg/$_vbios_size means autodetection
# # (NOTE: DOSEMU must run in full feature mode for this)
#$_vmemsize = (1024) # size of regen buffer
#$_chipset = "plainvga" # one of: plainvga, trident, et4000, diamond, avance
# # cirrus, matrox, wdvga, paradise, ati, s3, sis,
# # svgalib
#$_dualmon = (0) # if you have one vga _plus_ one hgc (2 monitors)
^ permalink raw reply [flat|nested] 2+ messages in thread