* dos - linux and animator pro
@ 2003-05-10 4:09 Michael Russo
0 siblings, 0 replies; 2+ messages in thread
From: Michael Russo @ 2003-05-10 4:09 UTC (permalink / raw)
To: linux-msdos
Hello,
I am running Autodesk animator pro under xdosemu with free dos on
Redhat 8.0
All works great accept the graphic mouse in animator pro editor only
works in 1/4 of the graphic editor area.
I am usinf a USB mouse then I went to PS2 with no improvments.
I suspect that there is a syncronization issue. I run animator pro
in 1024x768 vesa mode. I have run it in other modes including 320x200
with the same problem. I am hoping you might have some idea what the
problem might be
Thanks,
Mike
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: dos - linux and animator pro
@ 2003-05-11 13:56 Clarence Dang
0 siblings, 0 replies; 2+ messages in thread
From: Clarence Dang @ 2003-05-11 13:56 UTC (permalink / raw)
To: Michael Russo, linux-msdos
On Sat, 10 May 2003 02:09 pm, Michael Russo wrote:
> Hello,
>
> I am running Autodesk animator pro under xdosemu with free dos on
> Redhat 8.0
> All works great accept the graphic mouse in animator pro editor only
> works in 1/4 of the graphic editor area.
> I am usinf a USB mouse then I went to PS2 with no improvments.
> I suspect that there is a syncronization issue. I run animator pro
> in 1024x768 vesa mode. I have run it in other modes including 320x200
> with the same problem. I am hoping you might have some idea what the
> problem might be
>
$_X_mgrab_key = "Home" in your dosemu.conf.
Then try CTRL+ALT+Home and see if that helps.
Cheers,
Clarence
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-05-11 13:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-05-10 4:09 dos - linux and animator pro Michael Russo
-- strict thread matches above, loose matches on Subject: below --
2003-05-11 13:56 Clarence Dang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox