* Re: dosemu crashes if started, while /dev/ttyS0 activity
@ 2005-05-26 3:58 Stas Sergeev
0 siblings, 0 replies; 2+ messages in thread
From: Stas Sergeev @ 2005-05-26 3:58 UTC (permalink / raw)
To: linux-msdos
Hello.
Hufnus wrote:
> If a device is sending rapid output to /dev/ttyS0 when dosemu
> starts or restarts, it crashes with the above error, consistently.
You should see what program
causes this. If you start dosemu
and bypass the config/autoexec
by pressing F5, does it still
crash?
^ permalink raw reply [flat|nested] 2+ messages in thread
* dosemu crashes if started, while /dev/ttyS0 activity
@ 2005-05-26 1:04 Hufnus
0 siblings, 0 replies; 2+ messages in thread
From: Hufnus @ 2005-05-26 1:04 UTC (permalink / raw)
To: linux-msdos
ERROR: general protection at 0xc239f: af
If a device is sending rapid output to /dev/ttyS0 when dosemu
starts or restarts, it crashes with the above error, consistently.
Any way around this problem?
Not using direct hardware access to the serial ports in
dosemu.conf
Tony Borras
--
__ __ _ I N C. http://www.sysdev.org
/ __|\\// __|| \ __ __ / tonyb@sysdev.org
\__ \ \/\__ \||)|/ O_)\/ / \/ System Tools / Utilities
|___/ || ___/|_ /\___|\_/ WIntel / Linux Device Drivers
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-05-26 3:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-26 3:58 dosemu crashes if started, while /dev/ttyS0 activity Stas Sergeev
-- strict thread matches above, loose matches on Subject: below --
2005-05-26 1:04 Hufnus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox