Re: [PATCH 2/2] dt: bindings: ath10k: Document qcom, ath10k-pre-calibration-data-mtd

Re: [PATCH 2/2] dt: bindings: ath10k: Document qcom, ath10k-pre-calibration-data-mtd

[Christian Lamparter]

On 2020-09-18 18:29, Ansuel Smith wrote:
> Document use of qcom,ath10k-pre-calibration-data-mtd bindings used to
> define from where the driver will load the pre-cal data in the defined
> mtd partition.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

Q: Doesn't mtd now come with nvmem support from the get go? So
the MAC-Addresses and pre-caldata could be specified as a
nvmem-node in the devicetree? I remember seeing that this was
worked on or was this mtd->nvmem dropped?

Cheers,
Christian

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

R: [PATCH 2/2] dt: bindings: ath10k: Document qcom, ath10k-pre-calibration-data-mtd

[ansuelsmth]

> -----Messaggio originale-----
> Da: Christian Lamparter <chunkeey@gmail.com>
> Inviato: venerdì 18 settembre 2020 18:54
> A: Ansuel Smith <ansuelsmth@gmail.com>; Kalle Valo
> <kvalo@codeaurora.org>
> Cc: devicetree@vger.kernel.org; netdev@vger.kernel.org; linux-
> wireless@vger.kernel.org; linux-kernel@vger.kernel.org;
> ath10k@lists.infradead.org; David S. Miller <davem@davemloft.net>; Rob
> Herring <robh+dt@kernel.org>; Jakub Kicinski <kuba@kernel.org>; linux-
> mtd@lists.infradead.org; Srinivas Kandagatla
> <srinivas.kandagatla@linaro.org>; Bartosz Golaszewski
> <bgolaszewski@baylibre.com>
> Oggetto: Re: [PATCH 2/2] dt: bindings: ath10k: Document qcom, ath10k-
> pre-calibration-data-mtd
> 
> On 2020-09-18 18:29, Ansuel Smith wrote:
> > Document use of qcom,ath10k-pre-calibration-data-mtd bindings used to
> > define from where the driver will load the pre-cal data in the defined
> > mtd partition.
> >
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> 
> Q: Doesn't mtd now come with nvmem support from the get go? So
> the MAC-Addresses and pre-caldata could be specified as a
> nvmem-node in the devicetree? I remember seeing that this was
> worked on or was this mtd->nvmem dropped?
> 
> Cheers,
> Christian

Can you give me some example where this is used? I can't find any reference.


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

R: [PATCH 2/2] dt: bindings: ath10k: Document qcom, ath10k-pre-calibration-data-mtd

[ansuelsmth]

> -----Messaggio originale-----
> Da: Christian Lamparter <chunkeey@gmail.com>
> Inviato: venerdì 18 settembre 2020 18:54
> A: Ansuel Smith <ansuelsmth@gmail.com>; Kalle Valo
> <kvalo@codeaurora.org>
> Cc: devicetree@vger.kernel.org; netdev@vger.kernel.org; linux-
> wireless@vger.kernel.org; linux-kernel@vger.kernel.org;
> ath10k@lists.infradead.org; David S. Miller <davem@davemloft.net>; Rob
> Herring <robh+dt@kernel.org>; Jakub Kicinski <kuba@kernel.org>; linux-
> mtd@lists.infradead.org; Srinivas Kandagatla
> <srinivas.kandagatla@linaro.org>; Bartosz Golaszewski
> <bgolaszewski@baylibre.com>
> Oggetto: Re: [PATCH 2/2] dt: bindings: ath10k: Document qcom, ath10k-
> pre-calibration-data-mtd
> 
> On 2020-09-18 18:29, Ansuel Smith wrote:
> > Document use of qcom,ath10k-pre-calibration-data-mtd bindings used to
> > define from where the driver will load the pre-cal data in the defined
> > mtd partition.
> >
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> 
> Q: Doesn't mtd now come with nvmem support from the get go? So
> the MAC-Addresses and pre-caldata could be specified as a
> nvmem-node in the devicetree? I remember seeing that this was
> worked on or was this mtd->nvmem dropped?
> 
> Cheers,
> Christian

Sorry a lot for the double email... I think I found what you are talking about.
It looks like the code was merged but not the documentation.
Will do some test and check if this works.

This should be the related patch.
https://patchwork.ozlabs.org/project/linux-mtd/patch/1521933899-362-4-git-send-email-albeu@free.fr/



______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: R: [PATCH 2/2] dt: bindings: ath10k: Document qcom, ath10k-pre-calibration-data-mtd

[Christian Lamparter]

On 2020-09-18 20:31, ansuelsmth@gmail.com wrote:
> 
> 
>> -----Messaggio originale-----
>> Da: Christian Lamparter <chunkeey@gmail.com>
>> Inviato: venerdì 18 settembre 2020 18:54
>> A: Ansuel Smith <ansuelsmth@gmail.com>; Kalle Valo
>> <kvalo@codeaurora.org>
>> Cc: devicetree@vger.kernel.org; netdev@vger.kernel.org; linux-
>> wireless@vger.kernel.org; linux-kernel@vger.kernel.org;
>> ath10k@lists.infradead.org; David S. Miller <davem@davemloft.net>; Rob
>> Herring <robh+dt@kernel.org>; Jakub Kicinski <kuba@kernel.org>; linux-
>> mtd@lists.infradead.org; Srinivas Kandagatla
>> <srinivas.kandagatla@linaro.org>; Bartosz Golaszewski
>> <bgolaszewski@baylibre.com>
>> Oggetto: Re: [PATCH 2/2] dt: bindings: ath10k: Document qcom, ath10k-
>> pre-calibration-data-mtd
>>
>> On 2020-09-18 18:29, Ansuel Smith wrote:
>>> Document use of qcom,ath10k-pre-calibration-data-mtd bindings used to
>>> define from where the driver will load the pre-cal data in the defined
>>> mtd partition.
>>>
>>> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
>>
>> Q: Doesn't mtd now come with nvmem support from the get go? So
>> the MAC-Addresses and pre-caldata could be specified as a
>> nvmem-node in the devicetree? I remember seeing that this was
>> worked on or was this mtd->nvmem dropped?
>>
>> Cheers,
>> Christian
> 
> Sorry a lot for the double email... I think I found what you are talking about.
> It looks like the code was merged but not the documentation.
> Will do some test and check if this works.
> 
> This should be the related patch.
> https://patchwork.ozlabs.org/project/linux-mtd/patch/1521933899-362-4-git-send-email-albeu@free.fr/
> 

Well, I guess the version that was merged:

|commit c4dfa25ab307a277eafa7067cd927fbe4d9be4ba
|Author: Alban Bedel <albeu@free.fr>
|Date:   Tue Nov 13 15:01:10 2018 +0100
|
|    mtd: add support for reading MTD devices via the nvmem API
|
|    Allow drivers that use the nvmem API to read data stored on MTD devices.
|    For this the mtd devices are registered as read-only NVMEM providers.
|
| >>>We don't support device tree systems for now.<<<

answers this. Sorry for the noise. Yee, this likely isn't going to work
as it is still disabled on purpose.

Regards,
Christian

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/