[PATCH 06/11] mtd: Remove redundant spi driver bus initialization

[PATCH 06/11] mtd: Remove redundant spi driver bus initialization

[Lars-Peter Clausen]

In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
	.driver = {
-		.bus = &spi_bus_type,
	},
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-mtd@lists.infradead.org
---
 drivers/mtd/devices/m25p80.c        |    1 -
 drivers/mtd/devices/mtd_dataflash.c |    1 -
 drivers/mtd/devices/sst25l.c        |    1 -
 3 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 884904d..7c60ddd 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -992,7 +992,6 @@ static int __devexit m25p_remove(struct spi_device *spi)
 static struct spi_driver m25p80_driver = {
 	.driver = {
 		.name	= "m25p80",
-		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 	},
 	.id_table	= m25p_ids,
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index d75c7af..236057e 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -936,7 +936,6 @@ static int __devexit dataflash_remove(struct spi_device *spi)
 static struct spi_driver dataflash_driver = {
 	.driver = {
 		.name		= "mtd_dataflash",
-		.bus		= &spi_bus_type,
 		.owner		= THIS_MODULE,
 		.of_match_table = dataflash_dt_ids,
 	},
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index d38ef3b..e45f62e 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -444,7 +444,6 @@ static int __devexit sst25l_remove(struct spi_device *spi)
 static struct spi_driver sst25l_driver = {
 	.driver = {
 		.name	= "sst25l",
-		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 	},
 	.probe		= sst25l_probe,
-- 
1.7.7.1

Re: [PATCH 06/11] mtd: Remove redundant spi driver bus initialization

[Artem Bityutskiy]

On Thu, 2011-11-24 at 16:29 +0100, Lars-Peter Clausen wrote:
> In ancient times it was necessary to manually initialize the bus field of an
> spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
> so we can drop the manual assignment.

Pushed to l2-mtd-2.6.git, thanks!

Artem.