From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: "Hauke Mehrtens" <hauke@hauke-m.de>, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [RFC 3/3] mtd: bcm47xxnflash: prepare for adding BCMA driver
Date: Sun, 23 Feb 2014 12:26:59 +0100 [thread overview]
Message-ID: <1393154819-7369-4-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1393154819-7369-1-git-send-email-zajec5@gmail.com>
---
drivers/mtd/nand/Kconfig | 7 +++++
drivers/mtd/nand/bcm47xxnflash/main.c | 56 +++++++++++++++++++++++++++++++++--
2 files changed, 60 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a3e8ad2..fecde1e 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -405,6 +405,13 @@ config MTD_NAND_BCM47XXNFLASH_PLATFORM
most common was BCM4706, but it rarely could be also found on
BCM5357.
+config MTD_NAND_BCM47XXNFLASH_BCMA
+ bool "NAND attached to BCMA as standalone core"
+ depends on MTD_NAND_BCM47XXNFLASH && BROKEN
+ help
+ New SoCs (most probably only these ARM based) have NAND
+ flash as separated bus core.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
depends on HAS_IOMEM
diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c
index c9d9b3f..aebe2d5 100644
--- a/drivers/mtd/nand/bcm47xxnflash/main.c
+++ b/drivers/mtd/nand/bcm47xxnflash/main.c
@@ -80,6 +80,36 @@ static struct platform_driver bcm47xxnflash_driver = {
#endif
/**************************************************
+ * BCMA
+ **************************************************/
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BCM47XXNFLASH_BCMA)
+static const struct bcma_device_id bcm47xxnflash_bcma_tbl[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NAND, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORETABLE_END
+};
+MODULE_DEVICE_TABLE(bcma, bcm47xxnflash_bcma_tbl);
+
+static int bcm47xxnflash_bcma_probe(struct bcma_device *core)
+{
+ pr_info("Device ID: 0x%08X\n", bcma_read32(core, 0x194));
+
+ return -ENOTSUPP;
+}
+
+static void bcm47xxnflash_bcma_remove(struct bcma_device *core)
+{
+}
+
+static struct bcma_driver bcm47xxnflash_bcma_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = bcm47xxnflash_bcma_tbl,
+ .probe = bcm47xxnflash_bcma_probe,
+ .remove = bcm47xxnflash_bcma_remove,
+};
+#endif
+
+/**************************************************
* Init & exit
**************************************************/
@@ -89,16 +119,36 @@ static int __init bcm47xxnflash_init(void)
#if IS_ENABLED(CONFIG_MTD_NAND_BCM47XXNFLASH_PLATFORM)
err = platform_driver_register(&bcm47xxnflash_driver);
- if (err)
- pr_err("Failed to register bcm47xx nand flash driver: %d\n",
- err);
+ if (err) {
+ pr_err("Failed to register platform driver: %d\n", err);
+ return err;
+ }
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BCM47XXNFLASH_BCMA)
+ err = bcma_driver_register(&bcm47xxnflash_bcma_driver);
+ if (err) {
+ pr_err("Failed to register bcma driver: %d\n", err);
+ goto err_plat_unregister;
+ }
#endif
+ return 0;
+
+#if IS_ENABLED(CONFIG_MTD_NAND_BCM47XXNFLASH_BCMA)
+err_plat_unregister:
+#endif
+#if IS_ENABLED(CONFIG_MTD_NAND_BCM47XXNFLASH_PLATFORM)
+ platform_driver_unregister(&bcm47xxnflash_driver);
+#endif
return err;
}
static void __exit bcm47xxnflash_exit(void)
{
+#if IS_ENABLED(CONFIG_MTD_NAND_BCM47XXNFLASH_BCMA)
+ bcma_driver_unregister(&bcm47xxnflash_bcma_driver);
+#endif
#if IS_ENABLED(CONFIG_MTD_NAND_BCM47XXNFLASH_PLATFORM)
platform_driver_unregister(&bcm47xxnflash_driver);
#endif
--
1.8.4.5
next prev parent reply other threads:[~2014-02-23 11:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-23 11:26 [RFC 0/3] mtd: bcm47xxnflash: adding support for new NANDs Rafał Miłecki
2014-02-23 11:26 ` [RFC 1/3] Revert "mtd: bcm47xxnflash: Use module_platform_driver" Rafał Miłecki
2014-02-23 11:26 ` [RFC 2/3] mtd: bcm47xxnflash: add separated config for platform driver Rafał Miłecki
2014-02-23 11:26 ` Rafał Miłecki [this message]
2014-02-23 11:31 ` [RFC 0/3] mtd: bcm47xxnflash: adding support for new NANDs Hauke Mehrtens
2014-02-26 3:09 ` Brian Norris
-- strict thread matches above, loose matches on Subject: below --
2014-02-23 11:34 [RFC 3/3] mtd: bcm47xxnflash: prepare for adding BCMA driver Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393154819-7369-4-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=hauke@hauke-m.de \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox