From: Pekon Gupta <pekon@ti.com>
To: Brian Norris <computersforpeace@gmail.com>
Cc: Stefan Roese <sr@denx.de>,
linux-mtd <linux-mtd@lists.infradead.org>,
Pekon Gupta <pekon@ti.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Subject: [PATCH v8 2/4] mtd: devices: elm: clean elm_load_syndrome
Date: Thu, 20 Mar 2014 18:48:35 +0530 [thread overview]
Message-ID: <1395321517-4490-3-git-send-email-pekon@ti.com> (raw)
In-Reply-To: <1395321517-4490-1-git-send-email-pekon@ti.com>
This patch refactors elm_load_syndrome() to make it scalable for newer
ECC schemes by removing scheme specific macros (like ECC_BYTES*xx),
and instead using ECC control information passed during elm_config.
Signed-off-by: Pekon Gupta <pekon@ti.com>
---
drivers/mtd/devices/elm.c | 18 +++++++++++-------
include/linux/platform_data/elm.h | 7 -------
2 files changed, 11 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/devices/elm.c b/drivers/mtd/devices/elm.c
index c51752a..4fbfaf6 100644
--- a/drivers/mtd/devices/elm.c
+++ b/drivers/mtd/devices/elm.c
@@ -84,6 +84,7 @@ struct elm_info {
struct list_head list;
enum bch_ecc bch_type;
struct elm_registers elm_regs;
+ int ecc_syndrome_size;
};
static LIST_HEAD(elm_devices);
@@ -126,7 +127,8 @@ int elm_config(struct device *dev, enum bch_ecc bch_type,
reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16);
elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val);
- info->bch_type = bch_type;
+ info->bch_type = bch_type;
+ info->ecc_syndrome_size = ecc_syndrome_size;
return 0;
}
@@ -175,10 +177,8 @@ static void elm_load_syndrome(struct elm_info *info,
elm_configure_page_mode(info, i, true);
offset = ELM_SYNDROME_FRAGMENT_0 +
SYNDROME_FRAGMENT_REG_SIZE * i;
-
- /* BCH8 */
- if (info->bch_type) {
-
+ switch (info->bch_type) {
+ case BCH8_ECC:
/* syndrome fragment 0 = ecc[9-12B] */
val = cpu_to_be32(*(u32 *) &ecc[9]);
elm_write_reg(info, offset, val);
@@ -197,7 +197,8 @@ static void elm_load_syndrome(struct elm_info *info,
offset += 4;
val = ecc[0];
elm_write_reg(info, offset, val);
- } else {
+ break;
+ case BCH4_ECC:
/* syndrome fragment 0 = ecc[20-52b] bits */
val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) |
((ecc[2] & 0xf) << 28);
@@ -207,11 +208,14 @@ static void elm_load_syndrome(struct elm_info *info,
offset += 4;
val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12;
elm_write_reg(info, offset, val);
+ break;
+ default:
+ pr_err("invalid config bch_type\n");
}
}
/* Update ecc pointer with ecc byte size */
- ecc += info->bch_type ? BCH8_SIZE : BCH4_SIZE;
+ ecc += info->ecc_syndrome_size;
}
}
diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h
index 6e37156..4edb406 100644
--- a/include/linux/platform_data/elm.h
+++ b/include/linux/platform_data/elm.h
@@ -26,13 +26,6 @@ enum bch_ecc {
/* ELM support 8 error syndrome process */
#define ERROR_VECTOR_MAX 8
-#define BCH8_ECC_OOB_BYTES 13
-#define BCH4_ECC_OOB_BYTES 7
-/* RBL requires 14 byte even though BCH8 uses only 13 byte */
-#define BCH8_SIZE (BCH8_ECC_OOB_BYTES + 1)
-/* Uses 1 extra byte to handle erased pages */
-#define BCH4_SIZE (BCH4_ECC_OOB_BYTES + 1)
-
/**
* struct elm_errorvec - error vector for elm
* @error_reported: set true for vectors error is reported
--
1.8.5.1.163.gd7aced9
next prev parent reply other threads:[~2014-03-20 13:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-20 13:18 [PATCH v8 0/4] mtd: devices: elm: add checks ELM H/W constrains, driver code cleanup Pekon Gupta
2014-03-20 13:18 ` [PATCH v8 1/4] mtd: devices: elm: check for hardware engine's design constraints Pekon Gupta
2014-03-20 13:18 ` Pekon Gupta [this message]
2014-03-20 13:18 ` [PATCH v8 3/4] mtd: devices: elm: configure parallel channels based on ecc_steps Pekon Gupta
2014-03-20 13:18 ` [PATCH v8 4/4] mtd: devices: elm: update DRIVER_NAME as "omap-elm" Pekon Gupta
2014-03-20 13:48 ` [PATCH v8 0/4] mtd: devices: elm: add checks ELM H/W constrains, driver code cleanup Ezequiel Garcia
2014-03-26 6:12 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395321517-4490-3-git-send-email-pekon@ti.com \
--to=pekon@ti.com \
--cc=computersforpeace@gmail.com \
--cc=ezequiel.garcia@free-electrons.com \
--cc=linux-mtd@lists.infradead.org \
--cc=sr@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox