public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
To: Pekon Gupta <pekon@ti.com>
Cc: Stefan Roese <sr@denx.de>,
	Brian Norris <computersforpeace@gmail.com>,
	linux-mtd <linux-mtd@lists.infradead.org>
Subject: Re: [PATCH v8 0/4] mtd: devices: elm: add checks ELM H/W constrains, driver code cleanup
Date: Thu, 20 Mar 2014 10:48:28 -0300	[thread overview]
Message-ID: <20140320134828.GA1585@arch.cereza> (raw)
In-Reply-To: <1395321517-4490-1-git-send-email-pekon@ti.com>

On Mar 20, Pekon Gupta wrote:
> *changes v7 -> v8*
> Incorporated feedbacks from Brian Norris <computersforpeace@gmail.com>
>  - renamed ecc_step_bytes -> ecc_syndrome_size
> 
> 
> *changes v6 -> v7*
> Incorporated feedbacks from Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
>  - using dev_err() instead of pr_err()
>  - moved un-related addition of info->ecc_steps, info->ecc_step_bytes,
>    info->ecc_step_size from [PATCH v6 1/4] into subsequent patches
>  - dropped pr_fmt() change
> 
> 
> *changes v5 -> v6*
> [PATCH 02/04] minor cleanup
> 
> *changes v4 -> v5*
> This patch series is split version from earlier series [1].
> This series refactors and cleans ELM driver which is used by Hardware
> based BCHx ecc-schemes.
>  - Undo: introduction of 'struct mtd_info' and 'struct nand_chip'. Instead
>          keep ELM driver independent of mtd_info and nand_chip structs and
>          pass only required ECC configurations as elm_config() arguments
>          elm_config(..., int ecc_steps, int ecc_step_size, int ecc_step_bytes)
>  - Undo: re-writing of elm_load_syndrome() ECC register configurations.
> 
> *changes v3 -> v4 [1]*
>  - in-corporated feedbacks from Brian Norris <computersforpeace@gmail.com>
>  - updated: use 'pr_fmt(fmt)' to suffix DRIVER_NAME
>  - removed: local 'eccsteps' in ELM driver, instead using nand_chip->ecc.steps
>  - undo: irrelavant white-space changes
> 
> [1] http://lists.infradead.org/pipermail/linux-mtd/2013-November/050242.html
> 
> Pekon Gupta (4):
>   mtd: devices: elm: check for hardware engine's design constraints
>   mtd: devices: elm: clean elm_load_syndrome
>   mtd: devices: elm: configure parallel channels based on ecc_steps
>   mtd: devices: elm: update DRIVER_NAME as "omap-elm"
> 

For the whole series:

Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com

  parent reply	other threads:[~2014-03-20 13:49 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-20 13:18 [PATCH v8 0/4] mtd: devices: elm: add checks ELM H/W constrains, driver code cleanup Pekon Gupta
2014-03-20 13:18 ` [PATCH v8 1/4] mtd: devices: elm: check for hardware engine's design constraints Pekon Gupta
2014-03-20 13:18 ` [PATCH v8 2/4] mtd: devices: elm: clean elm_load_syndrome Pekon Gupta
2014-03-20 13:18 ` [PATCH v8 3/4] mtd: devices: elm: configure parallel channels based on ecc_steps Pekon Gupta
2014-03-20 13:18 ` [PATCH v8 4/4] mtd: devices: elm: update DRIVER_NAME as "omap-elm" Pekon Gupta
2014-03-20 13:48 ` Ezequiel Garcia [this message]
2014-03-26  6:12   ` [PATCH v8 0/4] mtd: devices: elm: add checks ELM H/W constrains, driver code cleanup Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140320134828.GA1585@arch.cereza \
    --to=ezequiel.garcia@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=pekon@ti.com \
    --cc=sr@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox