public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Oleksij Rempel <linux@rempel-privat.de>
Cc: computersforpeace@gmail.com, linux-mtd@lists.infradead.org
Subject: Re: [PATCH RFC v2] mtd: nand: add asm9260 NFC driver
Date: Tue, 30 Dec 2014 20:09:46 +0100	[thread overview]
Message-ID: <20141230200946.277c56c0@bbrezillon> (raw)
In-Reply-To: <1419962972-5845-1-git-send-email-linux@rempel-privat.de>

Hi Oleksij,

I haven't reviewed the driver code yet, but highlighted warnings
reported by checkpatch.
I'll try to give a full review soon.

On Tue, 30 Dec 2014 19:09:32 +0100
Oleksij Rempel <linux@rempel-privat.de> wrote:

> Add driver for Nand Flash Controller used on Alphascales ASM9260 chips.
> The IP core of this controller has some similarities with
> Evatronix NANDFLASH-CTRL IP (unkown revision), so probably it can be reused

WARNING: 'unkown' may be misspelled - perhaps 'unknown'?
#20: 
Evatronix NANDFLASH-CTRL IP (unkown revision), so probably it can be
reused

> by some other SoCs.
> 
> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
> ---
>  drivers/mtd/nand/Kconfig        |   7 +
>  drivers/mtd/nand/Makefile       |   1 +
>  drivers/mtd/nand/asm9260_nand.c | 989 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 997 insertions(+)
>  create mode 100644 drivers/mtd/nand/asm9260_nand.c
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index dd10646..580a608 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -41,6 +41,13 @@ config MTD_SM_COMMON
>  	tristate
>  	default n
>  
> +config MTD_NAND_ASM9260
> +	tristate "NFC support for ASM9260 SoC"
> +	depends on OF
> +	default n
> +	help
> +	  Enable support for the NAND controller found on Alphascale ASM9260 SoC.
> +
>  config MTD_NAND_DENALI
>          tristate "Support Denali NAND controller"
>          depends on HAS_DMA
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 9c847e4..08d660a 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile

[...]

> +
> +static int __init asm9260_nand_cached_config(struct asm9260_nand_priv *priv)
> +{
> +	struct nand_chip *nand = &priv->nand;
> +	struct mtd_info *mtd = &priv->mtd;
> +	u32 addr_cycles, col_cycles, pages_per_block;
> +
> +	pages_per_block = mtd->erasesize / mtd->writesize;
> +	/* max 256P, min 32P */
> +	if (pages_per_block & ~(0x000001e0)) {
> +		dev_err(priv->dev, "Unsuported erasesize 0x%x\n",

WARNING: 'Unsuported' may be misspelled - perhaps 'Unsupported'?
#732: FILE: drivers/mtd/nand/asm9260_nand.c:666:
+		dev_err(priv->dev, "Unsuported erasesize 0x%x\n",

> +				mtd->erasesize);
> +		return -EINVAL;
> +	}
> +
> +	/* max 32K, min 256. */
> +	if (mtd->writesize & ~(0x0000ff00)) {
> +		dev_err(priv->dev, "Unsuported writesize 0x%x\n",

Ditto

> +				mtd->erasesize);
> +		return -EINVAL;
> +	}
> +

[...]

> +
> +	return 0;
> +}
> +
> +static const struct of_device_id asm9260_nand_match[] = {
> +	{
> +		.compatible   = "alphascale,asm9260-nand",

WARNING: DT compatible string "alphascale,asm9260-nand" appears
un-documented -- check ./Documentation/devicetree/bindings/ #1036:
FILE: drivers/mtd/nand/asm9260_nand.c:970:
+		.compatible   = "alphascale,asm9260-nand",


Add a patch documenting the DT bindings used by your driver.


WARNING: DT compatible string vendor "alphascale" appears un-documented
-- check ./Documentation/devicetree/bindings/vendor-prefixes.txt #1036:
FILE: drivers/mtd/nand/asm9260_nand.c:970:
+		.compatible   = "alphascale,asm9260-nand",


Regards,

Boris
-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

  reply	other threads:[~2014-12-30 19:10 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-17 11:45 [PATCH RFC] Alphascale ASM9260 NAND controller driver Oleksij Rempel
2014-12-17 11:45 ` [PATCH RFC] mtd: nand: add asm9260 NFC driver Oleksij Rempel
2014-12-17 16:15   ` Boris Brezillon
2014-12-30 18:09     ` [PATCH RFC v2] " Oleksij Rempel
2014-12-30 19:09       ` Boris Brezillon [this message]
2014-12-31 12:58         ` [PATCH v3 1/3] " Oleksij Rempel
2014-12-31 12:58         ` Oleksij Rempel
2014-12-31 12:58           ` [PATCH v3 2/3] mtd: nand: add asm9260-nand devicetree documentation Oleksij Rempel
2014-12-31 17:01             ` Boris Brezillon
2014-12-31 12:58           ` [PATCH v3 3/3] mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table Oleksij Rempel
2014-12-31 16:55             ` Boris Brezillon
2015-08-25 19:25             ` Brian Norris
2015-08-26  4:00               ` Oleksij Rempel
2015-09-01 21:29                 ` Brian Norris
2014-12-31 16:48           ` [PATCH v3 1/3] mtd: nand: add asm9260 NFC driver Boris Brezillon
2014-12-31 17:26             ` Boris Brezillon
2015-01-01 20:18             ` Oleksij Rempel
2015-01-01 21:03               ` Boris Brezillon
2015-01-01 12:58           ` Boris Brezillon
2015-01-01 21:14           ` Boris Brezillon
2014-12-17 13:24 ` [PATCH RFC] Alphascale ASM9260 NAND controller driver Boris Brezillon
2014-12-17 14:36   ` Oleksij Rempel
2014-12-17 15:01     ` Oleksij Rempel
2014-12-17 15:01     ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141230200946.277c56c0@bbrezillon \
    --to=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux@rempel-privat.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox