* [PATCH 0/2] mtd: spi-nor: add new device MT35X
@ 2015-12-10 1:58 Karl Zhang
2015-12-10 1:58 ` [PATCH 1/2] mtd: spi-nor: add Manufacturer ID for Micron Karl Zhang
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Karl Zhang @ 2015-12-10 1:58 UTC (permalink / raw)
To: computersforpeace, dwmw2, linux-mtd
Cc: peterpandong, beanhuo, zszubbocsev, Karl Zhang
Micron has announced a new SPI NOR device MT35X (XTRMFlash).
This device's manufacturer ID is using 2Ch which arranged by
JEDEC. The 20h is also Micron's ID due to the history.
This new device support high speed I/O interface. The clock
frequency could up to 200 MHz (MAX) in DDR (400 MB/s) with
DQS. The device bus width could be 1 or 8, and it's default
width is configurable.
Karl Zhang (2):
mtd: spi-nor: add Manufacturer ID for Micron
mtd: spi-nor: add new device MT35X
drivers/mtd/devices/m25p80.c | 1 +
drivers/mtd/spi-nor/spi-nor.c | 2 ++
include/linux/mtd/cfi.h | 1 +
include/linux/mtd/spi-nor.h | 2 ++
4 files changed, 6 insertions(+)
--
1.9.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 1/2] mtd: spi-nor: add Manufacturer ID for Micron 2015-12-10 1:58 [PATCH 0/2] mtd: spi-nor: add new device MT35X Karl Zhang @ 2015-12-10 1:58 ` Karl Zhang 2015-12-10 2:45 ` Brian Norris 2015-12-10 1:59 ` [PATCH 2/2] mtd: spi-nor: add new device MT35X Karl Zhang 2015-12-10 2:46 ` [PATCH 0/2] " Brian Norris 2 siblings, 1 reply; 10+ messages in thread From: Karl Zhang @ 2015-12-10 1:58 UTC (permalink / raw) To: computersforpeace, dwmw2, linux-mtd Cc: peterpandong, beanhuo, zszubbocsev, Karl Zhang Micron Manufacturer ID assigned by JEDEC is 2Ch. Add this ID, for new Spi NOR from Micron. ST's ID(20h) is Micron due to the history. Signed-off-by: Karl Zhang <karlzhang@micron.com> --- include/linux/mtd/cfi.h | 1 + include/linux/mtd/spi-nor.h | 2 ++ 2 files changed, 3 insertions(+) diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 9b57a9b..cbf7716 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -377,6 +377,7 @@ struct cfi_fixup { #define CFI_MFR_SHARP 0x00B0 #define CFI_MFR_SST 0x00BF #define CFI_MFR_ST 0x0020 /* STMicroelectronics */ +#define CFI_MFR_MICRON 0x002C /* Micron */ #define CFI_MFR_TOSHIBA 0x0098 #define CFI_MFR_WINBOND 0x00DA diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index fac3f6f..b858e93 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -22,6 +22,8 @@ */ #define SNOR_MFR_ATMEL CFI_MFR_ATMEL #define SNOR_MFR_INTEL CFI_MFR_INTEL +/* Micron Manufacturer ID assigned by JEDEC */ +#define SNOR_MFR_MICRON_JEDEC CFI_MFR_MICRON #define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> Micron */ #define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX #define SNOR_MFR_SPANSION CFI_MFR_AMD -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] mtd: spi-nor: add Manufacturer ID for Micron 2015-12-10 1:58 ` [PATCH 1/2] mtd: spi-nor: add Manufacturer ID for Micron Karl Zhang @ 2015-12-10 2:45 ` Brian Norris 2015-12-10 3:00 ` Karl Zhang 张双锣 (karlzhang) 0 siblings, 1 reply; 10+ messages in thread From: Brian Norris @ 2015-12-10 2:45 UTC (permalink / raw) To: Karl Zhang Cc: dwmw2, linux-mtd, peterpandong, beanhuo, zszubbocsev, Karl Zhang On Thu, Dec 10, 2015 at 01:58:59AM +0000, Karl Zhang wrote: > Micron Manufacturer ID assigned by JEDEC is 2Ch. > Add this ID, for new Spi NOR from Micron. > > ST's ID(20h) is Micron due to the history. > > Signed-off-by: Karl Zhang <karlzhang@micron.com> > --- > include/linux/mtd/cfi.h | 1 + > include/linux/mtd/spi-nor.h | 2 ++ > 2 files changed, 3 insertions(+) > > diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h > index 9b57a9b..cbf7716 100644 > --- a/include/linux/mtd/cfi.h > +++ b/include/linux/mtd/cfi.h > @@ -377,6 +377,7 @@ struct cfi_fixup { > #define CFI_MFR_SHARP 0x00B0 > #define CFI_MFR_SST 0x00BF > #define CFI_MFR_ST 0x0020 /* STMicroelectronics */ > +#define CFI_MFR_MICRON 0x002C /* Micron */ > #define CFI_MFR_TOSHIBA 0x0098 > #define CFI_MFR_WINBOND 0x00DA > > diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h > index fac3f6f..b858e93 100644 > --- a/include/linux/mtd/spi-nor.h > +++ b/include/linux/mtd/spi-nor.h > @@ -22,6 +22,8 @@ > */ > #define SNOR_MFR_ATMEL CFI_MFR_ATMEL > #define SNOR_MFR_INTEL CFI_MFR_INTEL > +/* Micron Manufacturer ID assigned by JEDEC */ > +#define SNOR_MFR_MICRON_JEDEC CFI_MFR_MICRON Is this the ID Micron is going to use going forward? Brian > #define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> Micron */ > #define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX > #define SNOR_MFR_SPANSION CFI_MFR_AMD > -- > 1.9.1 > ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [PATCH 1/2] mtd: spi-nor: add Manufacturer ID for Micron 2015-12-10 2:45 ` Brian Norris @ 2015-12-10 3:00 ` Karl Zhang 张双锣 (karlzhang) 0 siblings, 0 replies; 10+ messages in thread From: Karl Zhang 张双锣 (karlzhang) @ 2015-12-10 3:00 UTC (permalink / raw) To: Brian Norris, Karl Zhang Cc: dwmw2@infradead.org, linux-mtd@lists.infradead.org, Peter Pan 潘栋 (peterpandong), Bean Huo 霍斌斌 (beanhuo), Zoltan Szubbocsev (zszubbocsev) > -----Original Message----- > From: Brian Norris [mailto:computersforpeace@gmail.com] > Sent: Thursday, December 10, 2015 10:45 AM > To: Karl Zhang > Cc: dwmw2@infradead.org; linux-mtd@lists.infradead.org; Peter Pan 潘栋 > (peterpandong); Bean Huo 霍斌斌 (beanhuo); Zoltan Szubbocsev > (zszubbocsev); Karl Zhang 张双锣 (karlzhang) > Subject: Re: [PATCH 1/2] mtd: spi-nor: add Manufacturer ID for Micron > > On Thu, Dec 10, 2015 at 01:58:59AM +0000, Karl Zhang wrote: > > Micron Manufacturer ID assigned by JEDEC is 2Ch. > > Add this ID, for new Spi NOR from Micron. > > > > ST's ID(20h) is Micron due to the history. > > > > Signed-off-by: Karl Zhang <karlzhang@micron.com> > > --- > > include/linux/mtd/cfi.h | 1 + > > include/linux/mtd/spi-nor.h | 2 ++ > > 2 files changed, 3 insertions(+) > > > > diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index > > 9b57a9b..cbf7716 100644 > > --- a/include/linux/mtd/cfi.h > > +++ b/include/linux/mtd/cfi.h > > @@ -377,6 +377,7 @@ struct cfi_fixup { > > #define CFI_MFR_SHARP 0x00B0 > > #define CFI_MFR_SST 0x00BF > > #define CFI_MFR_ST 0x0020 /* STMicroelectronics */ > > +#define CFI_MFR_MICRON 0x002C /* Micron */ > > #define CFI_MFR_TOSHIBA 0x0098 > > #define CFI_MFR_WINBOND 0x00DA > > > > diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h > > index fac3f6f..b858e93 100644 > > --- a/include/linux/mtd/spi-nor.h > > +++ b/include/linux/mtd/spi-nor.h > > @@ -22,6 +22,8 @@ > > */ > > #define SNOR_MFR_ATMEL CFI_MFR_ATMEL > > #define SNOR_MFR_INTEL CFI_MFR_INTEL > > +/* Micron Manufacturer ID assigned by JEDEC */ > > +#define SNOR_MFR_MICRON_JEDEC CFI_MFR_MICRON > > Is this the ID Micron is going to use going forward? > > Brian > The old products is using 0x20, but new product will going to use 0x2C. Both of them are Micron. Karl > > #define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> > Micron */ > > #define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX > > #define SNOR_MFR_SPANSION CFI_MFR_AMD > > -- > > 1.9.1 > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/2] mtd: spi-nor: add new device MT35X 2015-12-10 1:58 [PATCH 0/2] mtd: spi-nor: add new device MT35X Karl Zhang 2015-12-10 1:58 ` [PATCH 1/2] mtd: spi-nor: add Manufacturer ID for Micron Karl Zhang @ 2015-12-10 1:59 ` Karl Zhang 2015-12-10 2:47 ` Brian Norris 2015-12-10 2:46 ` [PATCH 0/2] " Brian Norris 2 siblings, 1 reply; 10+ messages in thread From: Karl Zhang @ 2015-12-10 1:59 UTC (permalink / raw) To: computersforpeace, dwmw2, linux-mtd Cc: peterpandong, beanhuo, zszubbocsev, Karl Zhang Micron has announced a new SPI NOR device MT35X(XTRMFlash). The device can support x1 or x8 bus I/O for high speed. This patch is purpose to add MT35X into the arch, only extended mode (x1) was enabled. Octal mode I/O will be done in the futrue. Signed-off-by: Karl Zhang <karlzhang@micron.com> --- drivers/mtd/devices/m25p80.c | 1 + drivers/mtd/spi-nor/spi-nor.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index c9c3b7f..e57d391 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -259,6 +259,7 @@ static const struct spi_device_id m25p_ids[] = { {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"}, {"mx25l25635e"},{"mx66l51235l"}, {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, + {"mt35x512"}, {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, {"s25fl064k"}, {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 3b2460e..34686b5 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -192,6 +192,7 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, switch (JEDEC_MFR(info)) { case SNOR_MFR_MICRON: + case SNOR_MFR_MICRON_JEDEC: /* Some Micron need WREN command; all will accept it */ need_wren = true; case SNOR_MFR_MACRONIX: @@ -756,6 +757,7 @@ static const struct flash_info spi_nor_ids[] = { { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, + { "mt35x512", INFO(0x2c5b1a, 0, 128 * 1024, 512, SECT_4K | USE_FSR) }, /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] mtd: spi-nor: add new device MT35X 2015-12-10 1:59 ` [PATCH 2/2] mtd: spi-nor: add new device MT35X Karl Zhang @ 2015-12-10 2:47 ` Brian Norris 2015-12-10 2:49 ` Bean Huo 霍斌斌 (beanhuo) 0 siblings, 1 reply; 10+ messages in thread From: Brian Norris @ 2015-12-10 2:47 UTC (permalink / raw) To: Karl Zhang Cc: dwmw2, linux-mtd, peterpandong, beanhuo, zszubbocsev, Karl Zhang On Thu, Dec 10, 2015 at 01:59:00AM +0000, Karl Zhang wrote: > Micron has announced a new SPI NOR device MT35X(XTRMFlash). > The device can support x1 or x8 bus I/O for high speed. > > This patch is purpose to add MT35X into the arch, only > extended mode (x1) was enabled. Octal mode I/O will be done > in the futrue. > > Signed-off-by: Karl Zhang <karlzhang@micron.com> > --- > drivers/mtd/devices/m25p80.c | 1 + > drivers/mtd/spi-nor/spi-nor.c | 2 ++ > 2 files changed, 3 insertions(+) > > diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c > index c9c3b7f..e57d391 100644 > --- a/drivers/mtd/devices/m25p80.c > +++ b/drivers/mtd/devices/m25p80.c > @@ -259,6 +259,7 @@ static const struct spi_device_id m25p_ids[] = { > {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"}, > {"mx25l25635e"},{"mx66l51235l"}, > {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, > + {"mt35x512"}, Did you read the text above this array? Brian > {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, > {"s25fl064k"}, > {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > index 3b2460e..34686b5 100644 > --- a/drivers/mtd/spi-nor/spi-nor.c > +++ b/drivers/mtd/spi-nor/spi-nor.c > @@ -192,6 +192,7 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, > > switch (JEDEC_MFR(info)) { > case SNOR_MFR_MICRON: > + case SNOR_MFR_MICRON_JEDEC: > /* Some Micron need WREN command; all will accept it */ > need_wren = true; > case SNOR_MFR_MACRONIX: > @@ -756,6 +757,7 @@ static const struct flash_info spi_nor_ids[] = { > { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, > { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, > { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, > + { "mt35x512", INFO(0x2c5b1a, 0, 128 * 1024, 512, SECT_4K | USE_FSR) }, > > /* PMC */ > { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, > -- > 1.9.1 > ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [PATCH 2/2] mtd: spi-nor: add new device MT35X 2015-12-10 2:47 ` Brian Norris @ 2015-12-10 2:49 ` Bean Huo 霍斌斌 (beanhuo) 2015-12-10 2:58 ` Karl Zhang 张双锣 (karlzhang) 0 siblings, 1 reply; 10+ messages in thread From: Bean Huo 霍斌斌 (beanhuo) @ 2015-12-10 2:49 UTC (permalink / raw) To: Brian Norris, Karl Zhang Cc: dwmw2@infradead.org, linux-mtd@lists.infradead.org, Peter Pan 潘栋 (peterpandong), Zoltan Szubbocsev (zszubbocsev), Karl Zhang 张双锣 (karlzhang) > > This patch is purpose to add MT35X into the arch, only extended mode > > (x1) was enabled. Octal mode I/O will be done in the futrue. > > > > Signed-off-by: Karl Zhang <karlzhang@micron.com> > > --- > > drivers/mtd/devices/m25p80.c | 1 + > > drivers/mtd/spi-nor/spi-nor.c | 2 ++ > > 2 files changed, 3 insertions(+) > > > > diff --git a/drivers/mtd/devices/m25p80.c > > b/drivers/mtd/devices/m25p80.c index c9c3b7f..e57d391 100644 > > --- a/drivers/mtd/devices/m25p80.c > > +++ b/drivers/mtd/devices/m25p80.c > > @@ -259,6 +259,7 @@ static const struct spi_device_id m25p_ids[] = { > > {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, > {"mx25l12805d"}, > > {"mx25l25635e"},{"mx66l51235l"}, > > {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, > > + {"mt35x512"}, > > Did you read the text above this array? > > Brian Karl , I think, you can remove this item in your next version patch. > > {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, > > {"s25fl064k"}, > > {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, > > diff --git a/drivers/mtd/spi-nor/spi-nor.c > > b/drivers/mtd/spi-nor/spi-nor.c index 3b2460e..34686b5 100644 > > --- a/drivers/mtd/spi-nor/spi-nor.c > > +++ b/drivers/mtd/spi-nor/spi-nor.c > > @@ -192,6 +192,7 @@ static inline int set_4byte(struct spi_nor *nor, > > const struct flash_info *info, > > > > switch (JEDEC_MFR(info)) { > > case SNOR_MFR_MICRON: > > + case SNOR_MFR_MICRON_JEDEC: > > /* Some Micron need WREN command; all will accept it */ > > need_wren = true; > > case SNOR_MFR_MACRONIX: > > @@ -756,6 +757,7 @@ static const struct flash_info spi_nor_ids[] = { > > { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | > USE_FSR | SPI_NOR_QUAD_READ) }, > > { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | > USE_FSR | SPI_NOR_QUAD_READ) }, > > { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | > USE_FSR | SPI_NOR_QUAD_READ) }, > > + { "mt35x512", INFO(0x2c5b1a, 0, 128 * 1024, 512, SECT_4K | > USE_FSR) }, > > > > /* PMC */ > > { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, > > -- > > 1.9.1 > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [PATCH 2/2] mtd: spi-nor: add new device MT35X 2015-12-10 2:49 ` Bean Huo 霍斌斌 (beanhuo) @ 2015-12-10 2:58 ` Karl Zhang 张双锣 (karlzhang) 0 siblings, 0 replies; 10+ messages in thread From: Karl Zhang 张双锣 (karlzhang) @ 2015-12-10 2:58 UTC (permalink / raw) To: Bean Huo 霍斌斌 (beanhuo), Brian Norris, Karl Zhang Cc: dwmw2@infradead.org, linux-mtd@lists.infradead.org, Peter Pan 潘栋 (peterpandong), Zoltan Szubbocsev (zszubbocsev) > -----Original Message----- > From: Bean Huo 霍斌斌 (beanhuo) > Sent: Thursday, December 10, 2015 10:49 AM > To: Brian Norris; Karl Zhang > Cc: dwmw2@infradead.org; linux-mtd@lists.infradead.org; Peter Pan 潘栋 > (peterpandong); Zoltan Szubbocsev (zszubbocsev); Karl Zhang 张双锣 > (karlzhang) > Subject: RE: [PATCH 2/2] mtd: spi-nor: add new device MT35X > > > > This patch is purpose to add MT35X into the arch, only extended mode > > > (x1) was enabled. Octal mode I/O will be done in the futrue. > > > > > > Signed-off-by: Karl Zhang <karlzhang@micron.com> > > > --- > > > drivers/mtd/devices/m25p80.c | 1 + drivers/mtd/spi-nor/spi-nor.c > > > | 2 ++ > > > 2 files changed, 3 insertions(+) > > > > > > diff --git a/drivers/mtd/devices/m25p80.c > > > b/drivers/mtd/devices/m25p80.c index c9c3b7f..e57d391 100644 > > > --- a/drivers/mtd/devices/m25p80.c > > > +++ b/drivers/mtd/devices/m25p80.c > > > @@ -259,6 +259,7 @@ static const struct spi_device_id m25p_ids[] = { > > > {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, > > {"mx25l12805d"}, > > > {"mx25l25635e"},{"mx66l51235l"}, > > > {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, > {"n25q512a"}, > > > + {"mt35x512"}, > > > > Did you read the text above this array? > > > > Brian > Karl , I think, you can remove this item in your next version patch. Ok, I will remove this line later, sorry for my mistake. > > > {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, > > > {"s25fl064k"}, > > > {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, > > > diff --git a/drivers/mtd/spi-nor/spi-nor.c > > > b/drivers/mtd/spi-nor/spi-nor.c index 3b2460e..34686b5 100644 > > > --- a/drivers/mtd/spi-nor/spi-nor.c > > > +++ b/drivers/mtd/spi-nor/spi-nor.c > > > @@ -192,6 +192,7 @@ static inline int set_4byte(struct spi_nor *nor, > > > const struct flash_info *info, > > > > > > switch (JEDEC_MFR(info)) { > > > case SNOR_MFR_MICRON: > > > + case SNOR_MFR_MICRON_JEDEC: > > > /* Some Micron need WREN command; all will accept it */ > > > need_wren = true; > > > case SNOR_MFR_MACRONIX: > > > @@ -756,6 +757,7 @@ static const struct flash_info spi_nor_ids[] = { > > > { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | > > USE_FSR | SPI_NOR_QUAD_READ) }, > > > { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | > > USE_FSR | SPI_NOR_QUAD_READ) }, > > > { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | > > USE_FSR | SPI_NOR_QUAD_READ) }, > > > + { "mt35x512", INFO(0x2c5b1a, 0, 128 * 1024, 512, SECT_4K | > > USE_FSR) }, > > > > > > /* PMC */ > > > { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, > > > -- > > > 1.9.1 > > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/2] mtd: spi-nor: add new device MT35X 2015-12-10 1:58 [PATCH 0/2] mtd: spi-nor: add new device MT35X Karl Zhang 2015-12-10 1:58 ` [PATCH 1/2] mtd: spi-nor: add Manufacturer ID for Micron Karl Zhang 2015-12-10 1:59 ` [PATCH 2/2] mtd: spi-nor: add new device MT35X Karl Zhang @ 2015-12-10 2:46 ` Brian Norris 2015-12-10 3:04 ` Karl Zhang 张双锣 (karlzhang) 2 siblings, 1 reply; 10+ messages in thread From: Brian Norris @ 2015-12-10 2:46 UTC (permalink / raw) To: Karl Zhang Cc: dwmw2, linux-mtd, peterpandong, beanhuo, zszubbocsev, Karl Zhang On Thu, Dec 10, 2015 at 01:58:58AM +0000, Karl Zhang wrote: > Micron has announced a new SPI NOR device MT35X (XTRMFlash). Announced? Do you have a flash sample? Did you test? Brian > This device's manufacturer ID is using 2Ch which arranged by > JEDEC. The 20h is also Micron's ID due to the history. > > This new device support high speed I/O interface. The clock > frequency could up to 200 MHz (MAX) in DDR (400 MB/s) with > DQS. The device bus width could be 1 or 8, and it's default > width is configurable. > > Karl Zhang (2): > mtd: spi-nor: add Manufacturer ID for Micron > mtd: spi-nor: add new device MT35X > > drivers/mtd/devices/m25p80.c | 1 + > drivers/mtd/spi-nor/spi-nor.c | 2 ++ > include/linux/mtd/cfi.h | 1 + > include/linux/mtd/spi-nor.h | 2 ++ > 4 files changed, 6 insertions(+) > > -- > 1.9.1 > ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [PATCH 0/2] mtd: spi-nor: add new device MT35X 2015-12-10 2:46 ` [PATCH 0/2] " Brian Norris @ 2015-12-10 3:04 ` Karl Zhang 张双锣 (karlzhang) 0 siblings, 0 replies; 10+ messages in thread From: Karl Zhang 张双锣 (karlzhang) @ 2015-12-10 3:04 UTC (permalink / raw) To: Brian Norris, Karl Zhang Cc: Peter Pan 潘栋 (peterpandong), Zoltan Szubbocsev (zszubbocsev), linux-mtd@lists.infradead.org, Bean Huo 霍斌斌 (beanhuo), dwmw2@infradead.org > > Micron has announced a new SPI NOR device MT35X (XTRMFlash). > > Announced? Do you have a flash sample? Did you test? > > Brian > Yes, we have samples, and tested it with SPI x1 I/O. Karl > > This device's manufacturer ID is using 2Ch which arranged by JEDEC. > > The 20h is also Micron's ID due to the history. > > > > This new device support high speed I/O interface. The clock frequency > > could up to 200 MHz (MAX) in DDR (400 MB/s) with DQS. The device bus > > width could be 1 or 8, and it's default width is configurable. > > > > Karl Zhang (2): > > mtd: spi-nor: add Manufacturer ID for Micron > > mtd: spi-nor: add new device MT35X > > > > drivers/mtd/devices/m25p80.c | 1 + > > drivers/mtd/spi-nor/spi-nor.c | 2 ++ > > include/linux/mtd/cfi.h | 1 + > > include/linux/mtd/spi-nor.h | 2 ++ > > 4 files changed, 6 insertions(+) > > > > -- > > 1.9.1 > > > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/ ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2015-12-10 3:05 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-12-10 1:58 [PATCH 0/2] mtd: spi-nor: add new device MT35X Karl Zhang 2015-12-10 1:58 ` [PATCH 1/2] mtd: spi-nor: add Manufacturer ID for Micron Karl Zhang 2015-12-10 2:45 ` Brian Norris 2015-12-10 3:00 ` Karl Zhang 张双锣 (karlzhang) 2015-12-10 1:59 ` [PATCH 2/2] mtd: spi-nor: add new device MT35X Karl Zhang 2015-12-10 2:47 ` Brian Norris 2015-12-10 2:49 ` Bean Huo 霍斌斌 (beanhuo) 2015-12-10 2:58 ` Karl Zhang 张双锣 (karlzhang) 2015-12-10 2:46 ` [PATCH 0/2] " Brian Norris 2015-12-10 3:04 ` Karl Zhang 张双锣 (karlzhang)
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox