Re: Bad block Management Patch

Re: Bad block Management Patch

[Boris Brezillon]

On Tue, 24 Jan 2017 04:56:47 +0000
"Anurag Raghavan (RBEI/ETW11)" <Raghavan.Anurag@in.bosch.com> wrote:

> Hi Boris,
> 
> 
> I am using kernel version-3.0.35
> I am facing uncorrectable ECC error in ubifs. I am suspecting, it is because of bad blocks are not properly handled in my driver.
> Is there any patches available to handle the bad block in the specified version...

Is this a joke? Now you're not even adding the mailing list in Cc, and
you keep giving too few information (I don't even remember what's your
NAND controller).

I suggested that you test a mainline kernel, and you keep asking for
patches on top of a really old kernel. And by the way, don't expect us
to do your job (you can use git log and try to apply the patches that
seem relevant to you, but I clearly won't do that for you).

So please stop asking us to fix your bugs unless you start listening to
our suggestions, and the first one is to try a newer kernel (4.9 for
example).

Thanks,

Boris

Re: Bad block Management Patch

[Richard Weinberger]

Raghavan Anurag,

On Tue, Jan 24, 2017 at 8:58 AM, Boris Brezillon
<boris.brezillon@free-electrons.com> wrote:
> On Tue, 24 Jan 2017 04:56:47 +0000
> "Anurag Raghavan (RBEI/ETW11)" <Raghavan.Anurag@in.bosch.com> wrote:
>
>> Hi Boris,
>>
>>
>> I am using kernel version-3.0.35
>> I am facing uncorrectable ECC error in ubifs. I am suspecting, it is because of bad blocks are not properly handled in my driver.
>> Is there any patches available to handle the bad block in the specified version...

This is not how community support works.
He happily help with recent kernels but debugging problems on
outdated kernels with vendor patches applied is out of scope.

What you expect from us is hard and takes a lot of time, we cannot
do that for free in our spare time.

-- 
Thanks,
//richard